journal article·2017-10-20Open access

Multifractal characterization of epitaxial silicon carbide on silicon

Ştefan Ţălu, Sebastian Stach, Shikhgasan Ramazanov, Dinara Sobola, Guseyn Ramazanov

Materials Science-Poland· Volume 35· Issue 3

Abstract

Abstract The purpose of this study was to investigate the topography of silicon carbide films at two steps of growth. The topography was measured by atomic force microscopy. The data were processed for extraction of information about surface condition and changes in topography during the films growth. Multifractal geometry was used to characterize three-dimensional micro- and nano-size features of the surface. X-ray measurements and Raman spectroscopy were performed for analysis of the films composition. Two steps of morphology evolution during the growth were analyzed by multifractal analysis. The results contribute to the fabrication of silicon carbide large area substrates for micro- and nanoelectronic applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Roughness and Optical Measurements · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj, Romania

University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, ul. B˛edzi´nska 39, 41-205 Sosnowiec , Poland

SICLAB Limited liability company, 367030 Makhachkala, M. Yaragskogo 75, Dagestan Republic, Russian Federation

Dagestan State University, Faculty of Physics, 367015 Makhachkala , M. Gadjieva 43-a, Dagestan Republic, Russian Federation

Brno University of Technology, Faculty of Electrical Engineering and Communication, Physics Department, Technická 8, 616 00 Brno , Czech Republic

References (23)

Show source-provided references
1. [1] LI B., KANG P., GOU H„ WU G., MULA S., Corros. Sci., 88 (2014), 473.10.1016/j.corsci.2014.08.008 ↗
2. [2] ZHOU Y., PAN G., SHI X., XU L., ZOU CH., GONG H., LUO G., Appl. Sur. Sci., 316 (2014), 643.10.1016/j.apsusc.2014.08.011 ↗
3. [3] LIU X., HAN Y., EVANS J.W., ENGSTFELD A.K., JUERGEN BEHM R., TRINGIDES M.C., HUPALO M., LIN H., HUANG L., HO K., APPY D., THIEL P.A., WANG C., Prog. Sur. Sci., 90 (2015), 397.10.1016/j.progsurf.2015.07.001 ↗
4. [4] LIANBI L., ZHIMING CH., LONGFEI X., CHEN Y., Mater. Lett., 93 (2013), 330.
5. [5] LONG-FEI X., ZHI-MINGA CH., LIAN-BIAB L., CHENA Y., XIAO-MIN H., NA Y., Appl. Sur. Sci., 261 (2012), 88.
6. [6] ANZALONE R., ALBERTI A., LAVIA F., Mater. Lett., 118 (2014), 130.10.1016/j.matlet.2013.12.067
7. [7] CHAIKEN J., GOODISMA J., Photochem. Photobiol. A, 80 (1994), 53.10.1016/1010-6030(94)01048-X10.1016/1010-6030(94)01048-X ↗
8. [8] VASILEV B., BOTT S., RZEHAK R., LISKE R., BARTHA J.W., 104 (2013), 48.10.1016/j.mee.2012.10.007 ↗
9. [9] DALLAEVA D., ŢĂ LU Ş., STACH S., ŠKARVADA P., TOMÁNEK P., GRMELA L., Appl. Sur. Sci., 312 (2014), 81.10.1016/j.apsusc.2014.05.086 ↗
10. [10] ŢĂ LU Ş., STACH S., MAHAJAN A., PATHAK D., WAGNER T., KUMAR A., BEDI R.K., ŢĂ LU M., Electron. Mater. Lett., 10 (2014), 719.10.1007/s13391-013-3270-4 ↗
11. [11] ŢĂ LU Ş., GHAZAI A.J., STACH S., HASSAN A., HASSAN Z., ŢĂ LU M., J. Mater. Sci. Mater. El., 25 (2014), 466.
12. [12] ŢĂ LU Ş., STACH S., VALEDBAGI S., ELAHI S.M., BAVADI R., Mater. Sci.-Poland, 33 (2015), 137.10.1515/msp-2015-0010 ↗
13. [13] ŢĂ LU Ş., BRAMOWICZ M., KULESZA S., SOLAYMANI S., GHADERI A., DEJAM L., ELAHI S.M., BOOCHANI A., Superlattice. Microst., 93 (2016), 109.10.1016/j.spmi.2016.03.003 ↗
14. [14] ŢĂ LU Ş., Micro and nanoscale characterization of three dimensional surfaces. Basics and applications, Napoca Star Publishing House, Cluj-Napoca, Romania, 2015.
15. 15] ŢĂ LU Ş., SOLAYMANI S., BRAMOWICZ M., NASERI N., KULESZA S., GHADERI A., RSC Adv., 6 (2016), 27228.10.1039/C6RA01791F ↗
16. [16] ŢĂ LU Ş., BRAMOWICZ M., KULESZA S., GHADERI A., DALOUJI V., SOLAYMANI S., FATHI KENARI M., GHORANNEVISS M., J. Microsc., 264 (2016), 143.10.1111/jmi.12422 ↗
17. [17] ŢĂ LU Ş., BRAMOWICZ M., KULESZA S., DALOUJI V., SOLAYMANI S., VALEDBAGI S., Microsc. Res. Tech., 79 (2016), 1208.10.1002/jemt.22779 ↗
18. [18] ŢĂ LU Ş., BRAMOWICZ M., KULESZA S., GHADERI A., SOLAYMANI S., SAVALONI H., BABAEI R., J. Ind. Eng. Chem., 43 (2016), 164.10.1016/j.jiec.2016.08.003 ↗
19. [19] RAMAZANOV S., ŢĂ LU Ş., SOBOLA D., STACH, S., RAMAZANOV G., Superlattice. Microstruct., 86 (2015), 395.
20. [20] RAMAZANOV SH. M., RAMAZANOV G. M., Tech. Phys. Lett., 40 (2014), 44.10.1134/S106378501401009X ↗
21. [21] WUCHERPFENNIG TH., LAKOWITZ A., KRULL R., J. Biotechnol., 163 (2013), 124.10.1016/j.jbiotec.2012.08.027 ↗
22. [22] ISO 25178-2: 2012, Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters. Available from: http://www.iso.org (accessed on March 10, 2017).
23. [23] KLADKO V.P., KUCHUK A.V., SAFRYUK N.V., MACHULIN V.F., BELYAEV A.E., HARDTDEGEN H., VITUSEVICH S.A., Appl. Phys. Lett., 95 (2009), 031907.10.1063/1.3184569 ↗