journal article·2020-03-01Open access

Impact of firing temperature on insulating properties of Low Temperature Co-fired Ceramics

Arkadiusz P. Dabrowski

Materials Science-Poland· Volume 38· Issue 1

Abstract

Abstract In this paper, results of investigation on the impact of firing temperature on insulating properties of Low Temperature Cofired Ceramics are presented. Dissipation factor, volume resistivity and breakdown electric field intensity were determined for firing peak temperature in the range from 800 °C to 900 °C. The tests were performed for two commercial LTCC materials: 951 Green Tape (DuPont, USA) and SK47 (Keko, Slovenia). The results showed that the firing temperature had a significant effect on the dielectric loss factor, volume resistivity and lifetime at applied high voltage. No clear tendency was observed for dielectric strength in the analyzed firing temperature range.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Wroclaw University of Science and Technology , Faculty of Microsystem Electronics and Photonics , Wybrzeze Wyspianskiego 27, 50-370 Wroclaw , Poland

References (24)

Show source-provided references
1. [1] Dziedzic A., Nowak D., Radioengineering, 22 (2013), 218.
2. [2] Ur-Rehman M., Adekanye M., Tariq Chattha H., Nano Commun. Netw., 18 (2018), 72.10.1016/j.nancom.2018.03.00310.1016/j.nancom.2018.03.003 ↗
3. [3] Jantunen H., Kangasvieri T., Vähäkangas J., Leppävuori S., J. Eur. Ceram. Soc., 23[14] (2003), 2541.10.1016/S0955-2219(03)00155-910.1016/S0955-2219(03)00155-9 ↗
4. [4] Nowak D., Dziedzic A., Microelectron. Reliab., 51[7] (2011), 1241.10.1016/j.microrel.2011.02.01810.1016/j.microrel.2011.02.018 ↗
5. [5] Jiang B., Muralt P., Maeder T., Sensor. Actuat. BChem., 221 (2015), 823.10.1016/j.snb.2015.06.12710.1016/j.snb.2015.06.127 ↗
6. [6] Belavic D., Hrovat M., Dolanc G., Santo Zarnik M., Holc J., Makarovic K., Radioengineering, 21[1] (2012), 195.10.4071/CICMT-2012-WA1410.4071/CICMT-2012-WA14 ↗
7. [7] Ma M., Khan H., Shan W., Wang Y., Ou J. Z., Liu Z., Kalantar-Zadeh K., Li Y., Sensor. Actuat. B-Chem., 239 (2017), 711.10.1016/j.snb.2016.08.07310.1016/j.snb.2016.08.073 ↗
8. [8] Lin L., Ma M., Zhang F., Liu F., Liu Z., Li Y., Ceram. Int., 44[1] (2018), S129.10.1016/j.ceramint.2018.08.15910.1016/j.ceramint.2018.08.159 ↗
9. [9] Manjakkal L., Synkiewicz B., Zaraska K., Cvejin K., Kulawik J., Szwagierczak D., Sensor. Actuat. B-Chem., 223 (2016), 641.10.1016/j.snb.2015.09.13510.1016/j.snb.2015.09.135 ↗
10. [10] Radauscher E.J., Parker C.B., Gilchrist K.H., Di Dona S., Russell Z.E., Hall S.D., Carlson J.B., Grego S., Edwards S.J., Sperline R.P., Denton M., Stoner B.R., Glass J.T., Amsden J.J., Int. J.Mass Spectrom., 422 (2017), 162.10.1016/j.ijms.2016.10.02110.1016/j.ijms.2016.10.021 ↗
11. [11] Dorczynski M., Fabinska W., Roguszczak H., Golonka L., Proc. Device Packaging HiTEC HiTEN & CICMT, (2016), p. 47.10.4071/2016CICMT-TP2A3 ↗
12. [12] Da˛browski A., Rydygier P., Czok M., Golonka L., Microelectron. Int., 35 (2018), 146.10.1108/MI-12-2017-007010.1108/MI-12-2017-0070 ↗
13. [13] Imanaka Y., Multilayered Low Temperature Cofired Ceramics (LTCC) Technology, Springer US, 2005.
14. [14] Makarovic K., Meden A., Hrovat M., Holc J., Bencan A. Dakskobler A., Kosec M., J. Am. Ceram. Soc., 95[2], (2012), 760.10.1111/j.1551-2916.2011.05027.x10.1111/j.1551-2916.2011.05027.x ↗
15. [15] Alias R., The Effects of Sintering Temperature Variations on Microstructure Changes of LTCC Substrate, in: Lakshmanan A. (Ed.), Sintering of ceramics – new emerging techniques, InTech, London, 2012, p. 59.10.5772/3287310.5772/32873 ↗
16. [16] Walker J. Maloney J., Gleason C., Holthus J., Smith B., Henry J., Graddy E., Sridharan S., Sakoske G., Proc. Device Packaging HiTEC HiTEN & CICMT, (2016), p. 136.10.4071/2016CICMT-WP12 ↗
17. [17] Heux A., Antou G., Pradeilles N., Delhote N., Karnfelt C., Gallee F., Maitre A., Ceram. Int., 44[18] (2018), 22609.10.1016/j.ceramint.2018.09.03510.1016/j.ceramint.2018.09.035 ↗
18. [18] Makarovic K., Bencan A., Hrovat M., Holc J., Mali B, Kosec M., Bermejo R., Kraleva I., Int. J. Appl. Ceram. Technol., 10 [3] (2013), p. 449.10.1111/ijac.12030 ↗
19. [19] Barteczka B., Slobodzian P., Dabrowski A., Golonka L., Microelectron. Int., 31[3] (2014), 169.10.1108/MI-11-2013-006710.1108/MI-11-2013-0067 ↗
20. [20] Nair D., Nair K. M., Souders K., Smith M., McCombs M., Parisi J., Mobley T., Thrasher B., (2010), Proc. International Symposium on Microelectronics: FALL 2010, Vol. 2010, No. 1, p. 242.10.4071/isom-2010-TP3-Paper1 ↗
21. [21] Kawaguchi S., Namiki K.C., Ohshio S., Nishino J., Saitoha H., Adv. Mater., 11-12 (2006), p.693.10.4028/www.scientific.net/AMR.11-12.693 ↗
22. [22] Tsu R., McPherson J.W., McKee W.R., Proc. IRPS, (2000), p. 348.
23. [23] Noguchi J., IEEE Electron Dev., 52[8] (2005), p. 1743.10.1109/TED.2005.851849 ↗
24. [24] Watson J., Castro G., J. Mater. Sci. Mater. Electron., 26 (2015), p. 9226.10.1007/s10854-015-3459-4 ↗