journal article·2016-06-01Open access

Optimization of S:Sn precursor molar concentration on the physical properties of spray deposited single phase Sn2S3thin films

J. Srivind, V.S. Nagarethinam, A.R. Balu

Materials Science-Poland· Volume 34· Issue 2

Abstract

Abstract Nanoneedle structured Sn2S3thin films were prepared by spray pyrolysis technique from aqueous solutions of tin (II) chloride and thiourea, keeping the molar concentrations of S:Sn = 0.01:0.01, 0.02:0.02, 0.03:0.03 and 0.04:0.04 in the starting solutions. XRD studies reveal that all the films exhibit orthorhombic crystal structure with a preferential orientation along the [2 1 1] direction. The peak intensity of the (2 1 1) plane is found to be maximum for the film coated with 0.02:0.02 S:Sn molar concentration which confirms the improved crystalline nature of this film. SEM images depict that the film coated with S:Sn molar concentration 0.02:0.02 exhibit needle shaped grains. The optical band gap exhibits red shift from 2.12 eV to 2.02 eV with an increase in S:Sn precursor molar concentration. Electrical studies show that the films having S:Sn molar concentrations 0.01:0.01 and 0.02:0.02 exhibit minimum resistivity values of 0.238 and 0.359Ω ·cm, respectively. © Wroclaw University of Technology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PG and Research Department of Physics, AVVM Sri Pushpam College, Poondi-613 503, Tamilnadu, India

References (28)

Show source-provided references
1. Jiang T., Ozin G.A., J. Mater. Chem., 8 (1998), 1099.10.1039/a709054d ↗
2. Radot M.B., Day P., Adv. Inorg. Chem. Radiochem., 10 (1967), 247.
3. Khadraoui M., Benramdane N., Mathieu C., Bouzidi A., Miloua R., Kebbab Z., Solid State Commun., 150 (2009), 297.10.1016/j.ssc.2009.10.032 ↗
4. Lofersky J.J., Appl. Phys., 27 (1956), 77.10.1080/00221473.1956.10628306 ↗
5. Khelia C., Boubakar K., Ben Nasrallah T., Amlouk M., Belgaum S., Saadallah F., Yocoubi N., J. Crys. Growth, 311 (2009), 1032.10.1016/j.jcrysgro.2008.10.005 ↗
6. Yue G.H., Wang W., Wang L.S., Wang X., Yan P.X., Chen Y., Peng D.L., J. Alloy. Compd., 474 (2010), 445.10.1016/j.jallcom.2008.06.105 ↗
7. Khomane A.S., J. Alloy. Compd., 506 (2010), 849.10.1016/j.jallcom.2010.07.092 ↗
8. Chate P.A., Hankare P.P., Sathe D.J., J. Alloy. Compd., 505 (2010), 140.10.1016/j.jallcom.2010.06.015 ↗
9. Sehlat R., Armstrong N.R., Parkinson B.A., Pettenkofer C., Jaegermann W., Surf. Sci., 385 (1997), 1.
10. Ghosh B., Das M., Banerjee P., Das S., Appl. Surf. Sci., 254 (2008), 6436.10.1016/j.apsusc.2008.04.008 ↗
11. Salah H., Bouzouita H., Rezig B., Thin Solid Films, 480 – 481 (2005), 439.10.1016/j.tsf.2004.11.035 ↗
12. Lopez S., Granades S., Ortiz A., Semicond. Sci. Technol., 11 (1996), 433.10.1088/0268-1242/11/3/025 ↗
13. Manjula N., Usharani K., Abalu R., Nagarethinam V.S., Int. J. Chem. Tech. Res., 6 (2014), 705.
14. Usharani K., Balu A.R., Acta Metall. Sin., 28 (2015) 64.
15. Narasimman V., Nagarethinam V.S., Balu A.R., Suganya M., Anbarasi M., Usharani K., Int. J. Appl. Res. Eng. Sci., 1 (2014), 7.
16. Al-Douri Y., Khasawneh Q., Kiwan S., Hashim U., Abd Hamid S.B., Reshak A.H., Bouhemadou A., Ameri M., Khenata R., Energ. Convers. Mange., 82 (2014), 238.10.1016/j.enconman.2014.03.020 ↗
17. Rajashree C., Balu A.R., Nagarethinam V.S., Surf. Eng., 31 (2015), 316.10.1179/1743294415Y.0000000014 ↗
18. Syed Basheer Ahamed M.G., Nagarethinam V.S., Balu A.R., Thayumanavan A., Murali K.R., Sanjeeviraja C., Jayachndran M., Cryst. Res. Technol., 45 (2010), 421.10.1002/crat.200900614 ↗
19. Chu J., Jin Z., Wang W., Liu H., Wang D., Yang J., Hong Z., J. Alloy. Compd., 517 (2012), 54.10.1016/j.jallcom.2011.11.141 ↗
20. Syed Basheer Ahamed M.G., Balu A.R., Nagarethinam V.S., Thayumanavan A., Murali K.R., Sanjeeviraja C., Jayachndran M., Cryst. Res. Technol., 45 (2010), 387.10.1002/crat.201000005 ↗
21. Anbarasi M., Sivaraman T., Nagarethinam V.S., Balu A.R., Int. J. Chem. Phys. Sci., 3 (2014), 1.10.12785/ijtfst/030304 ↗
22. Chalana S.R., Vinodkumar R., Navas I., Ganesan V., Mahadevan Pillai V.P., J. Lumin., 132 (2012), 944.10.1016/j.jlumin.2011.10.017 ↗
23. Sivaraman T., Balu A.R., Nagarethinam V.S., Mat. Sci. Semicond. Proc., 27 (2014), 915.10.1016/j.mssp.2014.08.024 ↗
24. Chaura S., Chaura N.B., Pandey R.K., Physica E, 28 (2005), 439.10.1016/j.physe.2005.05.044 ↗
25. Ye C.H., Fang X.S., Li G.H., Zhang L.D., Appl. Phys. Lett., 85 (2004), 3035.10.1063/1.1807018 ↗
26. Ehrlich W., Gumlich H.E., Tschierse D., J. Crys. Growth, 72 (1985), 37.
27. Vigil O., Riech I., Garcia-Rocha M., Zelayaangel O., J. Vac. Sci. Technol. A, 15 (1997), 2282.10.1116/1.580735 ↗
28. Mochizuki K., Satoh M., Igaki K., Jpn. J. Appl. Phys., 22 (1983), 1414.10.1143/JJAP.22.1414 ↗