journal article·2022-10

Enhancement of the conversion efficiency of selective emitter PERC solar cells by post-oxidation

Rui Tong, Hui Zheng, Sheng Ma, Dongming Liu, Changtong Xu, Weipeng Zhang, Xiaofeng Liu

Publisher page

Abstract

Thermal oxidation has been widely adopted in the fabrication process of silicon solar cells. In this paper, we investigate the effect of thermal oxidation on the performance of passivated emitter and rear cells (PERC) after the diffusion process. It is found that the application of a diffusion furnace for post-oxidation results in the re-doping of phosphorus, which affects the minority carrier lifetime and implied V oc . In comparison, the use of an annealing furnace for post-oxidation brings an improvement of electrical properties of solar cells because of the gettering effect. Furthermore, the increase in thickness of the oxide layer mitigates the laser-induced damage during the laser doping process, which is beneficial for the enhancement of cell efficiency. Batch data shows that post-oxidation using an annealing furnace leads to an absolute efficiency improvement by 0.1%.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. 22.13% Efficient industrial p-type mono PERC solar cell
2. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
3. Optimization of phosphorus dopant profile of industrial p-type mono PERC solar cells10.1016/j.solmat.2018.10.002 ↗
4. Application of SiOxNy films in industrial bifacial PERC solar cells10.1016/j.solmat.2021.111199 ↗
5. Improving the performance of PERC silicon solar cells by optimizing the surface inverted pyramid structure on large-area mono-crystalline silicon wafers10.1016/j.mssp.2021.106281 ↗
6. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
7. Emitter profile tailoring to contact homogeneous high sheet resistance emitter10.1016/j.egypro.2012.07.089 ↗
8. Laser etch back process to fabricate highly efficient selective emitter c-Si solar cells10.1016/j.solener.2014.08.022 ↗
9. Advanced passivation of laser-doped and grooved solar cells10.1016/j.solmat.2019.01.025 ↗
10. Experimental and analytical study of saturation current density of laser-doped phosphorus emitters for silicon solar cells10.1016/j.solmat.2011.03.001 ↗
11. Ion implanted crystalline silicon solar cells with blanket and selective emitter10.1016/j.mseb.2011.07.024 ↗
12. Evaluation of implantation annealing for highly-doped selective boron emitters suitable for screen-printed contacts10.1016/j.solmat.2013.06.040 ↗
13. Effect of porous Si and an etch-back process on the performance of a selective emitter solar cell10.1016/j.solmat.2012.10.009 ↗
14. Enhanced absorption and short circuit current density of selective emitter solar cell using double textured structure10.1016/j.solener.2015.04.010 ↗
15. Efficiency enhancement of i-PERC solar cells by implementation of a laser doped selective emitter10.1016/j.solmat.2014.11.028 ↗
16. Selective emitter by laser doping from phosphosilicate glass
17. Relationships between diffusion parameters and phosphorus precipitation during the POCl3 diffusion process10.1016/j.egypro.2013.07.275 ↗
18. Structure and composition of phosphosilicate glass systems formed by POCl3 diffusion10.1016/j.egypro.2017.09.280 ↗
19. Influence of laser damage on the performance of selective emitter solar cell fabricated using laser doping process10.1016/j.solmat.2014.08.021 ↗
20. Investigation of ablation mechanisms for selective laser ablation of silicon nitride layers10.1016/j.egypro.2011.06.188 ↗
21. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
22. Effective passivation of the low resistivity silicon surface by a rapid thermal oxide/plasma silicon nitride stack10.1063/1.121211 ↗
23. Effect of rapid thermal oxidation on structure and photoelectronic properties of silicon oxide in monocrystalline silicon solar cells10.1016/j.cap.2014.02.017 ↗
24. Effect of surface passivation by a low pressure and temperature environment-grown thermal oxide layer for multi-crystalline silicon solar cells10.1016/j.tsf.2018.05.047 ↗
25. Study of the properties of SiOx layers prepared by different techniques for rear side passivation in TOPCon solar cells
26. Industrial TOPCon solar cells on n-type quasi-mono Si wafers with efficiencies above 23%,10.1016/j.solmat.2020.110690 ↗
27. Effect of diffusion parameters on emitter formation in silicon solar cells by proximity rapid thermal diffusion10.1016/j.mssp.2017.12.006 ↗
28. The impact of diffusion gettering on solar cell efficiency and light induced degradation10.1016/j.ijleo.2018.12.021 ↗
29. Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells10.1016/j.solmat.2020.110462 ↗
30. Hydrogen passivation of defects in crystalline silicon solar cells
31. Oxidation drive-in to improve industrial emitter performance by POCl3 diffusion10.1109/JPHOTOV.2016.2631300 ↗
32. Recovery of minority carrier lifetime in low-cost multicrystalline silicon10.1016/S0927-0248(01)00117-9 ↗
33. Thermal transport properties of gold-covered thin-film silicon dioxide10.1109/TCAPT.2003.811467 ↗
34. Thermal conductivity of ultra low-k dielectrics10.1016/S0167-9317(03)00417-9 ↗
35. Thermal conductivity of silicon at elevated temperature: role of four-phonon scattering and electronic heat conduction10.1016/j.ijheatmasstransfer.2020.120165 ↗
36. Bifacial n-type silicon solar cells with selective front surface field and rear emitter10.1016/j.solmat.2019.110345 ↗
37. Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking10.1016/j.solmat.2017.06.023 ↗
38. Simulation study of light-induced, current-induced degradation and recovery on PERC solar cells10.1016/j.egypro.2016.07.014 ↗