journal article·2026-04-13Open access

Wear and Corrosion Resistance of HVOF-Sprayed CoCrNi Medium Entropy Alloy Coatings

Yueming WANG, Ting XIA, Lu XIE

Abstract

CoCrNi medium entropy alloy (MEA) coatings were prepared by high velocity oxy-fuel (HVOF) spraying. The microstructures, wear resistance in a wide temperature range, corrosion resistance in NaCl and NaOH solutions of the MEA coatings were systematically studied by SEM, XRD, friction experiment, and electrochemical corrosion test. The microstructure of HVOF coatings was uniform with FCC single-phase solid solution. As the friction temperature increased from room temperature to 200 ℃, 400 ℃, and 600 ℃, the friction coefficients, wear track depth and width, and wear volume loss of the coatings gradually decreased. And these parameters of CoCrNi coating at 600 ℃ are about 0.50 ± 0.1, (140 ± 8) μm, (2.10 ± 0.1) mm, (0.0234 ± 0.0001) g, respectively. Abrasive wear, fatigue wear and plastic deformation were the main wear mechanisms of CoCrNi coatings during the wear test at room temperature. And oxidation wear became the main wear mechanism of CoCrNi coating during the wear test at 400 ℃ and 600 ℃. Ecorr and Icorr of the CoCrNi coatings in NaCl solution were approximately (-0.217 ± 0.01) mV and (0.26 ± 0.08) μA/cm2, respectively. Ecorr and Icorr of CoCrNi coatings in NaOH solution were approximately (-0.282 ± 0.02) and (0.04 ± 0.01) μA/cm2, respectively. And the corrosion resistance of CoCrNi coatings were more superior than 45 carbon steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Diverse Musicological Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.