journal article·2025-12-01Open access

Experimental and first-principles investigation of high entropy superalloys produced by powder injection moulding method

Emre Atakan Meric, Berke Soy, Ilven Mutlu

Materials Science-Poland· Volume 43· Issue 4

Abstract

Abstract In this study, AlCoCrFeMnNiTi based refractory-free high entropy superalloys (HESA) were prepared by powder injection moulding (PIM) for aviation applications. Aging was done in order to enhance mechanical properties. Ni-based superalloys are expensive and heavy due to expensive alloying elements with high density. Strength, oxidation and creep resistance of the high entropy alloys are low for engine applications. HESA would be cheaper and lighter than superalloys and would have higher strength, creep resistance and oxidation resistance than high entropy alloys. In order to obtain solid solution, mixing entropy and mixing enthalpy values were adjusted. Valance electron concentrations was adjusted in order to obtain face centered cubic structure. There is grain-coarseing and segregation in HESA produced by vacuum arc melting. HESA with finer grain sizes and low segregation could be produced by using mechanical alloying (MA)-PIM. Alloy powders were prepared by MA. Alloys with high solid solubility, complex shaped, fine grained superalloy specimens were produced by MA-PIM. Polymer binder consisted polyethylene, paraffin, and stearic acid. Feedstock consisted of 45% of binder and 55% of alloy powder. PIM was carried out at 185°C. After the PIM, binder was removed by chemical debinding and thermal debinding. Sintering was carried out at 1,250°C. Elevated temperature properties of the HESA was enhanced by intermetallic precipitates which were obtained by alloying and heat treatments. Corrosion properties, high temperature oxidation properties, thermal properties, mechanical properties were determined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Injection Molding Process and Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Istanbul University-Cerrahpasa , Istanbul , 34320 , Turkey

References (37)

Show source-provided references
1. Chen, Y.T., Chang, Y.J., Murakami, H., Gorsse, S., Yeh, A.C., Designing high entropy superalloys for elevated temperature application, Scr. Mater., 2020, 187: 177–18210.1016/j.scriptamat.2020.06.002 ↗
2. Whitfield, T.E., Stone, H.J., Jones, C.N., Jones, N.G., Microstructural degradation of the AlMo0.5NbTa0.5TiZr refractory metal high-entropy superalloy at elevated temperatures, Entropy, 2021, 23(1): 8010.3390/e23010080 ↗
3. Yang, J.J., Kuo, C.M., Lin, P.T., Liu, H.C., Huang, C.Y., Yen, H.W., et al., Improvement in oxidation behavior of Al0.2Co1.5CrFeNi1.5Ti0.3 high-entropy superalloys by minor Nb addition, J. Alloy. Compd., 2020, 825: 1539810.1016/j.jallcom.2020.153983 ↗
4. Senkov, O.N., Jensenb, J.K., Pilchaka, A.L., Miracle, D.B., Fraser, H.L., Compositional variation effects on the microstructure and properties of a refractory high-entropy superalloy AlMo0.5NbTa0. 5TiZr, Mater. Des., 2018, 139: 498–51110.1016/j.matdes.2017.11.033 ↗
5. Shafiee, A., Moon, J., Kim, H.S., Jahazi, M., Nili-Ahmadabadi, M., Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy, Mater. Sci. Eng. A, 2019, 749: 271–28010.1016/j.msea.2019.02.009 ↗
6. Yurchenko, N., Panina, E., Rogal, Ł., Shekhawat, L., Zherebtsov, S., Stepanov, N., Unique precipitations in a novel refractory Nb-Mo-Ti-Co high-entropy superalloy, Mater. Res. Lett., 2022, 10(2): 78–8710.1080/21663831.2021.2022033 ↗
7. Cai, Y., Liu, F., Tan, Y., Wang, L., Ji, X., Xiang, S., Synergy effect of multi-strengthening mechanisms in CoNiCr-based high-entropy superalloy at cryogenic temperature, Mater. Sci. Eng. A, 2024, 901: 14653110.1016/j.msea.2024.146531 ↗
8. Li, Y., Olejarz, A., Kurpaska, Ł., Lu, E., Alava, M.J., Kim, H.S., et al., Designing cobalt-free face-centered cubic high-entropy alloys: A strategy using d-orbital energy level, Int. J. Refract. Met. Hard Mater., 2024, 124: 10683410.1016/j.ijrmhm.2024.106834 ↗
9. Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., et al., Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility, Acta Mater., 2018, 144: 129e13710.1016/j.actamat.2017.10.058 ↗
10. Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., et al., Research progress on low-pressure powder injection molding, Materials, 2023, 16: 37910.3390/ma16010379 ↗
11. Dehghan-Manshadi, A., Yu, P., Dargusch, M., StJohn, D., Qian, M., Metal injection moulding of surgical tools, biomaterials and medical devices: A review, Powder Technol., 2020, 364: 189–20410.1016/j.powtec.2020.01.073 ↗
12. Aslam, M., Ahmad, F., Binti, P.S.M., Yusoff, M., Altafa, K., Omar, M.A., et al., Powder injection molding of biocompatible stainless steel biodevices, Powder Technol., 2016, 295: 84–9510.1016/j.powtec.2016.03.039 ↗
13. Won Lee, D., Shin, D.S., Ha, H., Park, S.J., Lee, K.A., Kim, H.S., Modulated heating rate effect on optimizing sintered density and microstructure in CoCrFeMnNi high-entropy alloy fabricated through metal injection molding, Mater. Charact., 2024, 214: 11403710.1016/j.matchar.2024.114037 ↗
14. Meza, A., Barbosa, A., Tabares, E., Torralba, J.M., Tailoring high-entropy alloys via commodity powders for metal injection moulding: A feasibility study, J. Mater. Res. Technol., 2024, 31: 109–11610.1016/j.jmrt.2024.06.034 ↗
15. Kang, B., Kong, T., Ryu, H.J., Hong, S.H., The outstanding tensile strength of Ni-rich high entropy superalloy fabricated by powder metallurgical process, Mater. Chem. Phys., 2019, 235: 12174910.1016/j.matchemphys.2019.121749 ↗
16. Suryanarayana, C., Mechanical alloying and milling, Prog. Mater. Sci., 2001, 46(1): 18410.1016/S0079-6425(99)00010-9 ↗
17. Suryanarayana, C., Mechanical alloying: A critical review, Mater. Res. Lett., 2022, 10(10): 619–64710.1080/21663831.2022.2075243 ↗
18. Miracle, D.B., Senkov, O.N., A critical review of high entropy alloys and related concepts, Acta Mater., 2017, 122: 448–51110.1016/j.actamat.2016.08.081 ↗
19. Cantor, B., Multicomponent high-entropy Cantor alloys, Prog. Mater. Sci., 2021, 120: 10075410.1016/j.pmatsci.2020.100754 ↗
20. Segall, M.D., Lindan, P.J., Probert, M.A., Pickard, C.J., Hasnip, P.J., Clark, S.J., et al., First-principles simulation: ideas, illustrations and the CASTEPcode, J. Phys. Cond. Matter., 2002, 14: 2717–274410.1088/0953-8984/14/11/301 ↗
21. Clark, S.J., Segall, M.D., Pickard, C.J., Hasnip, P.J., Probert, M.I., Refson, K., et al., First principles methods using CASTEP, Z. Kristallogr.-Cryst. Mater., 2005, 220: 567–57010.1524/zkri.220.5.567.65075 ↗
22. Chen, H.L., Lin, L., Mao, P.L., Liu, Z., Phase stability, electronic, elastic and thermodynamic properties of Al-RE intermetallics in Mg-Al-RE alloy: A first principles study, J. Magnes. Alloy., 2015, 3: 197–20210.1016/j.jma.2015.08.003 ↗
23. Sahara, R., Emura, S., Tsuchiya, K., Theoretical investigation of effect of alloying elements on phase stability in body-centered cubic Ti-X alloys (X= V, Cr, Fe, Co, Nb, and Mo), J. Alloy. Compd., 2015, 634: 193–19910.1016/j.jallcom.2015.02.005 ↗
24. Mao, P., Yu, B., Liu, Z., Wang, F., Ju, Y., First-principles calculations of structural, elastic and electronic properties of AB2 type intermetallics in Mg–Zn–Ca–Cu alloy, J. Magnes. Alloy., 2013, 1: 256–26210.1016/j.jma.2013.10.001 ↗
25. Lozynskyi, V., Trembach, B., Hossain, M.M., Kabir, M.H., Silchenko, Y., Krbata, M., et al., Prediction of phase composition and mechanical properties Fe–Cr–C–B–Ti–Cu hardfacing alloys: Modeling and experimental Validations, Heliyon, 2024, 10: e2519910.1016/j.heliyon.2024.e25199 ↗
26. Shitara, K., Yokota, K., Yoshiya, M., Umeda, J., Kondoh, K., First-principles design and experimental validation of β-Ti alloys with high solid-solution strengthening and low elasticities, Mater. Sci. Eng. A, 2022, 843: 14305310.1016/j.msea.2022.143053 ↗
27. Wang, Z.P., Fang, Q.H., Li, J., Liu, B., First-principles predictions of structural, mechanical and electronic properties of βTiNb under high pressure, Superlattices Microstruct., 2018, 116: 141–15010.1016/j.spmi.2018.02.004 ↗
28. Jiang, D.Y., Ouyang, C.Y., Liu, S.Q., Mechanical properties of W–Ti alloys from first-principles calculations, Fusion Eng. Des., 2016, 106: 34–3910.1016/j.fusengdes.2016.03.028 ↗
29. Wu, Z., Malmir, H., Benafan, O., Lawson, J.W., Predicting the martensitic transition temperatures in ternary shape memory alloys Ni0.5Ti0.5− xHfx from first principles, Acta Mater., 2023, 261: 11936210.2139/ssrn.4540241 ↗
30. Mutlu, I., Ekinci, S., Oktay, E., Characterization of heat treated titanium-based implants by nondestructive eddy current and ultrasonic tests, J. Mater. Eng. Perform., 2014, 238(6): 2083–209110.1007/s11665-014-0986-8 ↗
31. German, R., Bose, M.A., Injection molding of metals and ceramics, metal powder industries federation, Vol. 105, College Road East Princeton, New Jersey, 1997
32. Chen, J., Zhou, X., Wang, W., Liu, B., Lv, Y., Yang, W., et al., A review on fundamental of high entropy alloys with promising high temperature properties, J. Alloy. Compd., 2018, 760: 15e3010.1016/j.jallcom.2018.05.067 ↗
33. Antonov, S., Detrois, M., Tin, S., Design of novel precipitate-strengthened Al-Co-Cr-Fe-Nb-Ni high-entropy superalloys, Metall. Mater. Trans. A, 2018, 49A: 30510.1007/s11661-017-4399-9 ↗
34. He, J.Y., Wang, H., Huang, H.L., Xu, X.D., Chen, M.W., Wu, Y., et al., A precipitation-hardened high-entropy alloy with outstanding tensile properties, Acta Mater., 2016, 102: 187–19610.1016/j.actamat.2015.08.076 ↗
35. Eißmann, N., Mühle, U., Gaitzsch, U., Walther, G., Weißgärber, T., Kieback, B., Precipitation hardening of high entropy alloy CoCrFeMnNi containing titanium, J. Alloy. Compd., 2021, 857: 15761010.1016/j.jallcom.2020.157610 ↗
36. https://www.metal.com/
37. https://www.lme.com/