journal article·2008-03-11Open access

Cu-Al-O system: Catalytic Coatings Obtained by the Activated Thermo-Chemical Condensate Deposition Method

Author

Materials Science· Volume 14· Issue 1

Abstract

Cu-Al-O type catalytic coatings of controlled thickness were obtained by the activated thermo-chemical condensatedeposition method (AT-CCD), without formation of metal underlayer, straight on the strip steel OC-404 of 40 μmthickness, which temperature did not exceed 250 °C during coating formation.After thermal treatment, following investigations of the system “coating-substrate” were made: adhesion, resistanceto chemical effect in acids, phase composition, size of crystallites, morphology and elemental composition of thesurface.Given catalyst assessment temperature up to 275 °C, relatively small gas flows Qgas = 0.5 l/min and large oxygenamount O2 = 20 %, the catalyst (CO oxidation) begins to operate at T5 = 75 °C, reaches 50 % conversation atT50 = 140 °C, and maximum conversion is obtained at 250 °C.Given catalyst assessment temperature up to 600 °C, relatively big gas flows Qgas = 2.75 l/min and small oxygenamount O2 = 0.2 %, the catalyst begins to operate at T5 = 220 °C, reaches 50 % conversation at T50 = 300 °C. Maximumconversion – CO = 92 % and NOx = 100 % – is obtained at 400 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Copper-based nanomaterials and applications · High-Temperature Coating Behaviors · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.