Show source-provided references
1. Yuan, Y., Yuan, S., Wang, Y., Li, Q, Deng, Z., Xie, Y., et al., Nanostructure, mechanical properties, and corrosion resistance of super duplex stainless steel 2507 aged at 500°C, Crystals, 2023, 13: 243
10.3390/cryst13020243 ↗2. Köse, C., Topal, C., Dissimilar laser beam welding of AISI 2507 super duplex stainless to AISI 317L austenitic stainless steel, Mater. Sci. Eng. A, 2023, 862: 144476
10.1016/j.msea.2022.144476 ↗3. Wang, L., Ding, Y., Lu, Q., Guo, Z., Liu, Y., Cui, Z., Microstructure and corrosion behavior of welded joint between 2507 super duplex stainless steel and E690 low alloy steel, Corros. Commun., 2023, 11: 1–11
10.1016/j.corcom.2022.08.005 ↗4. Roos, S., Botero, C., Rännar, L.E., Electron beam powder bed fusion processing of 2507 super duplex stainless steel. as-built phase composition and microstructural properties, J. Mater. Res. Technol., 2023, 24: 6473–6483
10.1016/j.jmrt.2023.04.230 ↗5. Wang, Q., Gu, G., Jia, C., Li, K., Wu, C., Investigation of microstructure evolution, mechanical and corrosion properties of SAF 2507 super duplex stainless steel joints by keyhole plasma arc welding, J. Mater. Res. Technol., 2023, 22: 355–374
10.1016/j.jmrt.2022.11.107 ↗6. Sekar, C.B., Koteswara Rao, S.R., Vijayan, S., Boopathy, S.R., Effect of welding processes on ferrite content, microstructure and mechanical properties of super duplex stainless steel 2507 welds, Mater. Test., 2023, 65(12): 1836–1844
10.1515/mt-2023-0002 ↗7. Song, Q., Wang, H., Wang, W., Han, Z, Qian, Y., Wan, J., et al., Optimization of mechanical and surface properties of friction stir welded dissimilar joint of 2507 SDSS and 317L ASS by controlling process parameters, J. Mater. Res. Technol., 2024, 29: 416–426
10.1016/j.jmrt.2024.01.074 ↗8. Gupta, A., Kumar, A., Baskaran, T., Arya, S.B., Khatirkar, R.K., Effect of heat input on microstructure and corrosion behavior of duplex stainless steel shielded metal arc welds. Trans. Indian. Inst. Met., 2018, 71(7): 1595–1606
10.1007/s12666-018-1294-z ↗9. Lange, A., Influence of flame straightening on the properties of welded joints made of X2CrNi22-2 duplex steel, Mater. Sci. Pol., 2021, 39: 446–457
10.2478/msp-2021-0036 ↗10. Maurya, A.K., Chhibber, R., Pandey, C., GTAW dissimilar weldment of sDSS 2507 and nickel alloy for marine applications: microstructure–mechanical integrity, Metall. Mater. Trans. A., 2023, 54(8): 3311–3340
10.1007/s11661-023-07101-0 ↗11. El Sayed Seleman, M.M., Alateyah, A.I., Mahmoud, E.A.E., Elsoeudy, R.I., Ahmed, M.M.Z., Hafez, K.M., et al., Friction stir welding of 2507 super-duplex stainless steel: feasibility of butt joint groove filling at different process parameters, Adv. Mater. Process., 2024, 10(4): 40–64
10.1080/2374068X.2024.2385213 ↗12. Kumar, S., Yogesh, K., Vimal, K.E.K., Microstructural and corrosion behavior of thin sheet of stainless steel-grade super duplex 2507 by gas tungsten arc welding, SAE Int. J. Mater. Manuf., 2024, 17(2): 9
10.4271/05-17-02-0011 ↗13. Cojocaru, E.M., Raducanu, D., Vintilam, A.N., Alturaihi, S.S, Serban, N., Berbecaru, A.C., et al., Influence of ageing treatment on microstructural and mechanical properties of a solution treated UNS S32750/EN 1.4410/F53 Super Duplex Stainless Steel (SDSS) alloy, J. Mater. Res. Technol., 2020, 9(4): 8592–8605
10.1016/j.jmrt.2020.05.127 ↗14. Brum Walter, N.M., Braga Lemos, G.V., Kieckow, G.S., Buzzatti, D.T., Buzzatti, J.T., Mattei, F., et al., Investigating microstructure, mechanical properties, and pitting corrosion resistance of UNS S32760 super duplex stainless steel after linear friction welding, J. Mater. Res. Technol., 2024, 31: 1637–1643
10.1016/j.jmrt.2024.06.191 ↗15. Maurya, A.K., Kumar, N., Pandey, C., Chhibber, R., Structure–property relationship assessment of dissimilar gas tungsten arc welded joint of pipeline steel and super duplex stainless steel for marine applications, Arch. Civ. Mech. Eng., 2024, 24(3): 164
10.1007/s43452-024-00977-8 ↗16. Giorjão, R.A.R., Pereira, V.F., Terada, M., da Fonseca, E.B., Marinho, R.R., Garcia, D.M., et al., Microstructure and mechanical properties of friction stir welded 8mm pipe SAF 2507 super duplex stainless steel, J. Mater. Res. Technol., 2019, 8(1): 243–249
10.1016/j.jmrt.2018.01.002 ↗17. Maurya, A.K., Patnaik, A., Pandey, S.M., Chhibber, R., Pandey, C., Tribological performance of gas tungsten arc welded dissimilar joints of sDSS 2507/N50 steel, J. Mater. Eng. Perform., 2023, 33: 10280–10294
10.1007/s11665-023-08683-x ↗18. Abbasi, M., Tahaei, A., Vanani, B.B., Post-weld heat treatment and Nitrogen application in welding of super duplex stainless steels, In: Advances in Manufacturing for Aerospace Alloys, S. Gürgen, Springer Nature Switzerland, Cham, 2024, pp. 117–134
10.1007/978-3-031-64455-9_6 ↗19. Silva, D., Barbosa, E., Pardal, J.M., Barbosa, C., Tavares, S.S.M., Microstructural characterization of aged welded joints of a UNS S32750 superduplex stainless steel metallogr, Microstruct. Anal., 2024, 13: 570–581
20. Fande, A., Kalbande, V., Kavishwar, S., Tandon, V., Dhunde, A., Enhancing microstructure and mechanical properties of dissimilar TIG welded duplex 2205 and Ni-based inconel 718 superalloy through post weld heat treatment, Eng. Res. Express., 2024, 6(2): 025539
10.1088/2631-8695/ad4848 ↗21. Acuna, A., Riffel, K.C., Ramirez, A., Effect of sigma phase on CVN impact toughness in HDSS weld metal, Mater. Sci. Eng. A., 2024, 912: 146948
10.1016/j.msea.2024.146948 ↗22. Kumar, S., Vimal, K.E.K., Numerical and experimental studies of thin super duplex stainless steel GTAW joints, Int. J. Mater. Eng. Innov., 2024, 15(2): 157–171
10.1504/IJMATEI.2024.138606 ↗23. Kumar, N., Kumar, P., Investigation on microstructural and mechanical integrity of GTAW dissimilar welded joint of IN 718/ASS 304L using Ni-based filler IN 625 using EBSD and DHD techniques, Int. J. Press. Vessel. Pip.; 2024, 209: 105213
10.1016/j.ijpvp.2024.105213 ↗24. Abbasi, M., Vanani, B.B., Tahaei, A., Garagnani, G.L., Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A comparative investigation, Proc. Inst. Mech. Eng. Pt. L J. Mater. Des. Appl., 2024, 238(10): 14644207241236743
10.1177/14644207241236743 ↗25. Tabrizi, T.R, Sabzi, M., Anijdan, S.M., Eivani, A.R., Park, N., Jafarian, H.R., Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode, J. Mater. Res. Technol., 2021, 15: 199–212
10.1016/j.jmrt.2021.07.154 ↗26. Ramkumar, K.D., Mishra, D., Ganesh Raj, B., Vignesh, M.K., Thiruvengatam, G., Sudharshan, S.P., et al., Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750, Mater. Des., 2015, 66: 356–365
10.1016/j.matdes.2014.10.084 ↗27. Vahman, M., Shamanian, M., Golozar, M.A., Jalali, A., Sarmadi, M.A., Kangazian, J., The effect of welding heat input on the structure–property relationship of a new grade super duplex stainless steel, Steel Res. Int., 2020, 91(1): 1900347
10.1002/srin.201900347 ↗28. Srinivasan, S., Atrens, A., Effect of pulse gas tungsten arc welding on the metallurgical characteristics & microstructural evolution in AZ31B magnesium alloy welds, J. Mater. Res. Technol., 2024, 29: 295412–295424
10.2139/ssrn.4705450 ↗29. Shin, Y.T., Shin, H.S., Lee, H.W., Effects of heat input on pitting corrosion in super duplex stainless steel weld metals, Met. Mater. Int., 2012, 18(6): 1037–1040
10.1007/s12540-012-6017-0 ↗30. Kordatos, J.D., Fourlaris, G., Papadimitriou, G., The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds, Scr. Mater., 2001, 44(3): 401–408
10.1016/S1359-6462(00)00613-8 ↗31. Tavares, S.S.M., Pardal, J.M., Lima, L.D., Bastos, I.N., Nascimento, A.M., Souzam, J.A., Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless steel UNS S32750, Mater. Charact., 2007, 58(7): 610–616
10.1016/j.matchar.2006.07.006 ↗32. Yousefieh, M., Shamanian, M., Saatchi, A., Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method, J. Alloy. Compd., 2011, 509(3): 782–788
10.1016/j.jallcom.2010.09.087 ↗33. Srirangan, A.K., Paulraj, S., Multi-response optimization of process parameters for TIG welding of Incoloy 800HT by Taguchi grey relational analysis, Eng. Sci. Technol. Int. J., 2016, 19(2): 811–817
10.1016/j.jestch.2015.10.003 ↗34. Magudeeswaran, G., Nair, S.R., Sundar, L., Harikannan, N., Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds, Def. Technol., 2014, 10(3): 251–260
10.1016/j.dt.2014.06.006 ↗35. Madugula, N.S., Kumar, Y., Vimal, K.E.K., Kumar, S., Benchmarking the quality improvement strategies of wire arc additive manufacturing process using fuzzy QFD approach, Rapid Prototyp. J., 2024, 30(5): 876–884
10.1108/RPJ-08-2023-0278 ↗36. Kumar, S., Vimal, K.E.K., Karpagaraj, A., Mechanical characterization and simulation of PCGTAW welded thin sheet of SDSS material, Mater. Today: Proc., 2022, 60: 452–458
10.1016/j.matpr.2022.01.318 ↗37. Kumar, S., Madugula, N.S., Kumar, R., Kumar, N., Giri, J., Kanan, M., An extensive analysis of GTAW process and its influence on the microstructure and mechanical properties of SDSS 2507, J. Mater. Res. Technol., 2024, 33: 8675–8686
10.1016/j.jmrt.2024.11.157 ↗38. Sordetti, F., Palombi, A., Varone, A., Picco, N., Magnan, M., Marin, E., et al., Experimental review and accuracy of etchants used for phase analysis of SAF2507 Super Duplex Stainless Steel, J. Mater. Res. Technol., 2024, 32: 3842–3856
10.1016/j.jmrt.2024.08.191 ↗39. Çetinarslan, C.S., Sahin, M., Karaman Genç, S., Sevil, C., Mechanical and metallurgical properties of ion-nitrided austenitic-stainless steel welds, Mater. Sci. Pol., 2012, 30: 303–312
10.2478/s13536-012-0052-x ↗40. Yelamasetti, B.G., Vardhan, V., Optimization of GTAW parameters for the development of dissimilar AA5052 and AA6061 joints, Mater. Today Proc., 2021, 47: 4350–4356
10.1016/j.matpr.2021.04.633 ↗41. Kumar, S., Vimal, K.E.K., Khan, M.A., Kumar, Y., A hybrid learning approach for modelling the fabrication of super duplex stainless steel thin joints using GTAW process. Int. J. Interact. Des. Manuf., 2024, 18(5): 3001–3014
10.1007/s12008-023-01413-6 ↗