Insights into the multistep transformation of titanate nanotubes into nanowires and nanoribbons
Source abstract
Abstract
Abstract Different types of titanate one-dimensional nanostructured materials were synthesized and characterized using scanning and transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The results presented in this work unquestionably showed dependence of morphology and structure of the titanate nanopowders on parameters of hydrothermal synthesis. It was found that nanotubes, nanowires and nanoribbons are three unavoidable kinetic products of hydrothermal reaction. Moreover, increasing temperature of reaction or hydrothermal treatment duration results in acceleration of nanotube-nanowire-nanoribbon transformation. However, the sequence of titanate morphology transformation is invariable. The detailed studies further revealed that the crystal structure of hydrothermally prepared nanotubes and nanowires are indistinguishable but the determination of the exact structure is practically impossible. Because of higher crystallinity, the structure of nanoribbons can be established. It was shown that it corresponds to the monoclinic layered trititanic acid H2Ti3O7 and is isostructural with sodium derivatives Na2_xHxTi3O7.nH20 (with x near 2).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wrocław University of Technology, Department of Mechanics, Materials Science and Engineering, Smoluchowskiego 25, 50-370 Wrocław, Poland
Wrocław University of Technology, Faculty of Chemistry, Smoluchowskiego 23, 50-370 Wroclaw, Poland
References (31)
Show source-provided references
1. Tiwari J.N., Tlwari R.N., Klm K.S., Prog. Mater. Sci., 57 (2012), 724.10.1016/j.pmatsci.2011.08.003 ↗
2. Fang X., Zhang L., J. Mater. Sci. Technol., 22 (2006), 1.
3. Xia Y., Yang P., Sun Y., Wu Y, Mayers B., Gates B., Yin Y, Kim F., Yan H., Adv. Mater, 15 (5) (2003), 353.10.1002/adma.200390087 ↗
4. Iijima S., Nature, 354 (1991), 56.10.1038/354056a0 ↗
5. Ramasamy P., Lim D.-H., Kim J., Kim J., RSC Adv., 4 (2014), 2858.10.1039/C3RA45506H ↗
6. Tohr S., Inorganic and Metallic Nanotubular Materials, Springer, Berlin Heidelberg, 2010, p. 17.
7. Bavykin D.V., Walsh F.C., Eur. J. Inorg. Chem., 8 (2009), 977.10.1002/ejic.200801122 ↗
8. Bavykin D.V., Friedrich J.M., Walsh F.C., Adv.Mater., 18 (2006), 2807.10.1002/adma.200502696 ↗
9. Yuan Z.-Y, Su B.-L., Colloid. Surface. A, 241 (2004), 173.10.1016/j.colsurfa.2004.04.030 ↗
10. Morgan D.L., Zhu H.-Y, Frost R.L., Waclawik E.R., Chem. Mater, 20 (2008), 3800.10.1021/cm800077e ↗
11. Lan Y, Gao X., Zhu H., Zheng Z., Yan T., Wu R, Ringer S.P., Song D., Adv. Funct. Mater., 15 (2005), 1310.10.1002/adfm.200400353 ↗
12. Wu D., Liu J., Zhao X., Li A., Chen Y, Ming N., Chem. Mater, 18 (2006), 547.10.1021/cm0519075 ↗
13. Lu H., Zhao J., Li L., Zheng J., Zhang L., Gong L., Wang Z., Zhu Z., Chem. Phys. Lett., 508 (2011), 258.10.1016/j.cplett.2011.04.044 ↗
14. Morgan D.L., Triani G., Blackford M.G., Raftery N.A., Frost R.L., Waclawik E.R., J. Mater. Sri., 46 (2011), 548.10.1007/s10853-010-5016-0 ↗
15. Ylhäinen E.K., Nunes M.R., Silvestre A.J., Monteiro O.C., J. Mater Sci., 47 (2012), 4305.10.1007/s10853-012-6281-x ↗
16. Ma R., Bando Y, Sasaki T., Chem. Phys. Lett., 380 (2003), 577.10.1016/j.cplett.2003.09.069 ↗
17. Pradhan S.K., Mao Y., Wong S.S., Chupas P., PetkoV V., Chem. Mater., 19 (2007), 6180.10.1021/cm7019069 ↗
18. Gateshki M., Chen Q., Peng L.-M., Chupas P., Petkov V., Z. Kristallogr., 222 (2007), 612.10.1524/zkri.2007.222.11.612 ↗
19. Suzuki Y., Yoshikawa S., J. Mater. Res., 19 (2004), 982.10.1557/JMR.2004.0128 ↗
20. Ferreira O.P., Souza Filho A.G, Filho J.M., Alves O.L., J. Braz. Chem. Soc, 17 (2006), 393.10.1590/S0103-50532006000200025 ↗
21. Viana B.C., Ferreira O.P., Souza Filho A.G., Filho J.M., Alves O.L., J. Braz. Chem. Soc., 20 (2009), 167.10.1590/S0103-50532009000100025 ↗
22. Zhang W.F., He Y.L., Zhang M.S., Yin Z., Chen Q., J. Phys. D Appl. Phys., 33 (2000), 912.10.1088/0022-3727/33/8/305 ↗
23. Krishnamurti D., P. Indian AS-Sec. A, 55 (1962), 290.10.1007/BF03045870 ↗
24. Gao T., Fjellvĺg H., Norby P., Inorg. Chem., 48 (2009), 1423.10.1021/ic801508k ↗
25. Ma R., Fukuda K., Sasaki T., Osada M., Bando Y, J. Phys. Chem. B, 109 (2005), 6210.10.1021/jp044282r ↗
26. Riss A., Berger T., Stankic S., Bernardi J., Knözinger E., Diwald O., Angew. Chem. Int. Edit., 47 (2008), 1496.10.1002/anie.200703817 ↗
27. Gajović A., FriŠčič L, Plodinec M., Iveković D., J. Mol. Struct., 924 - 926 (2009), 183.10.1016/j.molstruc.2008.12.072 ↗
28. Qamar M., Yoon Cr., Oh Hj., Klm D.H., Jho J.H., Lee K.S., Lee W.J., Lee H.G., Kim S.J., Nan-otechnology, 17 (2006), 5922.10.1088/0957-4484/17/24/004 ↗
29. Gouadec G., Colomban P., Prog. Cryst. GrowthCh., 53(1) (2007), 1.10.1016/j.pcrysgrow.2007.01.001 ↗
30. Kolen’Ko Y.V., Kovnir K.A., Gavrilov A.I., Garshev A.V., Franiti J., Lebedev O.I., Churagulov B.R., Van Tendeloo G., Yoshimura M., J. Phys. Chem. B, 110 (2006), 4030.10.1021/jp055687u ↗
31. Papp S., Kõrösi L., Meynen V., Cool P., Vansant E.F., Dékány I., J. Solid State Chem., 178 (2005), 1614.10.1016/j.jssc.2005.03.001 ↗