Flexural strength of low-strength RC beams using CFRP composite
Source abstract
Abstract
Abstract Over the past few decades, utilizing fiber-reinforced polymer in strengthening or rehabilitation of structural members has become a highly promising technique to extend reinforced concrete (RC) structures' lifespan and enhance their structural integrity. Rehabilitation of old structures is necessary due to various factors, including harsh environments, earthquakes, increased loads, corrosion in reinforcement, and inadequate design. Numerous studies have examined the strengthening of RC beams in shear and flexure using carbon fiber reinforced polymer (CFRP) composites with different schemes, including bonding CFRP externally, through experimental and theoretical investigations. In this study, a series of eight RC beams was cast with low-strength concrete. The beams were designed to be weak in flexural. Flexural critical RC beams were strengthened with different CFRP application schemes. The experimental findings were validated through both numerical and analytical analyses, demonstrating close agreement. The results indicate that the application of CFRP laminate or fabric increased the ultimate load in flexural strengthening applications by approximately 40–60%, particularly when CFRP was bonded to the bottom soffit with CFRP U-jacketing placed at both ends. Furthermore, placing a 50 cm CFRP U-jacket at both ends of RC beams, critical in flexural and strengthened using a CFRP laminate at the soffit of the section, led to a 120% increase in load capacity with elastic behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Masonry and Concrete Structural Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Highway and Bridge Engineering, Technical College of Engineering, Duhok Polytechnic University (DPU) , Duhok , Kurdistan Region , Iraq
References (41)
Show source-provided references
1. Obaidat, Y.T., Heyden, S., Dahlblom, O., Abu-Farsakh, G., Abdel-Jawad, Y., Retrofitting of reinforced concrete beams using composite laminates, Constr. Build. Mater., 2011, 25(2): 591–59710.1016/j.conbuildmat.2010.06.082 ↗
2. Askar, M., Abduka, K., Askar, L., Seismic vulnerability assessment of reinforced concrete structures in Kurdistan Region-Iraq, J. Duhok Univ., 2020, 23(2): 116–13010.26682/csjuod.2020.23.2.10 ↗
3. Hashemi, S., Strengthening of concrete structures using carbon fibre reinforced polymers and cement-based adhesives, Monash University, 2011
4. Askar, M.K., Selman, M.H., Mohammed, S.I., Mechanical properties of concrete reinforced with alternative fibers, J. Duhok Univ., 2020, 23(1): 149–15810.26682/csjuod.2020.23.1.16 ↗
5. Miakhil, S.U., Shakir, W.U., Singh, G., Retrofitting of reinforced concrete beams using CFRP sheets: A review, Strain, 2020, 70: 90
6. Ilki, A., Kumbasar, N., Koc, V., Low strength concrete members externally confined with FRP sheets, Struct. Eng. Mech., 2004, 18(2): 167–19410.12989/sem.2004.18.2.167 ↗
7. Anil, Ö., Strengthening of RC T-section beams with low strength concrete using CFRP composites subjected to cyclic load, Constr. Build. Mater., 2008, 22(12): 2355–236810.1016/j.conbuildmat.2007.10.003 ↗
8. Dias, S., Barros, J., Shear strengthening of RC T-section beams with low strength concrete using NSM CFRP laminates, Cem. Concr. Compos., 2011, 33(2): 334–34510.1016/j.cemconcomp.2010.10.002 ↗
9. Confrere, A., Michel, L., Ferrier, E., Chanvillard, G., Experimental behaviour and deflection of low‐strength concrete beams reinforced with FRP bars, Struct. Concr., 2016, 17(5): 858–87410.1002/suco.201500046 ↗
10. Guo, R., Ren, Y., Li, M., Hu, P., Du, M., Zhang, R., Experimental study on flexural shear strengthening effect on low-strength RC beams by using FRP grid and ECC, Eng. Struct., 2021, 227: 11143410.1016/j.engstruct.2020.111434 ↗
11. Fib Bulletin TG, Externally bonded FRP reinforcement for RC structures, Vol. 14, International Federation for Structural Concrete, Switzerland, 2001
12. Climaco, J.C.T.S., Repair of structural concrete involving the addition of new concrete, Polytechnic of Central London, 1990
13. Ersoy, U., Repair and Strengthening of RC Structures. in International Symposium on Earthquake Disaster Prevention”, CENAPRED, Mexico City, 1992
14. Belarbi, A., Acun, B., FRP systems in shear strengthening of reinforced concrete structures, Procedia Eng., 2013, 57: 2–810.1016/j.proeng.2013.04.004 ↗
15. Abo-Alanwar, M., Elbatal, S., A smart reinforced steel wire mesh U-shape jacketing technique in strengthening and retrofitting RC beams, Int. J. Eng. Res. & Technol. (IJERT), 2015, 4(12): 46–55.
16. Joseph, J.P., Jose, A., Varghese, G.M., Retrofitting of RC beams: A review, Appl. Mech. Mater., 2017, 857: 206–21110.4028/www.scientific.net/AMM.857.206 ↗
17. Jumaat, M.Z., Kabir, M., Obaydullah, M., A review of the repair of reinforced concrete beams, J. Appl. Sci. Res., 2006, 2(6): 317–326
18. Saribiyik, A., Caglar, N., Flexural strengthening of RC beams with low-strength concrete using GFRP and CFRP, Struct. Eng. Mech., 2016, 58(5): 825–84510.12989/sem.2016.58.5.825 ↗
19. Remennikov, A., Goldston, M., Sheikh, M.N., Impact performance of concrete beams externally bonded with carbon FRP sheets. in Mechanics of Structures and Materials: Advancements and Challenges–Hao & Zhang (Eds). Conference: Proceedings of the 24th Australian Conference on the Mechanics of Structures and Materials (ACMSM24), At Perth, Australia, 2016
20. Huo, J., Li, Z., Zhao, L., Liu, J., Xiao, Y., Dynamic behavior of carbon fiber-reinforced polymer-strengthened reinforced concrete beams without stirrups under impact loading, ACI Struct. J., 2018, 115(3): 775–78710.14359/51701283 ↗
21. Osman, B.H., Wu, E., Ji, B., Abdulhameed, S.S., Repair of pre-cracked reinforced concrete (RC) beams with openings strengthened using FRP sheets under sustained load, Int. J. Concr. Struct. Mater., 2017, 11(1): 171–18310.1007/s40069-016-0182-3 ↗
22. Singh, S.B., Analysis and design of FRP reinforced concrete structures, McGraw Hill Professional, 2015
23. ASTM-D-3039-2000, Tensile Properties of Polymer Matrix Composite Materials, West Conshohocken, ASTM International, 2000, PA 19428-2959 United states
24. ACI-4402R-17, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, 2017
25. Boumaaza, M., Linger, L., fib Bulletin 112, Struct. Concr., 2024, 25: 4119–412410.1002/suco.202470050 ↗
26. Grelle, S.V., Sneed, L.H., Review of anchorage systems for externally bonded FRP laminates, Int. J. Concr. Struct. Mater., 2013, 7(1): 17–3310.1007/s40069-013-0029-0 ↗
27. Li, K., Cao, S., Yang, Y., Zhu, J., Bond–slip relationship for CFRP sheets externally bonded to concrete under cyclic loading, Materials, 2018, 11(3): 33610.3390/ma11030336 ↗
28. Anil, Ö., Belgin, Ç.M., Anchorages effects on CFRP-to-concrete bond strength, J. Reinforced Plast. Compos., 2010, 29(4): 539–55710.1177/0731684408100259 ↗
29. Al-Zubaidy, H.A.A.B., Behaviour of bond between CFRP sheet and steel under impact tensile loading, Monash University, 201210.1016/j.compstruct.2012.04.025 ↗
30. Schnerch, D.A., Strengthening of steel structures with high modulus carbon fiber reinforced polymer (CFRP) materials, North Carolina State University, 2005
31. Shahawy, M., Mirmiran, A., Beitelman, T., Tests and modeling of carbon-wrapped concrete columns, Compos. Part. B: Eng., 2000, 31(6–7): 471–48010.1016/S1359-8368(00)00021-4 ↗
32. Harries, K.A., Kharel, G., Behavior and modeling of concrete subject to variable confining pressure, Mater. J., 2002, 99(2): 180–18910.14359/11711 ↗
33. Fawzia, S., Bond characteristics between steel and carbon fibre reinforced polymer (CFRP) composites [Ph. D. thesis], Melbourne, Australia, Monash University, 2007
34. Watanabe, K., Nakamura, H., Honda, Y., Toyoshima, M., Iso, M., Hujimaki, T., et al. Confinement effect of FRP sheet on strength and ductility of concrete cylinders under uniaxial compression. in Non-Metallic (FRP) Reinforcement for Concrete Structures. Japan Concrete Institute. Proceedings of the Third International Symposium, 1997
35. Matthys, S., Taerwe, L., Audenaert, K., Tests on axially loaded concrete columns confined by fiber reinforced polymer sheet wrapping, Spec. Publ., 1999, 188: 217–228
36. Al-Kamaki, Y.S., Al-Mahaidi, R., Bennetts, I., Strength model for heat-damaged reinforced concrete circular columns confined with carbon fibre reinforced polymer fabrics, J. Reinforced Plast. Compos., 2015, 34(22): 1833–185510.1177/0731684415601901 ↗
37. Al-Hadithi, A., Abdulrahman, M., Al-Rawi, M., Flexural behaviour of reinforced concrete beams containing waste plastic fibers, in IOP Conference Series: Materials Science and Engineering, IOP Publishing, 202010.1088/1757-899X/737/1/012173 ↗
38. ACI-318M-19, Building code requirements for structural concrete and commentary, 2019
39. Collins, M.P., Mitchell, D., Prestressed concrete structures, Vol. 9, Englewood Cliffs, NJ, Prentice Hall, 1991
40. Park, R., Paulay, T., Reinforced concrete structures, John Wiley & Sons, 1991
41. Godat, A., Chaallal, O., Obaidat, Y., Non-linear finite-element investigation of the parameters affecting externally-bonded FRP flexural-strengthened RC beams, Results Eng., 2020, 8: 10016810.1016/j.rineng.2020.100168 ↗