journal article·2016-03-01Open access

Effects of thermal treatment and fluoride ion doping on surface and catalytic properties of NiO–ZrO2catalysts

Reham M. Abdel Fattah, Hala A. Kiwan, Awad I. Ahmed, Mohamed R. Mostafa

Materials Science-Poland· Volume 34· Issue 1

Abstract

Abstract ZrO2and a series of NiO/ZrO2hydrogels (5 to 25 wt.% NiO) were co-precipitated with the aid of NaOH–Na2C2O4solution. Two fluorinated hydrogels were also prepared by wet impregnation method. The samples were calcined in the temperature range of 550 to 850 °C. The surface properties of the samples were determined using DTA, XRD and nitrogen adsorption at −196 °C. The conversion of isopropanol was tested using microcatalytic pulse technique. DTA measurements showed that the addition of nickel oxide to zirconia influences the phase transition of ZrO2. XRD revealed that the tetragonal phase was formed at T ⩽ 650 °C, while a biphasic mixture was obtained at T ⩾ 750 °C. No spinel structure was detected by both DTA and XRD techniques and only traces of cubic NiO were detected for the samples containing ⩾ 15 wt.% nickel oxide and calcined at T ⩾ 750 °C. Significant changes in texture, surface acidity and catalytic activity were found as a result of the effects of thermal treatment and chemical composition. Incorporation of fluoride ions greatly increased the surface acidity and consequently enhanced the dehydration activity. It has been found that dehydration activity is related to the amount of surface acidity while the dehydrogenation of this alcohol is sensitive to NiO content.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Advancements in Solid Oxide Fuel Cells · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chemistry Department, Faculty of Science, Damietta University, Damietta, 34517, Egypt

Chemistry Department, Faculty of Science, Mansoura University, Mansoura, 35511, Egypt

References (46)

Show source-provided references
1. [1]Chen M.S., Goodman D.W., J. Phys. Condens. Matter., 20 (2008), 4013.10.1088/0953-8984/20/26/264013 ↗
2. [2]Shaikhtdmov S., Freund H.,Annu. Rev. Phys. Chem., 63 (2012), 619.10.1146/annurev-physchem-032511-143737 ↗
3. [3]Jacobson A., Chem. Mater., 22 (2010), 660.10.1021/cm902640j ↗
4. [4]Laguna-Bercero M.A.,J. Power Sources, 203 (2012), 4.10.1016/j.jpowsour.2011.12.019 ↗
5. [5]Akbar S., Dutta P., Lee C.H., Appl. Ceram. Technol., 3 (2006), 302.10.1111/j.1744-7402.2006.02084.x ↗
6. [6]Fergus J.W., Sensor. Actuat. B-Chem., 121 (2007), 652.10.1016/j.snb.2006.04.077 ↗
7. [7]Korotecenkov G., Dohan S., Stetter J.R.,Chem. Rev., 109 (2009), 1402.10.1021/cr800339k ↗
8. [8]Stemmer S., J. Vac. Sci. Technol. B, 22 (2004), 791.10.1116/1.1688357 ↗
9. [9]Chiang C.K., Wu C.H., Liu C.C., Lin J.F., Yang C.L., Wu J.W., Wang S.J., Jpn. J. Appl. Phys., (2012), 51.10.7567/JJAP.51.011101 ↗
10. [10]Zhang X., Shi H., Xu B.Q.,Catal. Today, 122 (2007), 330.10.1016/j.cattod.2007.02.016 ↗
11. [11]Comotti M., Li W.C., Spliethoff B., Schuth F., J. Am. Chem. Soc., 128 (3) (2006), 917.10.1021/ja0561441 ↗
12. [12]Idakiev V., Tabakova T., Naydenov A.Z., Yuan Y., Su B.L., Appl. Catal. B-Environ., 63 (2006), 178.10.1016/j.apcatb.2005.10.007 ↗
13. [13]Li J., Ta N., Song W., Zhan E.S., Shen W.J., Gold Bull., 42 (2009), 48.10.1007/BF03214905 ↗
14. [14]Zhang X., Shi H., Xu B.Q., Angew. Chem. Int. Edit., 44 (2005), 7132.10.1002/anie.200502101 ↗
15. [15]Nakano Y., Iizuka T., Hattori H., Tanabe T., J. Catal., 57 (1979 ), 1.
16. [16]Ferino I., Casula M.F., Corrias A., Cutrufello M.G., Monaci R., Paschina G., Phys. Chem. Chem. Phys., 2 (2000), 1847.10.1039/a908992f ↗
17. [17]Tanabe K., Yamaguchi T., Catal. Today, 20 (1994), 185.10.1016/0920-5861(94)80002-2 ↗
18. [18]Zhang F., Zheng Q., Wei K., Lin X., Zhang H., Li J., Cao Y.,Catal. Lett., 108 (2006), 131.10.1007/s10562-006-0047-5 ↗
19. [19]Munoz M. C., Gallego S., Beltran J.I., Cerda J., Surf. Sci. Rep., 61 (2006), 303.10.1016/j.surfrep.2006.03.002 ↗
20. [20]Benitez J.J., Alvero R., Carrizosa I., Odriozola J.A., Catal. Today, 9 (1991), 53.10.1016/0920-5861(91)85007-U ↗
21. [21]Comelli R.A., Vera C.R., Pavera J.M., J. Catal., 151 (1995), 96.10.1006/jcat.1995.1012 ↗
22. [22]Yadav G.D., Murkute A.D.,J. Catal., 24 (2004), 218.10.1016/j.jcat.2004.02.021 ↗
23. [23]Bolis V., Magnacca G., Cerrato G., Morterra C., Top. Catal., 19 (2002), 259.10.1023/A:1015332727610 ↗
24. [24]Zhang X., Liu J., Jing Y., Xie Y.,Appl. Catal. A-Gen., 240 (2003), 143.10.1016/S0926-860X(02)00426-X ↗
25. [25]Angelidis T.N., Papapetrou M., Stud. Surf. Sci. Catal., 133 (2001), 131.10.1016/S0167-2991(01)81955-8 ↗
26. [26]Chen X., Honda K., Zhang Z., Appl. Catal. A-Gen., 288 (2005), 86.10.1016/j.apcata.2005.04.037 ↗
27. [27]Cullity B.D., Elements Of X-Ray Diffraction, Addison-Wesley, California, 1978.
28. [28]Su C., Li J., He D., Cheng Z., Zhu Q., Appl. Catal. A-Gen., 202 (2000), 81.10.1016/S0926-860X(00)00461-0 ↗
29. [29]Rao K.N., Reddy K.M., Lingaish N., Suryanarayana I., Prasad P.S., Appl. Catal. A-Gen., 300 (2006), 139.10.1016/j.apcata.2005.10.051 ↗
30. [30]Li G., Li W., Zhang M., Tao K.,Catal. Today, 93 – 95 (2004), 595.10.1016/j.cattod.2004.07.001 ↗
31. [31]Ahmed A.I., El Hakam S.A., Samra S.E., Ekholy A.A., Khder A.S., Colloid. Surface A, 317 (2008), 62.10.1016/j.colsurfa.2007.09.043 ↗
32. [32]Sohn J.R., Park W.C., Appl. Catal. A-Gen., 230 (2002), 11.10.1016/S0926-860X(01)00952-8 ↗
33. [33]Farcasiu D., Li J.Q., Cameron S., Appl. Catal. Agen., 154 (1997), 173.10.1016/S0926-860X(96)00373-0 ↗
34. [34]Tani E., Yoshimura M., Somiya S., J. Am. Ceram. Soc., 66 (1983), 11.10.1111/j.1151-2916.1983.tb09958.x ↗
35. [35]Osendi M.I., Moya J., Serna C.J., Soria J., J. Am. Ceram. Soc., 68 (1985), 135.10.1111/j.1151-2916.1985.tb09651.x ↗
36. [36]Yamaguchi T., Tanabe T., Mater. Chem. Phys., 16 (1987), 67.10.1016/0254-0584(87)90039-3 ↗
37. [37]Srinivason R., Keog R A., Milburn D R., Davis B.H., J. Catal., 153 (1995), 123.10.1006/jcat.1995.1114 ↗
38. [38]Xu R.R., Bang W.Q., Chemistry Of Molecule Sieves And Mesoporous Materials, Science Press, Beijing, 2004, P. 173.
39. [39]De Boer J.H., The Structure And Preperties Of Porous Materials, Butterworth, London, 1958.
40. [40]Mokhtar M., Basahl S.N., Ali T.T., J. Mater. Sci., 48 (2013), 2705.10.1007/s10853-012-7068-9 ↗
41. [41]Pizzio L., Vazquez P.G., Caceres C.V., Blanco M.N.,Catal. Lett., 93 (2004) 67.10.1023/B:CATL.0000016951.83852.99 ↗
42. [42]Pizzio L., Blanco M.N., Appl. Catal. A-Gen., 255 (2003), 265.10.1016/S0926-860X(03)00565-9 ↗
43. [43]Mostafa M.R., Youssef A.M., Mater. Lett., 34 (1998), 405.10.1016/S0167-577X(97)00202-4 ↗
44. [44]Pepe F., Angeletti C., Rossi S.D., J. Catal., 118 (1989), 1.
45. [45]Mostafa M.R., Youssef A.M., Hassan S.M., Mater. Lett., 12 (1991), 207.10.1016/0167-577X(91)90176-7 ↗
46. [46]Mostafa M.R., Afinidad, 51 (1994), 445.10.1006/jmva.1994.1072 ↗