Optimization of sol-gel technique for coating of metallic substrates by hydroxyapatite using the Taguchi method
Source abstract
Abstract
In this study, the Taguchi method of design of experiment (DOE) was used to optimize the hydroxyapatite (HA) coatings on various metallic substrates deposited by sol-gel dip-coating technique. The experimental design consisted of five factors including substrate material (A), surface preparation of substrate (B), dipping/withdrawal speed (C), number of layers (D), and calcination temperature (E) with three levels of each factor. An orthogonal array of L18 type with mixed levels of the control factors was utilized. The image processing of the micrographs of the coatings was conducted to determine the percentage of coated area (PCA). Chemical and phase composition of HA coatings were studied by XRD, FT-IR, SEM, and EDS techniques. The analysis of variance (ANOVA) indicated that the PCA of HA coatings was significantly affected by the calcination temperature. The optimum conditions from signal-to-noise (S/N) ratio analysis were A: pure Ti, B: polishing and etching for 24 h, C: 50 cm min−1, D: 1, and E: 300 °C. In the confirmation experiment using the optimum conditions, the HA coating with high PCA of 98.5 % was obtained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Zhang J.X., Guan R.F., Zhang X.P., J. Alloy. Compd., 509 (2011), 4643.10.1016/j.jallcom.2011.01.196 ↗
2. Mavis B., Taş A.C., J. Am. Ceram. Soc., 83 (2000), 989.10.1111/j.1151-2916.2000.tb01314.x ↗
3. Brinker C., Frye G., Hurd A., Ashley C., Thin Solid Films, 201 (1991), 97.10.1016/0040-6090(91)90158-T ↗
4. Carradò A., Viart N., Solid State Sci., 12 (2010), 1047.10.1016/j.solidstatesciences.2010.04.014 ↗
5. Hijón N., Victoria Cabañas M., Peña J., Vallet-Regí M., Acta Biomater., 5 (2006), 567.10.1016/j.actbio.2006.05.004 ↗
6. Aksakal B., Hanyaloglu C., J. Mater. Sci. Mater. Med., 5 (2008), 2097.10.1007/s10856-007-3304-2 ↗
7. Qu J., Lu X., Li D., Ding Y., Leng Y., Weng J., Qu S., Feng B., Watari F., J. Biomed. Mater. Res. B, 1 (2011) 40.10.1002/jbm.b.31784 ↗
8. Corriu R., Trong Anh N., Molecular chemistry of sol-gel derived nanomaterials molecular chemistry, John Wiley & Sons, West Sussex, 2009.10.1002/9780470742778 ↗
9. Sakka S., Handbook of sol-gel science and technology, Kluwer Academic Publisher, Massachusetts, 2004.
10. Krechetnikov R., Homsy G., Phys. Fluids, 17 (2005), 10218/1.
11. Arfsten N.J., Eberle A., Otto J., Reich A., J. Sol-Gel Sci. Techn., 8 (1997), 1099.
12. Wang D.G., Chen C.Z., Ma J., He T., Appl. Surf. Sci., 257 (2011) 2592.10.1016/j.apsusc.2010.10.028 ↗
13. Nayak J.P., Bera J., Appl. Surf. Sci., 257 (2010), 458.10.1016/j.apsusc.2010.07.011 ↗
14. Ma J., Chen C.Z., Wang D.G., Meng X.G., Shi J.Z., Ceram. Int., 36 (2010), 1911.10.1016/j.ceramint.2010.03.017 ↗
15. Fathi M.H., Hanifi A., Mater. Lett., 61 (2007) 3978.10.1016/j.matlet.2007.01.028 ↗
16. Byrne D.M., Taguchi S., 40th annual quality congress, Anaheim, CA, 40 (1986) 168.
17. Taguchi G., Tables of orthogonal arrays and linear graphs, Maruzen, Tokyo, 1962.
18. Antony J., Antony F.J., Work Study Manag. Services, 50 (2001), 141.10.1108/00438020110391873 ↗
19. Roy R.K., A primer on the Taguchi method, Society of Manufacturing Engineers, Michigan, 1990.
20. Tofighy M.A., Mohammadi T., Mater Res. Bull., 47 (2012), 2389.10.1016/j.materresbull.2012.05.027 ↗
21. Jose S., Fangueiro J.F., Smitha J., Cinu T.A., Chacko A.J., Premaletha K., Souto E.B., Colloid. Surf. B, 92 (2012), 175.10.1016/j.colsurfb.2011.11.040 ↗
22. Suresh Kumar G., Girija E.K., Thamizhavel A., Yokogawa Y., Narayana Kalkura S., J. Colloid Interfac. Sci., 349 (2010), 56.10.1016/j.jcis.2010.05.038 ↗
23. Ergun C., J. Eur. Ceram. Soc. 28 (2008), 2137.10.1016/j.jeurceramsoc.2008.03.007 ↗
24. Paluszkiewicz C., et al. J. Mol. Struct. 976 (2010), 301.10.1016/j.molstruc.2010.04.001 ↗
25. Jastrzeębski W., Sitarz M., Rokita M., Bułat K., Spectrochim. Acta A, 79 (2011), 722.10.1016/j.saa.2010.08.044 ↗
26. Wang Z.-C., Ni Y.-J., Huang J.-C., J. Biomed Sci. Eng. 1 (2008), 190.10.4236/jbise.2008.13032 ↗
27. Bendell A., Disney J., Pridmore W.A., Taguchi methods: applications in world industry, IFS Publications, UK, 1989.
28. Liu D.M., Chan H.M., Wu J.D., J. Mater. Sci., 5 (1994), 147.
29. Guglielmi M., Zenezini S., J. Non-Cryst. Solids, 121 (1990), 303.10.1016/0022-3093(90)90148-F ↗
30. Balamurugan A., Balossier G., Kannan S., Michel J., Rajeswari S., Mater. Sci. Eng. C, 27 (2007), 162.10.1016/j.msec.2006.04.006 ↗