Controlling of optical band gap of the CdO films by zinc oxide
Source abstract
Abstract
Abstract In this study, CdZnO films prepared at different ratios of dopants (CdO:ZnO = 5:5, CdO:ZnO = 6:4, and CdO:ZnO = 8:2) were coated on glass surface by using the sol-gel spin coating technique. After this process, surface structure and optical properties of the CdZnO films was investigated by atomic force microscopy (AFM) and UV-Vis spectroscopy. The surface structure of the CdZnO films depended on the content of ZnO and CdO in the films. Low percentage of CdO films were very similar to the ZnO film but higher amount of CdO resuted in granular structures together with pure structure of ZnO in the films. Eg values of produced CdZnOs depended on the additions of CdO and ZnO. The obtained Eg values of the produced CdO:ZnO = 5:5 (S3), CdO:ZnO = 6:4 (S4), and CdO:ZnO = 8:2 (S5) films are 2.5 eV, 2.49 eV, and 2.4 eV, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Firat University , Faculty of Technology, Metallurgy and Material Engineering Department , 2311 , Turkey
References (28)
Show source-provided references
1. [1] Dagdelen F., Serbetci Z., Gupta R.K., Yakuphanoglu F., Mater. Lett., 80 (2012), 127-130.10.1016/j.matlet.2012.04.08710.1016/j.matlet.2012.04.087 ↗
2. [2] Gupta R.K., Cavaş M., Yakuphanoğlu F., Spectrochim Acta. - Part A Mol Biomol Spectrosc, 95 (2012), 107-113.10.1016/j.saa.2012.04.01210.1016/j.saa.2012.04.012 ↗
3. [3] İsmail R.A., Abdulrazaq O.A., Sol. Energy Mater. Sol Cells, 91 (2007), 903-907.10.1016/j.solmat.2007.02.00610.1016/j.solmat.2007.02.006 ↗
4. [4] Kim H., Horwitz J.S., Kustho G.P., Qadri S.B., Kafafi Z.H., Chrisey D.B., Appl. Phys. Lett., 78 (2001), 1050-1052.10.1063/1.135059510.1063/1.1350595 ↗
5. [5] Lokhande B.J., Patil P.S., Uplane M.D., Mater. Chem. Phys., 84 (2004), 238-242.10.1016/S0254-0584(03)00231-110.1016/S0254-0584(03)00231-1 ↗
6. [6] Subramanyam T., Uthanna S., Srinivasulu Naidu B., Mater. Lett., 35 (1998), 214-220.10.1016/S0167-577X(97)00246-210.1016/S0167-577X(97)00246-2 ↗
7. [7] Balasubramanian M., Jayabalan V., Balasubramanian V., Mater. Des., 29 (2008), 92-97.10.1016/j.matdes.2006.12.00110.1016/j.matdes.2006.12.001 ↗
8. [8] Pathak T.K., Rajput J.K., Kumar V., Purohit L.P., Swart H.C. Kroon R.E., J Colloid Interface Sci., 487, (2017), 378-387.10.1016/j.jcis.2016.10.06210.1016/j.jcis.2016.10.062 ↗
9. [9] Reddy K.T.R, Shanthini G.M., Johnston D., Miles R.W., Thin Solid Films, 427 (2003), 397-400.10.1016/S0040-6090(02)01183-510.1016/S0040-6090(02)01183-5 ↗
10. [10] El Sayed A.M., Taha S., Said G., Yakuphanoğlu F., Superlattices Microstruct., 65 (2014), 35-47.10.1016/j.spmi.2013.10.04110.1016/j.spmi.2013.10.041 ↗
11. [11] Maiti U.N., Ghosh P.K., Ahmed S.F., Mitra M.K, Chattopadhyay K.K., J. Sol-Gel Sci. Technol., 41 (2007), 87-92.10.1007/s10971-006-0116-710.1007/s10971-006-0116-7 ↗
12. [12] Thirumoorthi M., Prahash J.T.J., J Asian. Ceram. Soc., 4 (2016), 39-45.10.1016/j.jascer.2015.11.00110.1016/j.jascer.2015.11.001 ↗
13. [13] Ziabari A.A., Ghods F.E., J Alloys Compd., 509 (2011), 8748-8755.10.1016/j.jallcom.2011.06.05010.1016/j.jallcom.2011.06.050 ↗
14. [14] Verma K., Chaudhary B., Kumar V., Sharma V., Kumar M., Vacuum, 146 (2017), 524-529.10.1016/j.vacuum.2017.06.03110.1016/j.vacuum.2017.06.031 ↗
15. [15] Mia M.N.H., Pervez M.F., Hossain M.K., et al., Results Phys., 7 (2017), 2683-2691.10.1016/j.rinp.2017.07.04710.1016/j.rinp.2017.07.047 ↗
16. [16] Huang B., Chu H.L., Wang M.C., Liu C., Hwang W.S., Zhao X., Ceram. Int., 42,(2016), 17843-17852.10.1016/j.ceramint.2016.08.11810.1016/j.ceramint.2016.08.118 ↗
17. [17] Dahnoun M., Attaf A., Saidi H., Yahia A., Khelifi C., Optik (Stuttg), 134 (2017), 53-59.10.1016/j.ijleo.2017.01.01410.1016/j.ijleo.2017.01.014 ↗
18. [18] Khan M.I., Bhatti K.A., Qindeel R., Alonizan N., Althobaiti H.S., Results Phys., 7 (2017), 651-655.10.1016/j.rinp.2016.12.02910.1016/j.rinp.2016.12.029 ↗
19. [19] Patil N.B., Nimbalkar A.R., Patil M.G., Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., 227 (2018), 53-60.10.1016/j.mseb.2017.10.01110.1016/j.mseb.2017.10.011 ↗
20. [20] Chavan A., Shivaraj B.W., Murthy H.N.N., et al., Procedia Mater. Sci., 10 (2015), 270-278.10.1016/j.mspro.2015.06.05010.1016/j.mspro.2015.06.050 ↗
21. [21] Alahmed Z.A., Albrithen H.A., Al-Ghamdi A.A., Yakuphanoğlu F., Optik (Stuttg), 126 (2015), 575-577.10.1016/j.ijleo.2015.01.00510.1016/j.ijleo.2015.01.005 ↗
22. [22] Turgut G., Tatar D., Optik (Stuttg), 145 (2017), 292-303.10.1016/j.ijleo.2017.07.05510.1016/j.ijleo.2017.07.055 ↗
23. [23] Aydemir S., Köse S., Selami Kiliçkaya M., Özkan V., Superlattices Microstruct., 71 (2014), 72-81.10.1016/j.spmi.2014.03.01010.1016/j.spmi.2014.03.010 ↗
24. [24] Yahia I.S., Salem G.F., Iqbal J., Yakuphananoğlu F., Phys. B Condens. Matter, 511 (2017), 54-60.10.1016/j.physb.2017.01.03010.1016/j.physb.2017.01.030 ↗
25. [25] Kakani S.L., Kakani A., Material Science, New Age International, Bhilwara, 2004.
26. [26] Jule L.T., Dejene F.B., Ali A.G., et al., J. Alloys Compd., 687,2016,920-926.10.1016/j.jallcom.2016.06.17610.1016/j.jallcom.2016.06.176 ↗
27. [27] Yakuphanoğlu F., J. Alloys Compd., 507 (2010), 184-189.10.1016/j.jallcom.2010.07.15110.1016/j.jallcom.2010.07.151 ↗
28. [28] Reddy C.V., Babu B., Shim J., J.Phys. Chem. Solids, 112 (2018), 20-28.10.1016/j.jpcs.2017.09.00310.1016/j.jpcs.2017.09.003 ↗