journal article·2019-12-01Open access

Preparation of ceramic nanofibers of iron vanadate using electrospinning method

Yasaman Khaksarfard, Hakimeh Ziyadi, Akbar Heydari

Materials Science-Poland· Volume 37· Issue 4

Abstract

Abstract Because of special characteristics of vanadate compound, such as its sustainability, magneticity, high selectivity in reactions and catalytic character, this study aimed to preparation and analyzing novel ceramic iron vanadate (FeVO 4 ) nanofibers. The ceramic nanofibers of iron vanadate were made by the combination of sol-gel and electrospinning methods. First, polyvinyl alcohol (PVA), as a matrix polymer, was mixed separately with ammonium metavanadate (NH 4 VO 3 ) and iron (III) nitrate (Fe(NO 3 ) 3 ). As a result, the spinnable polymeric gel was obtained from the controlled mixture of these two precursors of ceramic material. Electrospinning of PVA/iron (III) nitrate/ammonium vanadate solution was done using an Electroris setup that enabled preparation of polymeric template nanofiber. Finally, iron vanadate nanofiber was obtained by calcination of polymer nanofiber at controlled temperature. The products were characterized with scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM) and Brunauer-Emmett-Teller (BET) surface area analysis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Supercapacitor Materials and Fabrication · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Active Pharmaceutical Ingredients Research Center , Tehran Medical Sciences, Islamic Azad University , Tehran , Iran

Department of Organic Chemistry, Faculty of Pharmaceutical Chemistry , Tehran Medical Sciences, Islamic Azad University , Tehran , Iran

Chemistry Department , Tarbiat Modares University , Tehran , Iran

References (35)

Show source-provided references
1. [1] Lim K., Teck CH., Prog. Polym. Sci., 70 (2017), 1.
2. [2] Teo W.E., Ramakrishna S., Nanotechnology, 17 (2006), 79.10.1088/0957-4484/17/14/R011966157210.1088/0957-4484/17/14/R01 ↗
3. [3] Patil J.V., Mali S.S., Kamble A.S., Hong CH.K., Kim J.H., Patil P.S., Appl. Surf. Sci., 423 (2017), 641.10.1016/j.apsusc.2017.06.11610.1016/j.apsusc.2017.06.116 ↗
4. [4] Xue J., Xie J., Liu W., Xia Y., Acc. Chem. Res., 50 (2017), 1976.10.1021/acs.accounts.7b0021865890942877753510.1021/acs.accounts.7b00218 ↗
5. [5] Thenmozhi S., Dharmaraj N., Kadirvelu K., Yong Kim H., Mater. Sci. Eng. B-Adv., 217 (2017), 36.10.1016/j.mseb.2017.01.00110.1016/j.mseb.2017.01.001 ↗
6. [6] Dai Y., Liu W., Formo E., Sun Y., Xia Y., Polym. Advan. Technol., 22 (2011), 326.10.1002/pat.183910.1002/pat.1839 ↗
7. [7] Esfahani H., Jose R., Ramakrishna S., Materials, 10 (2017), 1238.10.3390/ma1011123857061852907707410.3390/ma10111238 ↗
8. [8] Li D., Xia Y., Adv. Mater., 16 (2004), 1151.10.1002/adma.20040071910.1002/adma.200400719 ↗
9. [9] Massaglia G., Quaglio M., Mat. Sci. Semicon. Proc., 73 (2018), 13.10.1016/j.mssp.2017.06.04710.1016/j.mssp.2017.06.047 ↗
10. [10] Li L., Peng SH., Lee J.K.Y., Ji D., Srinivasan M., Ramakrishna S., Nano Energy, 39 (2017), 111.10.1016/j.nanoen.2017.06.05010.1016/j.nanoen.2017.06.050 ↗
11. [11] Chang Y., Zeng H.CH., Cryst. Growth Des., 4 (2004), 397.10.1021/cg034127m10.1021/cg034127m ↗
12. [12] Marberger A., Ferri D., Elsener M., Sagar A., Kröcher O., Appl. Catal. B-Environ., 218 (2017), 731.10.1016/j.apcatb.2017.06.06110.1016/j.apcatb.2017.06.061 ↗
13. [13] Sanjeewa L.D., McMillen C.D., Willett D., Chumanov G., Kolis J.W., J. Solid State Chem., 236 (2016), 61.10.1016/j.jssc.2015.07.03910.1016/j.jssc.2015.07.039 ↗
14. [14] Kalai S.R., Gedanken A., Anilkumar P., Manikandan G., Karunakaran C., J. Cluster Sci., 20 (2009), 2991.
15. [15] Parhi P., Upreti SH., Ramanan A., Cryst. Growth Des., 10 (2010), 5078.10.1021/cg100703h10.1021/cg100703h ↗
16. [16] Golmojdeh H., Zanjanch M.A., J. Electron. Mater., 43 (2014), 528.10.1007/s11664-013-2921-410.1007/s11664-013-2921-4 ↗
17. [17] Palacio L.A., Silva E.R., Catalao R., Silva J.M., Hoyos D.A., Ribeiro F.R., Ribeiro M.F., J. Hazard. Mater., 153 (2008), 628.10.1016/j.jhazmat.2007.09.00610.1016/j.jhazmat.2007.09.006 ↗
18. [18] Reddy CH.V.S., Yeo I.H., Il-Mho S., J. Phys. Chem. Solids, 69 (2008), 1261.10.1016/j.jpcs.2007.10.07210.1016/j.jpcs.2007.10.072 ↗
19. [19] Huang L., Shi L., Zhao X., Xu J., Li H., Zhang J., Zhang D., CrystEngComm., 16 (2014), 5128.10.1039/C3CE42608D10.1039/C3CE42608D ↗
20. [20] Gholamzadeh B.M., Mousavi S.H., Rangraz J.M., J. Mater. Sci-Mater. El., 28 (2017), 1480.10.1007/s10854-016-5684-x10.1007/s10854-016-5684-x ↗
21. [21] Poizote PH., Lauruelle S., Touboul M., Tarascon J.-M., C.R. Chim., 6 (2003), 125.10.1016/S1631-0748(03)00015-810.1016/S1631-0748(03)00015-8 ↗
22. [22] Nithya V.D., Selvan R.K., Mater. Res. Bull., 406 (2011), 24.10.1016/j.physb.2010.10.00410.1016/j.physb.2010.10.004 ↗
23. [23] Nithya V.D., Kalai R.S., Sanjeeviraja C., Mohan R.D., Arumugam S., Mater. Res. Bull., 46 (2011), 1654.10.1016/j.materresbull.2011.06.00510.1016/j.materresbull.2011.06.005 ↗
24. [24] Kaneti Y.V., Liu M., Zhang X., Bu Y., Yu Y., Sensor. Actuat. B-Chem., 236 (2016), 173.10.1016/j.snb.2016.05.14210.1016/j.snb.2016.05.142 ↗
25. [25] Heydari A., Sheykhan M., Sadeghi M., Radfar I., Inorg. Nano-Met. Chem., 47 (2017), 248.10.1080/15533174.2016.118603510.1080/15533174.2016.1186035 ↗
26. [26] Ma H., Yang X., Tao Z., Liang J., Chen J., CrystEngComm., 13 (2011), 897.10.1039/C0CE00273A10.1039/C0CE00273A ↗
27. [27] Lee H.S., Mo K.J., Oh G.S., Soonim S., Mater. Chem. Phys., 194 (2017), 313.
28. [28] Luo L., Fei Y., Chen K., Li D., Qia H., J. Alloy. Compd., 649 (2015), 1019.10.1016/j.jallcom.2015.07.26510.1016/j.jallcom.2015.07.265 ↗
29. [29] Lutta S.T., Dong H., Zavalij P.Y., Whittingham M.S., Mater. Res. Bull., 40 (2005), 383.10.1016/j.materresbull.2004.10.00510.1016/j.materresbull.2004.10.005 ↗
30. [30] Wang F., Zhang H., Liu L., Shin B., Shan F.K., J. Alloy. Compd., 672 (2016), 229.10.1016/j.jallcom.2016.02.08910.1016/j.jallcom.2016.02.089 ↗
31. [31] Reneker D.H., Chun I., Nanotechnology, 7 (1996), 216.10.1088/0957-4484/7/3/00910.1088/0957-4484/7/3/009 ↗
32. [32] Wongsasulak S., Patapeejumruswong M., Weiss J., Supaphol P., Yoovidhya T., J. Food Eng., 98 (2010), 370.10.1016/j.jfoodeng.2010.01.01410.1016/j.jfoodeng.2010.01.014 ↗
33. [33] Coates J., Interpretation of Infrared Spectra. A Practical Approach Encyclopedia of Analytical Chemistry, John Wiley & Sons Ltd., Chichester, 2000, p. 10815.10.1002/9780470027318.a560610.1002/9780470027318.a5606 ↗
34. [34] Vuk S.A., Orel B., Dragic G., J. Solid State Electr., 5 (2001), 437.
35. [35] Williamson J.K., Smallman R.E., Philos. Mag., 1 (1956), 34.10.1080/1478643560823807410.1080/14786435608238074 ↗