journal article·2019-06-01Open access

The effects of deposition potential on the optical, morphological and mechanical properties of DLC films produced by electrochemical deposition technique at low voltages

Naim Aslan, Necati Başman, Orhan Uzun, Mustafa Erkovan, Fahrettin Yakuphanoğlu

Materials Science-Poland· Volume 37· Issue 2

Abstract

Abstract Diamond-like carbon (DLC) films were electrochemically deposited onto indium tin oxide (ITO) substrates using acetic acid and deionized water as electrolyte at low deposition voltages (2.4 V and 60 V). The transmittance of the films was investigated by UV spectrometry. Transmittance measurements versus wavelength revealed that the films transmit 86 % to 89 % light in visible region and band gap of the films varies between 3.87 eV and 3.89 eV. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used for structural characterization to evaluate surface morphology of the DLC films. The grain size and the surface roughness increased for the films prepared at higher deposition potential, while their measured average height decreased. The mechanical properties (hardness H and elastic modulus E r ) were determined from load-displacement curves which were obtained by using nanoindentation method. Hardness and elastic modulus of the films increased as the deposition voltage of the films increased from 2.4 V to 60 V.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Munzur University , Department of Metallurgical and Materials Engineering , Tunceli , Turkey

Sakarya University , Department of Metallurgical and Materials Engineering , Sakarya , Turkey

Sakarya University of Applied Sciences , Depart. of Metallurgical and Materials Engineering , Sakarya , Turkey

Bülent Ecevit University , Department of Electrical and Electronics Engineering , Zonguldak , Turkey

Rectorate of Bartın University , Bartın , Turkey

Ankara University , Department of Physics , Ankara , Turkey

Fırat University , Department of Physics , Elazıg , Turkey

References (23)

Show source-provided references
1. [1] Basman N., Aslan N., Uzun O., Cankaya G., Kolemen U., Microelec. Eng., 140 (2015), 18.10.1016/j.mee.2015.05.00110.1016/j.mee.2015.05.001 ↗
2. [2] Gupta S., Chowdhury M.P., Pal A.K., Dia. Rel. Mater., 13 (2004), 1680.10.1016/j.diamond.2004.02.00610.1016/j.diamond.2004.02.006 ↗
3. [3] Yan X.B., Xu T., Chen G., Liu H.W., Yang S.R., Carbon, 42 (2004), 3103.10.1016/j.carbon.2004.07.01610.1016/j.carbon.2004.07.016 ↗
4. [4] Nery R.P.O.S., Bonelli R.S., Camargo JR S.S., J. of Mater. Sci., 45 (2010), 5472.10.1007/s10853-010-4602-510.1007/s10853-010-4602-5 ↗
5. [5] Zhou B., Rogachev A.V., Liu Z.H., Jiang X., Shen R., Rudenkov A.S., Surf. Coat. Technol., 208 (2012), 101.10.1016/j.surfcoat.2012.08.02410.1016/j.surfcoat.2012.08.024 ↗
6. [6] Chaus A.S., Fedosenko T.N., Rogachev A.V., ČaploviČ L., Dia. Rel. Mater., 42 (2014), 64.10.1016/j.diamond.2014.01.00110.1016/j.diamond.2014.01.001 ↗
7. [7] Libardi J., Grigorov K., Massi M., Otani C., Ravagnani S.P., Maciel H.S., Guerino M., Ocampo J.M.J., Thin Solid Films, 459 (2004), 282.10.1016/j.tsf.2003.12.13110.1016/j.tsf.2003.12.131 ↗
8. [8] Sanchez N.A., Rincon C., Zambrano G., Galindo H., Prieto P., Thin Solid Films, 373 (2000), 247.10.1016/S0040-6090(00)01090-710.1016/S0040-6090(00)01090-7 ↗
9. [9] Seker Z., Ozdamar H., Esen M., Esen R., Kavak H., Appl. Surf. Sci., 314 (2014), 46.10.1016/j.apsusc.2014.06.13710.1016/j.apsusc.2014.06.137 ↗
10. [10] Mosayebi M.J., Hosseini S.R., Surf. Eng., 31(2015), 96.10.1179/1743294414Y.000000039510.1179/1743294414Y.0000000395 ↗
11. [11] Guo P., Sun L., Li X., Xu S., Ke P., Wang A., Thin Solid Films, 584 (2015), 289.10.1016/j.tsf.2015.01.01810.1016/j.tsf.2015.01.018 ↗
12. [12] Cao C., Zhu H., Wang H., Thin Solid Films, 368 (2000), 203.10.1016/S0040-6090(00)00765-310.1016/S0040-6090(00)00765-3 ↗
13. [13] Roy R.K., Deb B., Bhattacharjee B., Pal A.K., Thin Solid Films, 422 (2002), 92.10.1016/S0040-6090(02)00976-810.1016/S0040-6090(02)00976-8 ↗
14. [14] Robertson, J., Mater.Sci. and Eng. R,37 (2002), 129.10.1016/S0927-796X(02)00005-010.1016/S0927-796X(02)00005-0 ↗
15. [15] Sreejith K., Nuwad J., Pillai C.G.S., Appl. Surf. Sci., 252 (2005), 296.10.1016/j.apsusc.2004.11.09110.1016/j.apsusc.2004.11.091 ↗
16. [16] Wan S., Wang L., Xue Q., Electroch. Comm., 12 (2010), 61.10.1016/j.elecom.2009.10.03610.1016/j.elecom.2009.10.036 ↗
17. [17] Oliver W.C., Pharr G.M., J. Mater. Res., 7 (1992), 1564.10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
18. [18] Manifacier J.C., Gasiot J., Fillard J.P., J. Phys. E, 9 (1976), 1002.10.1088/0022-3735/9/11/03210.1088/0022-3735/9/11/032 ↗
19. [19] Swanopel R., J. Phys. E, 16 (1983), 1214.10.1088/0022-3735/16/12/02310.1088/0022-3735/16/12/023 ↗
20. [20] Pankove J.I., Optical process in semiconductors, Dover Publications, New York, 2010.
21. [21] Uzun O., Başman N., Alkan C., Kölemen U., Yilmaz F., Poly. Bull., 66 (2011), 649.10.1007/s00289-010-0361-310.1007/s00289-010-0361-3 ↗
22. [22] Bartali R., Micheli V., Gottardi G., Vaccari A., Laidani N., Surf. Coat. Technol., 204 (2010), 2073.10.1016/j.surfcoat.2009.11.00210.1016/j.surfcoat.2009.11.002 ↗
23. [23] Gong J., Wu J., Guan Z., J. Eur. Ceram. Soc., 19 (1999), 2625.10.1016/S0955-2219(99)00043-610.1016/S0955-2219(99)00043-6 ↗