journal article·2020-12-01Open access

Synthesis, electrical and magnetic properties of polymer coated magnetic nanoparticles for application in MEMS/NEMS

Muhammad Arshad Javid, Muhammad Sajjad, Saeed Ahmad, Muhammad Azhar Shahid Khan, Khalid Nadeem, Niama Amin, Zahid Mehmood

Materials Science-Poland· Volume 38· Issue 4

Abstract

Abstract In this research work, polymer coated magnetic nanoparticles were prepared by co-precipitation method. The samples were characterized by XRD, SEM, EDS, VSM and two probe DC conductivity measurements. XRD pattern indicated the existence of a sole cubic phase of Fe 3 O 4 with Miller indices (2 2 0), (3 1 1), (5 1 1), (4 4 0). An average size of magnetic nanoparticles was about 22.9 nm and it was reduced to 21.3 nm and 19.4 nm after 1 wt. %. and 2 wt. % coating of PEG-6000, respectively. The morphology and size of the samples were investigated by scanning electron microscope (SEM). EDX spectra confirmed the coating of PEG on magnetic nanoparticles. Magnetic properties were examined by vibrating sample magnetometer (VSM). Saturation magnetization (M s ) decreased as the concentration of PEG increased in the magnetic material. Electrical properties of uncoated and polymer coated Fe 3 O 4 nanoparticles were studied by two-probe conductivity meter. This study concluded that the thermal flow of charge in polymer coated magnetic nanoparticles can be evaluated at micro and nano level.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Characterization and Applications of Magnetic Nanoparticles · Advanced Sensor and Energy Harvesting Materials · Magnetic Properties and Synthesis of Ferrites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Basic Sciences (Physics) , University of Engineering and Technology , Taxila , 47050 , Pakistan

Department of Physics , The Islamia University of Bahawalpur , 63100 , Pakistan

Department of Physics , University of Gujrat , Gujrat , 50700 , Pakistan

Department of Physics, CIIT, COMSAT , Lahore , 54750 , Pakistan

Department of Software Engineering , University of Engineering and Technology , Taxila , 47050 , Pakistan

References (38)

Show source-provided references
1. [1] Oliveira D., Barud S., Salvi D., Perotti G., Riberio S., Indian Crop. Prod., 69, (2015), 415.10.1016/j.indcrop.2015.02.01510.1016/j.indcrop.2015.02.015 ↗
2. [2] Xu H., Cheng L., Wang C., Ma X., Li Y., Liu Z., Biomaterials, 32: (2011), 9364.10.1016/j.biomaterials.2011.08.0532188036410.1016/j.biomaterials.2011.08.053 ↗
3. [3] Chai C.C., Lee Z.H., Toh P.Y., Chieh C.J, Ahmad A.L., Lim J.K., Chem. Eng. J., 281, (2015), 523.10.1016/j.cej.2015.06.10810.1016/j.cej.2015.06.108 ↗
4. [4] Hauser A.K., Wydra R.J., Stocke A., Anderson W., Hilt Z., J. Cont. Rel., 219, (2015), 76.10.1016/j.jconrel.2015.09.03946690632640767010.1016/j.jconrel.2015.09.039 ↗
5. [5] Leng J., Li J., Ren J., Deng L., Lin C., Mater. Lett., 152, (2015), 185.10.1016/j.matlet.2015.03.12010.1016/j.matlet.2015.03.120 ↗
6. [6] Heid A., Bahrololoom M., Vashaee D., Tayebi I., Ceramic. International., 41, (2015), 3094.10.1016/j.ceramint.2014.10.15310.1016/j.ceramint.2014.10.153 ↗
7. [7] Omidi H.M., Mahboobeh A., Farideh P., Materials Science-Poland 35, (2017), 105-110.10.1515/msp-2017-001110.1515/msp-2017-0011 ↗
8. [8] Sun X., Keating A., Parish G., Micropor. Mesopor. Mat., 218, (2015), 88.10.1016/j.micromeso.2015.07.01010.1016/j.micromeso.2015.07.010 ↗
9. [9] Thangawng A.L., Rodney S.R., Melody A.S., Biomedical Microdevices 9, (2007), 587-595.10.1007/s10544-007-9070-61751617210.1007/s10544-007-9070-6 ↗
10. [10] Javid MA., Sadaqat N., Rafique M., Materials Today: Proceedings. (2020).
11. [11] Javid Ma., U.Zafar, H.Fayyaz, M.Imran., Int. J. Mod. Phys. B, 32 (14), (2018), 13.
12. [12] Javid MA., Fayyaz H., Imran M., Mater. Sci.- Poland, 34, (2016), 741.10.1515/msp-2016-010910.1515/msp-2016-0109 ↗
13. [13] Azeem N., Ma. Javid, Tahir I., J. Semicond, 38. (2017), 7.
14. [14] Sabater AB., Jeff R., J. Micromech. Microeng., 24, (2014), 065005.10.1088/0960-1317/24/6/06500510.1088/0960-1317/24/6/065005 ↗
15. [15] Narbutovskih M., Field L., Clifford G., Beck P., Sensor. Actuat. A-Phys., 70, (1998), 128.10.1016/S0924-4247(98)00123-X10.1016/S0924-4247(98)00123-X ↗
16. [16] Kim S., Roy S., Adv. Chronic. Kidney D, 20, (2013), 516.10.1053/j.ackd.2013.08.00638660202420660410.1053/j.ackd.2013.08.006 ↗
17. [17] Attallah A., Girgis E., J. Magn. Magn. Mater., 399, (2016), 58.10.1016/j.jmmm.2015.09.05910.1016/j.jmmm.2015.09.059 ↗
18. [18] Manrique J., Machuca F., Marriga F., J. Magn. Magn. Mater., 401, (2016), 81.10.1016/j.jmmm.2015.10.01810.1016/j.jmmm.2015.10.018 ↗
19. [19] Li X., Liu G., Yan W., Chu P.K., Wu S., Yi C., Xu Z., J. Magn. Magn. Mater., 324, (2012), 1410.10.1016/j.jmmm.2011.11.05610.1016/j.jmmm.2011.11.056 ↗
20. [20] Cantalapiedra A., Gismera M.J., Procopio JR., Sevilla M.T., Talanta, 139, (2015), 111.10.1016/j.talanta.2015.02.0492588241510.1016/j.talanta.2015.02.049 ↗
21. [21] Cornell R.M., Schwertmann U., The iron oxides. VCH Press, Weinheim, Germany, (1996).
22. [22] Arshad J., Saddique A., Zahid M., Mater. Sci- Poland, 25 (2019), 359.10.5755/j01.ms.25.4.2114910.5755/j01.ms.25.4.21149 ↗
23. [23] Javid M.A., Materials Today: Proceedings (2020).
24. [24] Harsha N., Swathi K., Neeroli K.R., Satyajit S., RSC Adv., 38, (2015), 30354.10.1039/C5RA03722K10.1039/C5RA03722K ↗
25. [25] Takenaka K., Ozawa A., Shibayama T., Urano C., Appl. Phys. Letters; 9 (2011), 022103.10.1063/1.3541449
26. [26] Katikaneani P., Ajay K V., Narender RT., Ramu B., Srivani K., J. Nanosci., (2016).
27. [27] Shanmuga SI., Mayank S., Shampa S., Transl. Biomed., 6,3: (2015).
28. [28] Franco A., Thiago AL., Emília LI., Eloisa N., Appl. Phys. A, 94 (1) (2009), 131.
29. [29] Markhulia J., Mikelashvili V., Kekutia L., J. Pharm. Appl. Chem., 2, (2016), 33.10.18576/jpac/02020110.18576/jpac/020201 ↗
30. [30] Khalkhali M., Rostamizadeh K., Sadighian S., J. Pharm. Sci., 23 (2015), 45.10.1186/s40199-015-0124-710.1186/s40199-015-0124-7 ↗
31. [31] Mahdavi M., Ahmad B., Haron J., Rahman A., J., Molecules, 18 (2013), 7533.10.3390/molecules1807753310.3390/molecules18077533 ↗
32. [32] Anbarasu M., Anandan E., Chinnasamy V., Gopinath K., Spectrochim. Acta A, 135 (2015), 536.10.1016/j.saa.2014.07.05910.1016/j.saa.2014.07.059 ↗
33. [33] Yunas J., Polymers, 5 (2020), 1184.10.3390/polym1205118410.3390/polym12051184 ↗
34. [34] Vella L., Emerson D., ASEG Extended Abstracts, 1 (2012), 1.10.1071/ASEG2012ab23210.1071/ASEG2012ab232 ↗
35. [35] Schwertmann U., Rochelle MC., Iron oxides in the laboratory: preparation and characterization. John Wiley & Sons, 2008.
36. [36] Eslamian M., Morteza M., Ziad S., Fluid Dynamics and Material Processing, 2012.
37. [37] Weidenfeller E., Höfer M., Frank S., Composites Part A: Appl. Sci. Manuf, 33, (2002), 1041.10.1016/S1359-835X(02)00085-410.1016/S1359-835X(02)00085-4 ↗
38. [38] Cimalla V., Joerg P., Oliver A., J. Physics D: Appl. Phys, 40, 20 (2007), 6386.10.1088/0022-3727/40/20/S1910.1088/0022-3727/40/20/S19 ↗