journal article·2019-07

RESET current optimization for phase change memory based on the sub-threshold slope

Lei Wu, Yi-Feng Chen, Dao-Lin Cai, Yao-Yao Lu, Tian-qi Guo, Yuan-Guang Liu, Xin Chen, Si-Fan Zhang, Shuai Yan, Yang Li, Zhi-Tang Song

Publisher page

Abstract

Abstract The RESET current (Irst) is a key parameter to characterize power consumption and reliability of phase change memory (PCM) device. And the Optimization of Irst is a classic issue in the investigation of PCM targeting to meet various demands. In this paper, a RESET current optimization method, based on the relationship between the RESET current and the sub-threshold slope (STS), has been presented. Different from the conventional way which uses resistance values and bit yields, the new method that adopting the STS extracted from the V–I characteristics is simple, efficient and non-destructive. Here, the experimental results collected from sample cells of a PCM array confirm that the STS can be an important indicator for RESET current optimization. Furthermore, the voltage stress and endurance performance of the PCM devices operated by different RESET current are also measured, which further prove that the optimal RESET current determined by the new method is beneficial for both power consumption and reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase-change materials and chalcogenides · Advanced Memory and Neural Computing · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Phase change memory technology
2. Phase change memory10.1109/JPROC.2010.2070050 ↗
3. Reduction of RESET current in phase change memory devices by carbon doping in GeSbTe films10.1063/1.4914909 ↗
4. One order of magnitude faster phase change at reduced power in Ti-Sb-Te10.1038/ncomms5086 ↗
5. RESET distribution improvement of phase change memory: the impact of pre-programming10.1109/LED.2014.2308909 ↗
6. Energy-efficient phase-change memory with graphene as a thermal barrier10.1021/acs.nanolett.5b02661 ↗
7. Understanding overreset transition in phase-change memory characteristics10.1109/LED.2012.2202368 ↗
8. A. Calderoni, M. Ferro, E. Varesi, P. Fantini, M. Rizzi, D. Ielmini, Investigation of over-reset programming in phase change memory, in: Proceedings of the 2012 4th IEEE Int. Mem. Work. IMW 2012. 2012, pp 2–5. 〈https://doi.org/10.1109/IMW.2012.6213675〉.10.1109/IMW.2012.6213675 ↗
9. Analytical model for subthreshold conduction and threshold switching in chalcogenide-based memory devices10.1063/1.2773688 ↗
10. Physics-based analytical model of chalcogenide-based memories for array simulation
11. Evidence for trap-limited transport in the subthreshold conduction regime of chalcogenide glasses10.1063/1.2737137 ↗
12. J. Chen, R.G.D. Jeyasingh, B. Gao, Y. Lu, Y.X. Deng, X.Y. Liu, J.F. Kang, H.S. Philip Wong, Scaling behavior of PCM cells in off-state conduction, in: Proceedings of the Int. Symp. VLSI Technol. Syst. Appl. Proc. 2012, pp. 3–4. 〈https://doi.org/10.1109/VLSI-TSA.2012.6210123〉.10.1109/VLSI-TSA.2012.6210123 ↗
13. R.G.D. Jeyasingh, D. Kuzum, H.S.P. Wong, Direct measurement of trap spacing in phase change memory cells using ATE devices, in: Proceedings of the 2011 3rd IEEE Int. Mem. Work. IMW 2011. 2011. 〈https://doi.org/10.1109/IMW.2011.5873228〉.10.1109/IMW.2011.5873228 ↗
14. Investigation of trap spacing for the amorphous state of phase-change memory devices10.1109/TED.2011.2169798 ↗
15. Reliability study of phase-change nonvolatile memories10.1109/TDMR.2004.836724 ↗