Effect of the electrodeposition potential on the magnetic properties of FeCoNi films
Source abstract
Abstract
Abstract The effect of electrodeposition potential on the magnetic properties of the FeCoNi films has been reported in this paper. The FeCoNi electrodeposition was carried out from sulfate solution using potentiostatic technique. The obtained FeCoNi films were characterized by X-ray diffractometer (XRD), atomic absorption spectrometer (AAS) and vibrating sample magnetometer (VSM). It has been shown that the electrodeposition potential applied during the synthesis process determines the magnetic characteristics of FeCoNi films. The more negative potential is applied, the higher Ni content is in the FeCoNi alloy. At the same time, Co and Fe showed almost similar trend in which the content decreased with an increase in applied potential. The mean crystallite size of FeCoNi films was ranging from 11 nm to 15 nm. VSM evaluation indicated that the FeCoNi film is a ferromagnetic alloy with magnetic anisotropy. The high saturation magnetization of FeCoNi film was ranging from 86 A·m 2 /kg to 105 A·m 2 /kg. The film is a soft magnetic material which was revealed by a very low coercivity value in the range of 1.3 kA/m to 3.7 kA/m. Both the saturation magnetization and coercivity values decreased at a more negative electrodeposition potential.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Magnetic properties of thin films · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Faculty of Mathematics and Sciences , Universitas Negeri Jakarta , Jl. Rawamangun Muka, Jakarta 13220 , Indonesia
Department of Physics, Faculty of Mathematics and Natural Sciences , Universitas Indonesia , Depok 16424 , Indonesia
References (26)
Show source-provided references
1. [1] Osaka T., Takai M., Hayashi K., Ohashi K., Nature, 392 (1998), 796.10.1038/3388810.1038/33888 ↗
2. [2] Luciu I., Duday D., Choquet P., Perigo E.A., Michels A., Wirtz T., Appl. Surf. Sci., 389 (2016), 578.10.1016/j.apsusc.2016.07.12610.1016/j.apsusc.2016.07.126 ↗
3. [3] Pikula T., Oleszak D., Marek P., J. Magn. Magn. Mater., 320 (2008), 413.10.1016/j.jmmm.2007.06.020
4. [4] Fu P., Chen G., Xu Y., Cai P., Wang X.H., Mater. Sci.-Poland, 30 (2012), 259.10.2478/s13536-012-0031-210.2478/s13536-012-0031-2 ↗
5. [5] Raanaei H., Eskandari H., Mohammad-Hosseini V., J. Magn. Magn. Mater., 398 (2016), 190.10.1016/j.jmmm.2015.09.03110.1016/j.jmmm.2015.09.031 ↗
6. [6] Baghbaderani H.A., Shara S., Chermahini M.D., Powder Technol., 230 (2012), 241.10.1016/j.powtec.2012.07.03910.1016/j.powtec.2012.07.039 ↗
7. [7] Shakya P., Cox B., Davis D., J. Magn. Magn. Mater., 324 (2012), 453.10.1016/j.jmmm.2011.08.02310.1016/j.jmmm.2011.08.023 ↗
8. [8] Duan Y., Zhang Y., Wang T., Gu S., Xin L., Xingzun L.V., Mater. Sci. Eng. B-Adv., 185 (2014), 86.
9. [9] Ali G.A.M., Yusoff M.M., Ng Y.H., Lim H.N., Chong K.F., Curr. Appl. Phys., 15 (2015), 1143.10.1016/j.cap.2015.06.02210.1016/j.cap.2015.06.022 ↗
10. [10] Daud A.r., Budi S., Radiman S., Sains Malaysiana, 40 (2011), 1019.
11. [11] Hanafi I., Daud A.R., Radiman S., Gani M.H.A., Budi S., J. Phys. Conf. Ser., 431 (2013), 1.10.1088/1742-6596/431/1/01201310.1088/1742-6596/431/1/012013 ↗
12. [12] Hanafi I., Daud A.R., Radiman S., Port. Electrochim. Acta, 35 (2017), 1.10.4152/pea.20170100110.4152/pea.201701001 ↗
13. [13] Talik E., Guzik A., Zajdel P., Lipińska L., Baran M., Szubka M., Mater. Res. Bull., 83 (2016), 56.10.1016/j.materresbull.2016.05.01810.1016/j.materresbull.2016.05.018 ↗
14. [14] Akbulut S., Akbulut A., Özdemir M., Yildiz F., J. Magn. Magn. Mater., 390 (2015), 137.10.1016/j.jmmm.2015.04.06110.1016/j.jmmm.2015.04.061 ↗
15. [15] Budi S., Hafizah M.e., Manaf A., AIP, 1746 (2016), 020012-1.10.1063/1.4953937 ↗
16. [16] Budi S., Kurniawan B., Mott D.M., Maenosono S., Umar A.A., Manaf A., Thin Solid Films, 642 (2017), 51.10.1016/j.tsf.2017.09.01710.1016/j.tsf.2017.09.017 ↗
17. [17] Xiao L., Chen Z., Feng C., Liu L., Bai Z.-Q., Wang Y., Qian L., Zhang Y., Li Q., Jiang K., Fan S., Nano Lett., 8 (2008), 4539.10.1021/nl802750z1936797610.1021/nl802750z ↗
18. [18] Lee H., Wang L., Bain J.A., Laughlin D.E., IEEE T. Magn., 41 (2005), 654.10.1109/TMAG.2004.83804110.1109/TMAG.2004.838041 ↗
19. [19] Budi S., Daud A.R., Radiman S., Umar A.A., Appl. Surf. Sci., 257 (2010), 1027.10.1016/j.apsusc.2010.07.10310.1016/j.apsusc.2010.07.103 ↗
20. [20] Matlosz M., J. Electrochem. Soc., 140 (1993), 2272.10.1149/1.222080710.1149/1.2220807 ↗
21. [21] Grazulis S., Chateigner D., Downs R.T., Yokochi A.F.T., Quirós M., Lutterotti L., Manakova E., Butkus J., Moeck P., Le Bail A., J. Appl. Crystallogr., 42 (2009), 726.10.1107/S002188980901669032537302247777310.1107/S0021889809016690 ↗
22. [22] Veith M., Bubel C., Zimmer M., Dalt. Trans., 40 (2011), 6028.10.1039/c1dt10067j2154139010.1039/c1dt10067j ↗
23. [23] Dolati A., Sababi M., Nouri E., Ghorbani M., Mater. Chem. Phys., 102 (2007), 118.10.1016/j.matchemphys.2006.07.00910.1016/j.matchemphys.2006.07.009 ↗
24. [24] Yang Y., Int. J. Electrochem. Sci., 10 (2015), 5164.10.1016/S1452-3981(23)06694-410.1016/S1452-3981(23)06694-4 ↗
25. [25] Cullity B.D., Graham C.D., Introduction to Magnetic Materials, John Wiley & Sons, New Jersey, 2008.10.1002/978047038632310.1002/9780470386323 ↗
26. [26] Veligatla M., Katakam S., Das S., Dahotre N., Gopalan R., Prabhu D., Babu D.A., Choi-Yim H., Mukherjee S., Metall. Mater. Trans., A 46 (2015), 1019.10.1007/s11661-014-2714-210.1007/s11661-014-2714-2 ↗