journal article·2017-02-24Open access

Effect of sintering parameters using the central composite design method, electronic structure and physical properties of yttria-partially stabilized ZrO2 commercial ceramics

A.M. Mendes, M.C.B. Costa, V.D. Araújo, F.V. Motta, C.A. Paskocimas, W. Acchar, E. Longo, M.R.D. Bomio, L.S. Cavalcante

Materials Science-Poland· Volume 35· Issue 1

Abstract

Abstract In this work, the effect of sintering parameters on electronic structure and physical properties of yttria-partially stabilized ZrO2 (YPSZ) commercial ceramics has been studied using the central composite design (CCD) method. The CCD method allows using empirical modelling with better fitting, by considering the interaction between both factors. Different temperature ranges and sintering times for processing of YPSZ ceramics have been used in order to evaluate the grain growth, hardness and volumetric shrinkage by the CCD method. X-ray diffraction patterns and Rietveld refinement data indicate that non-sintered YPSZ ceramics exhibits two phases related to tetragonal and monoclinic structures, while the sintered YPSZ ceramics exhibits a single phase related to a tetragonal structure. Moreover, the monoclinic structure presents zirconium (Zr) atoms coordinated to seven oxygen (O) atoms, while in the tetragonal structure Zr atoms are coordinated to eight O atoms. Field emission scanning electron microscopy images were employed to monitor the sintering and growth process. In addition, the response surfaces obtained from calculations presented the effect of thermal and kinetic variables on the physical properties such as average grain size, volumetric shrinkage and hardness of YPSZ ceramics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advancements in Solid Oxide Fuel Cells · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

LSQM-Laboratório de Síntese Química de Materiais-DEMat , Universidade Federal do Rio Grande do Norte-UFRN , P.O. Box 1524, 59078-970 , Natal , RN , Brazil

Departamento de Física , Universidade Federal do Rio Grande do Norte-UFRN , P.O. Box 1524, 59078-970 , Natal , RN , Brazil

LIEC , Departamento de Química-Universidade Federal de Săo Carlos-UFSCar , P.O. Box 676, 13565-905 , Săo Carlos , SP , Brazil

PPGQ-DQ-CCN-GERATEC-Universidade Estadual do Piauí , Joăo Cabral, N. 2231, P.O. Box 381, 64002-150 Teresina , PI , Brazil

References (77)

Show source-provided references
1. Ali S.A., Karthigeyan S., Deivanai M., Ma R., J. Prosthodont., 34 (2014), 178.
2. Denry I., Kelly J.R., Dent. Mater., 24 (2008), 299.10.1016/j.dental.2007.05.007 ↗
3. Birkby I., Harrison P., Stevens R., J. Eur. Ceram. Soc., 5 (1989), 37.10.1016/0955-2219(89)90007-1 ↗
4. Yang C.C.T., Wei W.C.J., Wear, 242 (2000), 97.10.1016/S0043-1648(00)00409-9 ↗
5. Kohorst P., Borchers L., Strempel J., Stiesch M., Hassel T., Bach F.W., Hubsch C., Acta Biomater, 8 (2012), 1213.10.1016/j.actbio.2011.11.016 ↗
6. Christel P., Meunier A., Heller M., Torre J.P., Peille C.N., J. Biomed. Mater. Res. A, 23 (1989), 45.10.1002/jbm.820230105 ↗
7. Kuwabara M., Ashizuka M., Kubota Y., Tsukidate T., J. Mater. Sci. Lett., 5 (1986), 7.10.1007/BF01671417 ↗
8. Aboushelib M.N., Kleverlaan C.J., Feilzer A.J., J. Prosthodont., 17 (2008), 538.10.1111/j.1532-849X.2008.00346.x ↗
9. Uoa M., Sjoren G., Sundh A., Watari F., Bergman M., Lerner U., Dent. Mater., 19 (2003), 487.10.1016/S0109-5641(02)00094-5 ↗
10. Özkol E., Zhang W., Ebert J., Telle R., J. Eur. Ceram. Soc., 32 (2012), 2193.10.1016/j.jeurceramsoc.2012.03.006 ↗
11. Muńoz-Tabares J.A., Jiménez-Piqué E., Reyes-Gasga J., Anglada M., J. Eur. Ceram. Soc., 32 (2012), 3919.10.1016/j.jeurceramsoc.2012.02.026 ↗
12. Mazaheri M., Simchi A., Golestani-Fard F., J. Eur. Ceram. Soc., 28 (2008), 2933.10.1016/j.jeurceramsoc.2008.04.030 ↗
13. Vleugels J., Yuan Z.X., Der Biest O.V., J. Eur. Ceram. Soc., 22 (2002), 873.10.1016/S0955-2219(01)00389-2 ↗
14. Nogiwa-Valdez A.A., Rainforth W.M., Zeng P., Ross I.M., Acta Biomater., 9 (2013), 6226.10.1016/j.actbio.2012.11.027 ↗
15. Ran S., Vleugels J., Huang S., Vanmeensel K., Blank D.H.A., Winnubst L., J. Eur. Ceram. Soc., 30 (2010), 899.10.1016/j.jeurceramsoc.2009.10.002 ↗
16. Chaim R., Mat. Sci. Eng. A-Struct, 486 (2008), 439.10.1016/j.msea.2007.09.022 ↗
17. Li J., Tang Z., Zhang Z., Luo S., Mater. Sci. Eng. B-Adv, 99 (2003), 321.10.1016/S0921-5107(02)00563-9 ↗
18. Kim M., Laine R.M., J. Am. Ceram. Soc., 93 (2010), 709.10.1111/j.1551-2916.2009.03498.x ↗
19. Sagel-Ransijn C.D., Winnubst A.J.A., Burggraaf A.J., Verweij H., J. Eur. Ceram. Soc., 17 (1996), 1133.10.1016/S0955-2219(96)00217-8 ↗
20. Theunissen G.S.A.M., Winnubst A.J.A., Burggraaf A.J., J. Eur. Ceram. Soc., 11 (1993), 315.10.1016/0955-2219(93)90031-L ↗
21. Asar N.V., Korkmaz T., Gül E.B., Mater. Design., 31 (1993), 2540.10.1016/j.matdes.2009.11.033 ↗
22. Rasmussen S.T., Ngaji-Okumu W., Boenke K., O Brien W.J., Dent. Mater., 13 (1997), 43.10.1016/S0109-5641(97)80007-3 ↗
23. Wang H., Liao Y., Chao Y., Liang X., Dent. Mater., 23 (2007), 1108.10.1016/j.dental.2006.06.041 ↗
24. Holland T.B., Anselmi-Tamburini U., Quach D.V., Tran T.B., Mukherjee A.K., J. Eur. Ceram. Soc., 32 (2012), 3667.10.1016/j.jeurceramsoc.2012.02.033 ↗
25. Raj P.M., Odulena A., Cannon W.R., Acta Mater., 50 (2002), 2559.10.1016/S1359-6454(02)00083-6 ↗
26. Faes A., Fuerbringer J.M., Mohamedi D., Hessler-Wyser A., Caboche G., van Herle J., J. Power Sources, 196 (2011), 7058.10.1016/j.jpowsour.2010.07.092 ↗
27. Bashiri M., Geranmayeh A.F., Sci. Iran., 18 (2011), 1600.10.1016/j.scient.2011.08.031 ↗
28. Hang Y., Qu M., Ukkusuri S., Energ. Buildings, 43 (2011), 988.10.1016/j.enbuild.2010.12.024 ↗
29. Hollebeeck S., Borlon F., Schneider Y.J., Larondelle Y., Rogez H., Food Chem., 138 (2013), 1936.10.1016/j.foodchem.2012.11.041 ↗
30. Zhu Z., Zhang G., Luo Y., Ran W., Shen Q., Bioresource Technol., 112 (2012), 254.10.1016/j.biortech.2012.02.057 ↗
31. Sani E., Mercatelli L., Sans J.L., Sciti D., Sol. Energ. Mat. Sol. C., 140 (2015), 477.10.1016/j.solmat.2015.02.007 ↗
32. Pan W., Chen K., Ai N., Lü Z., Jiang S.P., J. Electrochem. Soc., 163 (2016), F106.10.1149/2.0801602jes ↗
33. Balachandran M., Devanathan S., Muraleekrishnan R., Bhagawan S.S., Mater. Design., 35 (2012), 854.10.1016/j.matdes.2011.03.077 ↗
34. Guaracho V.V., Kaminari N.M., Ponte M.J., Ponte H.A., J. Hazard. Mater., 172 (2009), 1087.10.1016/j.jhazmat.2009.07.100 ↗
35. Fang Y., Zhang Y., Song J., Fan H., Hu L., Mater. Design., 49 (2013), 421.10.1016/j.matdes.2013.01.040 ↗
36. Diler E.A., Ipek R., Compos. Part B. Eng., 50 (2013), 371.10.1016/j.compositesb.2013.02.001 ↗
37. Pongstabodee S., Monyanon S., Luengnaruemitchai A., Int. J. Hydrogen. Energ., 37 (2012), 4749.10.1016/j.ijhydene.2011.12.023 ↗
38. Bayhan M., Önel K., Mater. Design., 31 (2010), 3015.10.1016/j.matdes.2009.12.049 ↗
39. Shehzad A., Bashir M.J.K., Sethupathi S., Younus M., Lim J.W., IJPAES., 6 (2016), 255.
40. Diler E.A., Ipek R., Compos. Part. B. Eng., 50(2013) , 371.10.1016/j.compositesb.2013.02.001 ↗
41. Diler E.A., Ipek R., Mat. Sci. Eng. A-Struct., 548 (2012), 43.10.1016/j.msea.2012.03.066 ↗
42. Badwal S., Ciacchi F., Giampietro K., Solid State Ionics, 176 (2005), 169.10.1016/j.ssi.2004.06.012 ↗
43. Casellas D., Cumbrera F.L., Sánchez-Bajo F., Forsling W., Llanes L., Anglada M., J. Eur. Ceram. Soc., 21 (2001), 765.10.1016/S0955-2219(00)00273-9 ↗
44. ASTM C1327 – 08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics.
45. Smith D.K., Newkirk W., Acta Crystallogr., 18 (1965), 983.10.1107/S0365110X65002402 ↗
46. Bondars B., Heidemane G., Grabis J., Laschke K., Boysen H., Schneider J., Frey F., J. Mater. Sci., 30 (1995), 1621.10.1007/BF00375275 ↗
47. Hunter B.A., Howard C.J., Kim D.J., Austr. J. Phys., 51 (1998), 539.10.1071/P97060 ↗
48. Rietveld H.M., J. Appl. Crystallogr., 2 (1969), 65.10.1107/S0021889869006558 ↗
49. Bish D.L., Post J.E., Am. Mineral., 78 (1993), 932.
50. Bortolotti M., Lutterotti L., Lonardelli I., J. Appl. Crystallogr., 42 (2009), 538.10.1107/S0021889809008309 ↗
51. Lutterotti L., Matthies S., Wenk H.R., Schultz A.J., Richardson J., J. Appl. Phys., 81 (1997), 594.10.1063/1.364220 ↗
52. Lutterotti L., Ceccato R., Dal Maschio R., Pagani E., Mater Sci. Forum., 278 – 281 (1998), 87.10.4028/www.scientific.net/MSF.278-281.87 ↗
53. Momma K., Izumi F., J. Appl. Crystallogr., 44 (2011), 1272.10.1107/S0021889811038970 ↗
54. Kuz’minov Y.S., Lomonova E.E., Osiko V.V., Cubic zirconia and skull melting, Intl. Science Pub, Cambridge, 2008.
55. Pakharukova V.P., Moroz E.M., Zyuzin D.A., Ishchenko A.V., Dolgikh L.Y., Strizhak P.E., J. Phys. Chem. C., 119 (2015), 28828.10.1021/acs.jpcc.5b06331 ↗
56. Zhang X.J., Liu Z.P., J. Chem. Theory Comput., 11 (2015), 4885.10.1021/acs.jctc.5b00641 ↗
57. Kohara S., Salmon P.S., Adv. Phys., 1 (2016), 640.10.1080/23746149.2016.1232177 ↗
58. Zhao X., Vanderbilt D., Phys. Rev. B., 65 (2002), 0751051.10.1103/PhysRevB.65.075105 ↗
59. Ikeno H., Krause M., Höche T., Patzig C., Hu Y., Gawronski A., Tanaka I., Rüsse C., J. Phys.- Condens. Mat., 25 (2013), 165505.10.1088/0953-8984/25/16/165505 ↗
60. Yang X., Yang L., Lin S., Zhou R., J. Phys. Chem. C, 119 (2015), 6065.10.1021/acs.jpcc.5b05989 ↗
61. Gaunt A.J., May I., Collison D., Holmana, K.T., Pope M.T., J. Mol. Struct., 656 (2003), 101.
62. Bai Y., Dou Y., Xie L.H., Rutledge W., Li J.R., Zhou H.C., Chem. Soc. Rev., 45 (2016), 2327.10.1039/C5CS00837A ↗
63. Cunha F.S., Sczancoski J.C., Nogueira I.C., Oliveira De V.G., Lustosa S.M.C., Longo E., Cavalcante L.S., CrystEngComm, 17 (2015), 8207.10.1039/C5CE01662B ↗
64. Sinhamahapatra A., Jeon J.P., Kang J., Han B., Yu J.S., Sci. Rep.-UK, 6 (2016), 27218.10.1038/srep27218 ↗
65. Rahaman M.N., Sintering of Ceramics, CRC Press & Taylor and Francis Group, New York, 2008.
66. Badapanda T., Rout S.K., Cavalcante L.S., Sczancoski J.C., Panigrahi S., Sinha T.P., Longo E., Mater. Chem. Phys., 121 (2010), 147.10.1016/j.matchemphys.2010.01.008 ↗
67. Cheng K., Zhang L., Lu C., Tieu K., Sci. Rep.-UK, 6 (2016), 25427.10.1038/srep25427 ↗
68. Hosokawa M., Nogi, K., Naito, M., Yokoyama, T.U., Nanoparticle Technology Handbook., Elsevier, Amsterdam, 2008, p. 312.
69. Badapanda T., Senthil V., Rout S.K., Cavalcante L.S., Simoes A.Z., Sinha T.P., Panigrahi S., De Jesus M.M., Longo E., Varela J.A., Curr. Appl. Phys., 11 (2011), 1282.10.1016/j.cap.2011.03.056 ↗
70. Marques V.S., Cavalcante L.S., Sczancoski J.C., Alcantara A.F.P., Orlandi M.O., Moraes E., Longo, E., Varela J.A., Siu Li M., Santos M.R.M.C., Cryst. Growth Des., 10 (2010), 4752.10.1021/cg100584b ↗
71. Fábregas I.O., Reinoso M., Otal E., Kim M., J. Eur. Ceram. Soc., 36 (2016), 2043.10.1016/j.jeurceramsoc.2016.01.048 ↗
72. Subbanna M., Kapur P.C., Pradip P., Malghan S.G., Ceram. Int., 27 (2001), 57.10.1016/S0272-8842(00)00043-2 ↗
73. Pouchly V., Maca K., Shen Z., J. Eur. Ceram. Soc., 33 (2013), 2275.10.1016/j.jeurceramsoc.2013.01.020 ↗
74. Theunissen G.S.A.M., Winnubst A.J.A., Burggraaf A.J., J. Eur. Ceram. Soc., 11 (1993), 315.10.1016/0955-2219(93)90031-L ↗
75. Luo J., Stevens R., Ceram. Int., 25 (1999), 281.10.1016/S0272-8842(98)00037-6 ↗
76. Bundschuh W., Gahr K.H.Z., Tribol. Int., 27 (1994), 97.10.1016/0301-679X(94)90075-2 ↗
77. Marro F.G., Anglada M., J. Eur. Ceram. Soc., 32 (2012), 317.10.1016/j.jeurceramsoc.2011.08.019 ↗