Deposition time and annealing effects on morphological and optical properties of ZnS thin films prepared by chemical bath deposition
Source abstract
Abstract
Abstract Nanocrystalline zinc sulfide thin films were prepared on glass substrates by chemical bath deposition method using aqueous solutions of zinc chloride, thiourea ammonium hydroxide along with non-toxic complexing agent trisodium citrate in alkaline medium at 80 °C. The effect of deposition time and annealing on the properties of ZnS thin films was investigated by X-ray diffraction, scanning electron microscopy, optical transmittance spectroscopy and four-point probe method. The X-ray diffraction analysis showed that the samples exhibited cubic sphalerite structure with preferential orientation along 〈2 0 0〉 direction. Scanning electron microscopy micrographs revealed uniform surface coverage, UV-Vis (300 nm to 800 nm) spectrophotometric measurements showed transparency of the films (transmittance ranging from 69 % to 81 %), with a direct allowed energy band gap in the range of 3.87 eV to 4.03 eV. After thermal annealing at 500 °C for 120 min, the transmittance increased up to 87 %. Moreover, the electrical conductivity of the deposited films increased with increasing of the deposition time from 0.35 × 10 −4 Ω·cm −1 to 2.7 × 10 −4 Ω·cm −1 .
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Renewable Energies Laboratory (LER) / Jijel University , Algeria
Thin Films and Interfaces Laboratory , Constantine University , Algeria
ICTEAM/Université Catholique de Louvain (UCL) , Louvain-La-Neuve , Belgium
References (42)
Show source-provided references
1. [1] Hassanien A.S., Akl A.A., Superlattice. Microstruct, 89 (2016), 153.10.1016/j.spmi.2015.10.04410.1016/j.spmi.2015.10.044 ↗
2. [2] Huang Y.-H., Jie W.-Q., Zhou Y., Zha G.-Q., J. Alloy. Compd, 549 (2013), 184.10.1016/j.jallcom.2012.09.03110.1016/j.jallcom.2012.09.031 ↗
3. [3] Díaz Reye S.J., Castilloojeda R.S., Sánchezes Píndol A. R., curr. Appl, 15(2015), 103.
4. [4] Cha J.H., Kwon S.M., Bae J.A., Yang S.H., Jeon C.W., J. Alloy. Compd, 708 (2017),562.10.1016/j.jallcom.2017.03.02110.1016/j.jallcom.2017.03.021 ↗
5. [5] Lei Y., Chen F.F., Li R., Xu J., Appl. Surf. Sci, 308 (2014), 206.10.1016/j.apsusc.2014.04.13510.1016/j.apsusc.2014.04.135 ↗
6. [6] Piquette E.C., Bandic Z.Z., Mccaldin J.O., Mcgill T.C., J. Vac. Sci. Technol. B, (1997).
7. [7] Kurbatov D., Kshnyakina S., Opanasyuk A., Melnik V., Nesprava V., Rom. J. Phys., 55 (2010), 213.
8. [8] Bosco J.P., Demers S.B., Kimball G.M., Lewis N.S., J. Appl. Phys, 9 (2012).
9. [9] Wu X., Lai F., Lin L., Lvj., Zhuang B., Yan Q., Huang Z., Appl. Surf. Sci., 254 (2008), 6455.10.1016/j.apsusc.2008.04.02310.1016/j.apsusc.2008.04.023 ↗
10. [10] Xu G., Miao C., Liu G., Ye C., J. Mater. Chem.,11 (2012), 4890.10.1039/c2jm15908b10.1039/c2jm15908b ↗
11. [11] Liu T.Z., Ke H., Zhang H., Mater. Sci. Semicond. Proc., 26 ( 2014), 301.
12. [12] Khalifa Z.S., Mahmoud S.A., Physica E, 60 (2017), 91.10.1016/j.physe.2017.03.01010.1016/j.physe.2017.03.010 ↗
13. [13] Bhalerao B.A., Lokhande D.C., Wagh G.B., Nanotechnol.,6 (2013), 996.10.1109/TNANO.2013.227246910.1109/TNANO.2013.2272469 ↗
14. [14] Kriisa M., Kiirber E., Krunks M., Thin Solid Films, 87 (2014), 555.10.1016/j.tsf.2013.05.15010.1016/j.tsf.2013.05.150 ↗
15. [15] Haubi N.F., Midhjil K.A., Rashid H.G., Mansour H., Phys. Lett., 24 (2010).10.1142/S021798491002307410.1142/S0217984910023074 ↗
16. [16] Sultana J., Paul S., Karmakar A., Yi R., Dalapati G.K., Chattopadhyay S., Appl. Surf. Sci., 418 (2017), 380.10.1016/j.apsusc.2016.12.13910.1016/j.apsusc.2016.12.139 ↗
17. [17] Liu J., Wei A., Zhao Y., J. Alloy.Compd., 588 (2014), 228.10.1016/j.jallcom.2013.11.04210.1016/j.jallcom.2013.11.042 ↗
18. [18] Hariskos D., Spiering S., Powalla M., Thin Solid Films, 480(2005), 99.10.1016/j.tsf.2004.11.11810.1016/j.tsf.2004.11.118 ↗
19. [19] Wook S.S., Agawane G.L., Myeng G.G., Moholkar A.V., J. Alloy. Compd., (2012), 25.
20. [20] Shin S.W., Agawane G.L., Gangb M.G., Moholkarc A.V., Moon J.H., Kim J.H., Lee J.Y., J. Alloy. Compd., 526 (2012).10.1016/j.jallcom.2012.02.08410.1016/j.jallcom.2012.02.084 ↗
21. [21] Kassima., Nagalingam S., Arabian J. Chem., 249 (2010), 234.
22. [22] Dubrovin. I.V., Budennaya L.D., Mizetskaya I.B., Sharkina, Inorg. Mater., 19 (1983), 1603.
23. [23] Liang G., Fan P., Chenc., Luo J., Zhao J., Zhang D., Mater. Electron., 26 (2015), 2230.10.1007/s10854-015-2673-410.1007/s10854-015-2673-4 ↗
24. [24] Ozkan M., Ekem N., Pat S., Balba M.Z., Mater. Sci. Semicond. Proc., 15 (2012), 113.10.1016/j.mssp.2011.07.00410.1016/j.mssp.2011.07.004 ↗
25. [25] Ladar M., Popovici E.j., Baldea I., Grecu R., J. Alloy. Compd., 434 (2007), 697.10.1016/j.jallcom.2006.08.22610.1016/j.jallcom.2006.08.226 ↗
26. [26] Nakada T., Furumi K., Kunioka A., IEEE Trans. Elec. Dev., 46 (1999) 2093.10.1109/16.79200210.1109/16.792002 ↗
27. [27] Kang S.R., Shin S.W., Choi D.S., Moholkar A.V., Moon J.H., Kim J.H., Curr. Appl. Phys, 10 (2010), 437.10.1016/j.cap.2010.02.05210.1016/j.cap.2010.02.052 ↗
28. [28] Singh J., John. Wiley. Sons, (2006).
29. [29] Nien Y.T., Chen I.G., J. Alloy. Compd., 471 (2009), 553.10.1016/j.jallcom.2008.04.01210.1016/j.jallcom.2008.04.012 ↗
30. [30] Obaid A.S., Mahdi M.A., Ahmed Dihe A., Hassan Z., Appl. Sci. Manag., 2012 (2012), 26.
31. [31] Lokhande C.D., Patil P.S., Tributsch H., Ennaoui A., Sol. Eng. Mat. Sol. C., 55 (1998), 379.
32. [32] Ke H., Duo S., Liu T., Sun Q., Ruan C., Fei X., Tanj, Zhan S., Mater. Sci. Semicond. Proc., 18 (2014), 28.10.1016/j.mssp.2013.10.02210.1016/j.mssp.2013.10.022 ↗
33. [33] Fathy N., Kobayashi R., Ichimura M., Mater. Sci. Eng. B, 107 (2004), 271.10.1016/j.mseb.2003.11.02110.1016/j.mseb.2003.11.021 ↗
34. [34] Offiah S.U., Ugwoke P.E., Ekwealor A.B., Ezugwu S.C., Osuji R.U., Ezema F.I., Digest. J. Nanomater. Biostruct., 7 (2012), 165.
35. [35] Brewe RS. H., Franzen S., J. Alloy. Compd., 338 (2002), 73.10.1016/S0925-8388(02)00217-710.1016/S0925-8388(02)00217-7 ↗
36. [36] Arena O.L., Nair M.T.S., Nair P.K., Semicond. Sci. Technol., 12 (1997), 1323.10.1088/0268-1242/12/10/02210.1088/0268-1242/12/10/022 ↗
37. [37] Yang H., Zhao J., Song L., Mater. Lett, 15 (2003), 2287.10.1016/S0167-577X(02)01213-210.1016/S0167-577X(02)01213-2 ↗
38. [38] Kulkani D., Bull. Mater. Sci., 28 (2005), 43.10.1007/BF0271117110.1007/BF02711171 ↗
39. [39] Derbalia A., Saidia H., Attafa A., Benamraah., Bouhdjera A., Attafbn., Ezzaouiac H., J. Semicond, 9 (2018), 45.
40. [40] Bendjedidi H., Attaf A., Saidi H., Aida M.s., Semmari S.,bouhdjar A., Benkhetta Y., J. Semicond., 36 (2015), 12.10.1088/1674-4926/36/12/12300210.1088/1674-4926/36/12/123002 ↗
41. [41] Akl A.A., Mahmoud S.A., al-Shomar S.M., Hassanien A.S., Mater. Sci. Semicond. Proc., 74 (2018), 183.10.1016/j.mssp.2017.10.00710.1016/j.mssp.2017.10.007 ↗
42. [42] Hassanien A.S., Akl A.A., J. Alloy. Compd,. 648 (2015), 280.10.1016/j.jallcom.2015.06.23110.1016/j.jallcom.2015.06.231 ↗