journal article·2018-03-01Open access

Characterization of mechanical properties of barium titanate ceramics with different grain sizes

Tomasz Trzepiecinski, Magdalena Gromada

Materials Science-Poland· Volume 36· Issue 1

Abstract

Abstract In this paper, three BaTiO3 powders of various particle size distributions were obtained as a result of mechanical activation in the mixer mill. Green barium titanate pellets and cylindrical specimens were fabricated by both uniaxial and isostatic pressing methods. As a result of the application of different maximal sintering temperatures, the obtained materials were characterized by various average grain sizes: 0.8 μm, 20 μm and 31.0 μm. The basic properties of sintered pellets and cylinders were determined and the influence of materials average grain size on their Young’s modulus and compressive strength were determined through compression tests in a uniaxial testing machine, Zwick/Roell Z100. The elastic properties were similar for tested materials with a different grain size. However, the microstructure of BaTiO3 strongly influenced the compressive strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Rzeszow University of Technology, Department of Materials Forming and Processing, Al. Powst. Warszawy 8, 35-959 Rzeszów , Poland

Institute of Power Engineering, Ceramic Department CEREL, ul. Techniczna 1, 36-040 Boguchwała , Poland

References (19)

Show source-provided references
1. [1] DENT A.C., BOWEN C.R., STEVENS R., CAIN M.G., STEWART M., J. Eur. Ceram. Soc., 27 (2007), 3739.10.1016/j.jeurceramsoc.2007.02.031
2. [2] SHIN Y.I., KANG K.M., JUNG Y.G., YEO J.G., LEE S.G., PAIK U., J. Eur. Ceram. Soc., 23 (2003), 1427.10.1016/S0955-2219(02)00346-1
3. [3] RYU S.S., KIM H.T., KIM H.J., KIM S., J. Ceram. Soc. Jpn., 117 (2009), 811.10.2109/jcersj2.117.811 ↗
4. [4] BLAMEY J.M., Investigation into the strength, toughness and porosity of barium titanate PTC ceramics, Durham University, Durham, 1990.
5. [5] LAZAREVI´C Z., ROMˇCEVI´C N., VIJATOVI´C M., PAUNOVI´C N., ROMˇC EVI´C M., STOJANOVI´C B., DOHˇCEVI´C -MITROVI´C Z., Acta Phys. Pol. A, 115 (2009), 808.10.12693/APhysPolA.115.808 ↗
6. [6] ALMOND E.A., ROEBUCK B., GEE M.G., Inst. Phys. Conf. Ser., 75 (1986), 155.
7. [7] BLAMEY J.M., PARRY T.V., J. Mater. Sci., 28 (1993), 4988.10.1007/BF00361166
8. [8] CTIBOR P., SEINER H., SEDLACEK J., PALA Z., VANEK P., Ceram. Int., 39 (2013), 5039.10.1016/j.ceramint.2012.11.102 ↗
9. [9] ZHAO M.H., BONNELL D.A., VOHS J.M., Surf. Sci., 602 (2008), 2849.10.1016/j.susc.2008.07.011 ↗
10. [10] MICLEA C., T˘AN˘ASOIU C., SP˘ANULESCU I., MICLEA C.F., GHEORGHIU A., AMARANDE L., CIOANGHER M., MICLEA C.T., Rom. J. Inf. Sci. Tech., 10 (2007), 335.
11. [11] PRASAD V.C.S., KUMAR L.G.K., Ferroelectrics, 102 (1990), 141.10.1080/00150199008221472
12. [12] ARLT G., PENSES H., Ferroelectrics, 48 (1983), 213.10.1080/00150198308227857
13. [13] VIJATOVI´C M.M., BOBI´C J.D., STOJANOVI´C B.D., Sci. Sinter., 40 (2008), 155.10.2298/SOS0802155V10.2298/SOS0802155V ↗
14. [14] GROMADA M., BIGLAR M., TRZEPIECI´NSKI T., STACHOWICZ F., B. Mater. Sci., 40 (2017), 759.10.1007/s12034-017-1406-0 ↗
15. [15] DURAN P., GUTIERREZ D., TARTAJ J., MOURE C., Ceram. Int., 28 (2002), 283.10.1016/S0272-8842(01)00092-X ↗
16. [16] UCHINO K., Advanced piezoelectric materials, science and technology, Woodhead Publishing, Duxford, 2017.
17. [17] Verband der Keramischen Industrie e.V., Brevier technical ceramics, Verlag Hans Fahner GmbH & Co. KG, Lauf, 2003.
18. [18] MITTAL J.P., KAUR I., SHARMA R.C., Encyclopedia of technical education - industrial engineering and materials, Mittal Publications, New Delhi, 1992.
19. [19] GOPALAKRISHNAN K., MECHOLSKY J.J., J. Eur. Ceram. Soc., 34 (2014), 3247.10.1016/j.jeurceramsoc.2014.03.019