journal article·2007-06-11Open access

The Optimization of the Isothermal Transformation Dwell with Emphasis on the Matrix Structural Mixture of Austempered Ductile Iron

Author

Materials Science· Volume 13· Issue 2

Abstract

The studied austempered ductile iron (ADI) was obtained by the heat treatment of an unalloyed nodular cast ironconsisting of austenitization (900 °C / 1h), an isothermal transformation at 380 °C and water cooling at the end. To studymatrix composition changes during the isothermal transformation, the dwell at the transformation temperature waschosen in very wide range of 2 min to 540 min. The isothermal transformation starts by a creation of bainitic ferriteneedles resulting in an enrichment of the non-transformed austenite by carbon which increases its stability. For shortdwells (2, 5 and 10 min) the stabilization of the austenite is not sufficient yet, therefore the partial martensitictransformation during cooling occurs. With increasing dwell the amount of the stabilized austenite increases and reachesits maximum for the transformation dwell of 60 min. With further dwell lengthening the amount of the stabilizedaustenite decreases again as a consequence of its continuing transformation into the bainitic ferrite. The maximumfraction of the bainitic ferrite is reached for the longest dwells, i.e. for 270 min and 540 min. For the same dwells ironcarbides on the austenite/bainitic ferrite interface have been found.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.