journal article·2016-06-01Open access

Experimental investigation on heat transfer rate of Co–Mn ferrofluids in external magnetic field

M. Margabandhu, S. Sendhilnathan, S. Senthilkumar, K. Hirthna

Materials Science-Poland· Volume 34· Issue 2

Abstract

Abstract Manganese substituted cobalt ferrite (Co1–xMnxFe2O4with x = 0, 0.3, 0.5, 0.7 and 1) nanopowders were synthesized by chemical coprecipitation method. The synthesized magnetic nanoparticles were investigated by various characterization techniques, such as X-ray diffraction (XRD), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM) and thermogravimetric and differential thermal analysis (TG/DTA). The XRD results confirmed the presence of cubic spinel structure of the prepared powders and the average crystallite size of magnetic particles ranging from 23 to 45 nm. The VSM results showed that the magnetic properties varied with an increase in substituted manganese while SEM analysis showed the change in the morphology of obtained magnetic nanoparticles. The TG/DTA analysis indicated the formation of crystalline structure of the synthesized samples. The heat transfer rate was measured in specially prepared magnetic nanofluids (nanoparticles dispersed in carrier fluid transformer oil) as a function of time and temperature in presence of external magnetic fields. The experimental analysis indicated enhanced heat transfer rate of the magnetic nanofluids which depended upon the strength of external magnetic field and chemical composition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Characterization and Applications of Magnetic Nanoparticles · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Anna University Chennai: University College of Engineering-Ariyalur, Department of Physics, Ariyalur-621704, India

Anna University Chennai: University College of Engineering-Pattukkottai, Department of Physics, Rajamadam-614701, Thanjavur, India

Anna University Chennai: University College of Engineering-Ariyalur, Department of EEE, Ariyalur-621704, India

Anna University Chennai: University College of Engineering-Kanchipuram, Department of Physics, Kanchipuram-631552, India

References (24)

Show source-provided references
1. Murty B.S., The Big World of Nanomaterials, in: Murty B.S., Shankar P., Raj B., Rath B.B., Murday J., Textbook of Nanoscience and Nanotechnology, Springer Berlin Heiderberg, India, 2013, p. 1.10.1007/978-3-642-28030-6 ↗
2. Sharifi I., Shokrollahi H., Amiri S., J. Magn. Magn. Mater., 6 (2012), 903.10.1016/j.jmmm.2011.10.017 ↗
3. Abareshi M., Goharshadi E.K., Zebarjad S.M., Fadafan H.K., Youssefi A., J. Magn. Magn. Mater., 24 (2010), 3895.10.1016/j.jmmm.2010.08.016 ↗
4. Wang X., Xu X., Choi S.U.S., J. Thermophys Heat Transfer., 4 (1999), 474.10.2514/2.6486 ↗
5. Philip J., Shima P.D., Raj B., Appl. Phys. Lett., 20 (2007), 203108-1.10.1063/1.2812699 ↗
6. Nkurikiyimfura I., Wang Y., Pan Z., Renew. Sust. Energy. Rev., 21 (2013), 548.10.1016/j.rser.2012.12.039 ↗
7. Hong T.K., Yang H.S., Choi C.J., J. Appl. Phys.,6 (2005), 064311-1.10.1063/1.1861145 ↗
8. Shima P.D., Philip J., J. Phys. Chem. C., 41 (2011), 20097.10.1021/jp204827q ↗
9. Philip J., Shima P.D., Raj B., Nanotechnology, 30 (2008), 305706.10.1088/0957-4484/19/30/305706 ↗
10. Vaidyanathan G., Sendhilnathan S., Arulmurugan R., J. Magn. Magn. Mater., 2 (2007), 293.10.1016/j.jmmm.2007.01.010 ↗
11. Vaidyanathan G., Sendhilnathan S., J. Magn. Magn. Mater., 6 (2008), 803.10.1016/j.jmmm.2007.08.021 ↗
12. Jenkins R., Snyder R.L., Introduction to X-ray Powder Diffractometry, John Wiley & Sons Inc, New York, 1996.10.1002/9781118520994 ↗
13. Atif M., Turtelli R.S., Grossinger R., Siddique M., Nadeem M., Ceram. Int., 1 (2014), 471.
14. Pereira C., Pereira A.M., Fernandes C., Rocha M., Mendes R., Garcíia M.P.F., Guedes A., Tavares P.B., Greneche J.M., Araujo J.P., Freire C., Chem. Mater., 8 (2012), 1496.10.1021/cm300301c ↗
15. Yadav S.P., Shinde S.S., Bhatt P., Meena S.S., Rajpure K.Y., J. Alloy. Compd., 646 (2015), 550.10.1016/j.jallcom.2015.05.270 ↗
16. Saafan S.A., Assar S.T., Mansour S.F., J. Alloy. Compd., 542 (2012), 192.10.1016/j.jallcom.2012.07.050 ↗
17. Sanpo N., Berndt C.C., Wen C., Wang J., Acta Biomater., 3 (2013), 5830.10.1016/j.actbio.2012.10.037 ↗
18. Hashim M., Alimuddin, Shirsath S.E., Kumar S., Kumar R., Roy A.S., Shah J., Kotnala R.K., J. Alloy. Compd., 549 (2013), 348.10.1016/j.jallcom.2012.08.039 ↗
19. Philip J., Shima P.D., Raj B., Appl. Phys. Lett.,4 (2008), 043108-1.10.1063/1.2838304 ↗
20. Bishop K.J.M., Wilmer C.E., Soh S., Grzybowski B.A., Small, 14 (2009), 1600.10.1002/smll.200900358 ↗
21. Nkurikiyimfura I., Wang Y., Pan Z., Exp. Therm. Fluid Sci., 44 (2013), 607.10.1016/j.expthermflusci.2012.08.024 ↗
22. Li J., Huang Y., Liu X., Lin Y., Bai L., Li Q., Sci. Technol. Adv. Mat., 6 (2007), 448.10.1016/j.stam.2007.04.007 ↗
23. Lian W., Xuan Y., Li Q., Energ. Convers. Manage., 1 (2009), 35.10.1016/j.enconman.2008.09.005 ↗
24. Luminosu I., Sabata C.D., Sabata A.D., Jurca T., AGIR Sci. Bull., 2 – 3 (2009), 66.