Thermal and electrical properties of polyimide/PANI nanofiber composites prepared via in situ polymerization
Source abstract
Abstract
Abstract Polyimide/polyaniline nanofiber composites were prepared by in situ polymerization with various weight percentages of polyaniline (PANI) nanofibers. X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), proved the successful preparation of PANI nanofiber composite films. In addition, thermal stability of PI/PANI nanofiber composites was superior relative to PI, having 10 % gravimetric loss in the range of 623 °C to 671 °C and glass transition temperature of 289 °C to 297 °C. Furthermore, the values of the loss tangent tanδ and AC conductivity σAC of the nanocomposite films were notably higher than those of pure polyimide. The addition of 5 wt.% to 15 wt.% PANI nanofiber filler enhanced the activation energy of PI composites from 0.37 eV to 0.34 eV.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, College of Science, University of Baghdad , Iraq
References (16)
Show source-provided references
1. [1] Watcharaphalakorn S., Ruangchuay L., Chotpattananont D., Sirivat A., Schwank J., Polym. Int., 54 (2005), 1126.10.1002/pi.181510.1002/pi.1815 ↗
2. [2] Wang N., Chen Y., Ren J., Huang X., Chen X., Li G., Liu D., J. Polym. Res., 24 (2017), 42.10.1007/s10965-017-1198-310.1007/s10965-017-1198-3 ↗
3. [3] Rezaei F., Tavandashti N.P., Zahedi A.R., Res. Chem. Intermed., 40 (3), 1233.10.1007/s11164-013-1035-110.1007/s11164-013-1035-1 ↗
4. [4] Cho S., Kim M., Lee J.S., Jang J., Acs Appl. Mater. Inter., 7 (40) (2015), 22301.10.1021/acsami.5b0546710.1021/acsami.5b05467 ↗
5. [5] Ebrahim Sh.M., Soliman M.M., Abd El-Latif M.M., High. Perform. Polym., 22 (2010), 377.10.1177/095400830910379610.1177/0954008309103796 ↗
6. [6] Zhou D., Subramaniam S., Mark J., J. Macromol. Sci. A, 42 (2005), 113.10.1081/MA-20004696510.1081/MA-200046965 ↗
7. [7] Ahmad M.B., Gharayebi Y., Salit M.S., Hussein M.Z., Ebrahimiasl S., Dehzangi A., Int. J. Mol. Sci., 13 (2012), 4860.10.3390/ijms1304486010.3390/ijms13044860 ↗
8. [8] Chen D., Miao Y., Liu T., Acs Appl. Mater. Inter., 5 (2013), 1206.10.1021/am303292y10.1021/am303292y ↗
9. [9] Menshikova I.P., Pyshkina O.A., Levon K., Sergeyev V.G., Colloid J., 71 (2009), 233.10.1134/S1061933X0902012410.1134/S1061933X09020124 ↗
10. [10] Kausar A., Fiber Polym., 15 (2014), 2564.10.1007/s12221-014-2564-y10.1007/s12221-014-2564-y ↗
11. [11] Al-Ajaj I.A., Kareem A.A., Mater. Sci.-Poland, 34 (2016), 132.10.1515/msp-2016-002910.1515/msp-2016-0029 ↗
12. [12] Dai W., Yu J., Wang Y., Song Y., Bai H., Nishimura K., Liao H., Jiang N., Macromol. Res., 22 (2014), 13233.10.1007/s13233-014-2143-510.1007/s13233-014-2143-5 ↗
13. [13] Han M.G., Byun S.W., Im S.S., Polym. Adv. Technol., 13 (2002), 320.10.1002/pat.19210.1002/pat.192 ↗
14. [14] Li T., Hsu S.L., J. Phys. Chem. B, 114 (2010), 6825.10.1021/jp101857w10.1021/jp101857w ↗
15. [15] Kausar A., J. Thermoplast. Compos. Mater., 29 (3) (2016), 312.10.1177/0892705713518793
16. [16] Tommalieha M.J., Zihlifa A.M., Ragosta G., J. Exp. Nanosci., 6 (2011), 652.10.1080/17458080.2010.54795010.1080/17458080.2010.547950 ↗