Enhanced through-plane thermal conductivity and mechanical properties of vertically aligned graphene nanoplatelet@graphite flakes reinforced aluminum composites
Source abstract
Abstract
Abstract Graphite flakes reinforced aluminum matrix (Gr/Al) composites with high thermal conductivity, low thermal expansion and low bulk density have been widely studied. However, the application of Gr/Al composites has been limited due to the low through-plane thermal conductivity as well as poor mechanical properties. In this work, the vertically aligned graphene nanoplatelet (GNP) was initially grown on the surfaces of Gr flakes (Gr(GNP)) by chemical vapor deposition (CVD), and then the Gr(GNP)/Al composites were consolidated by vacuum hot-pressing technique. By this way, the through-plane thermal conductivity and mechanical strength are jointly enhanced. With GNP content increases up to 3.3 vol%, the through-plane thermal conductivity can be improved by 96.8% due to the establishment of through-plane heat-conducting channels. Meanwhile, because of the strengthening effect of GNP on the interface region, the flexural strength can be strongly enhanced by 122%. However, with the further increase of GNP content, the through-plane thermal conductivity and flexural strength begin to decline due to the agglomeration of GNP, but are still higher than that of Gr/Al composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Investigation of thermal management materials for automotive electronic control units10.1016/j.applthermaleng.2010.09.023 ↗
2. Large-area freestanding graphene paper for superior thermal management10.1002/adma.201400951 ↗
3. The chips are down for Moore's law10.1038/530144a ↗
4. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
5. Continuous carbon nanotube–ultrathin graphite hybrid foams for increased thermal conductivity and suppressed subcooling in composite phase change materials10.1021/acsnano.5b02917 ↗
6. Fabrication and thermal conductivity of copper coated graphite film/aluminum composites for effective thermal management10.1016/j.jallcom.2017.03.233 ↗
7. Effects of diamond particle size on the formation of copper matrix and the thermal transport properties in electrodeposited copper-diamond composite materials10.1016/j.jallcom.2019.03.347 ↗
8. Investigation into thermal expansion coefficient, thermal conductivity and thermal stability of Al-graphite composite prepared by powder metallurgy10.1016/j.jallcom.2018.09.225 ↗
9. Microstructure of Cu-diamond composites with near-perfect interfaces prepared via electroplating and its thermal properties10.1016/j.matchar.2019.02.018 ↗
10. Metal matrix composites – from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
11. Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites10.1063/1.3553870 ↗
12. Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes10.1016/j.matchar.2017.12.032 ↗
13. Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites10.1016/j.matchar.2013.09.006 ↗
14. Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: dispersion, microstructure, stability, and strengthening10.1016/j.matchar.2017.08.009 ↗
15. Thermal properties of aluminum–graphite composites by powder metallurgy10.1016/j.compositesb.2012.01.083 ↗
16. Preparation of graphite flakes/Al with preferred orientation and high thermal conductivity by squeeze casting10.1016/j.carbon.2015.08.063 ↗
17. Interfacial characteristic and thermal conductivity of Al/diamond composites produced by gas pressure infiltration in a nitrogen atmosphere10.1016/j.matdes.2015.12.098 ↗
18. Diamond/aluminum composites processed by vacuum hot pressing: microstructure characteristics and thermal properties10.1016/j.diamond.2012.10.008 ↗
19. Enhanced thermal conductivity and stability of diamond/aluminum composite by introduction of carbide interface layer10.1016/j.diamond.2014.04.007 ↗
20. The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution10.1016/j.carbon.2011.12.057 ↗
21. Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites10.1016/j.carbon.2015.10.016 ↗
22. Microstructure and mechanical characterization of Al6061-CNT nanocomposites fabricated by spark plasma sintering10.1016/j.matchar.2017.09.028 ↗
23. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
24. Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying10.1016/j.jallcom.2014.01.225 ↗
25. Synthesis and properties of bulk graphene nanoplatelets consolidated by spark plasma sintering10.1016/j.carbon.2012.04.054 ↗
26. Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications10.1016/j.matdes.2014.07.009 ↗
27. Thermal management material: graphite10.1002/adem.201300418 ↗
28. Thermal conductivity and mechanical properties of flake graphite/Al composite with a SiC nano-layer on graphite surface10.1016/j.matdes.2016.06.122 ↗
29. The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites10.1016/j.physleta.2014.10.048 ↗
30. Enhancement of through-thickness thermal conductivity in adhesively bonded joints using aligned carbon nanotubes10.1016/j.compscitech.2007.09.016 ↗
31. Improving thermal conductivity in the through-thickness direction of carbon fibre/SiC composites by growing vertically aligned carbon nanotubes10.1016/j.carbon.2017.01.103 ↗
32. Enhancement of cross-plane thermal conductivity and mechanical strength via vertical aligned carbon nanotube@graphite architecture10.1016/j.carbon.2016.04.001 ↗
33. Facile growth of vertically-aligned graphene nanosheets via thermal CVD: the experimental and theoretical investigations10.1016/j.carbon.2017.05.074 ↗
34. Vertically aligned graphene nanosheet arrays: synthesis, properties and applications in electrochemical energy conversion and storage10.1002/aenm.201700678 ↗
35. Carbon nanotubes grown on graphite films as effective interface enhancement for an aluminum matrix laminated composite in thermal management applications10.1021/acsami.8b12691 ↗
36. Facile synthesis and characterization of graphene nanosheets10.1021/jp710931h ↗
37. Metal-catalyzed crystallization of amorphous carbon to graphene10.1063/1.3318263 ↗
38. Polyaniline-graphene based alpha-amylase biosensor with a linear dynamic range in excess of 6 orders of magnitude10.1016/j.bios.2016.05.034 ↗
39. Graphene nanoflakes reinforced Al-20Si matrix composites prepared by pressure infiltration method10.1016/j.msea.2017.06.027 ↗