journal article·2016-12

Study on nano-pores enlargement during Ag-assisted electroless etching of diamond wire sawn polycrystalline silicon wafers

Yu-Chao Niu, Hsing-Tsun Liu, Xiang-Ju Liu, Yan-Sen Jiang, Xian-Kun Ren, Pei Cai, Tong-Guang Zhai

Publisher page

Abstract

Abstract In this paper, diamond wire sawn (DWS) mc-Si wafers were textured using Ag-assisted electroless etching (AgNO 3 +HF+H 2 O 2 ) combined with an auxiliary etching (HF+HNO 3 ). The evolution mechanism of the surface texture structure on the wafers was investigated in detail. It was noted that during the AgNO 3 +HF+H 2 O 2 etching, there existed the difference in the axial direction and the depth of nano-pores among different grains. This difference made the different grains form different texture structures during the following HF+HNO 3 etching. Since the etching of poly-silicon is isotropic in HF+HNO 3 solution, it was the AgNO 3 +HF+H 2 O 2 etching rather than the auxiliary etching (HF+HNO 3 ) that resulted in the different texture structure among different grains. During the HF+HNO 3 etching, the diameter of the etched pits on the wafer surface was enlarged quickly through the adjacent pits combination. The depth of the etched pits hardly increased because the top and bottom of pits were etched at the same time. As a result, the ratio of depth to diameter of the pits decreased. The texture difference among the grains and decrease of the ratio of depth to diameter of the pits limited the further enhancement of the PV efficiency of mc-Si solar cell. Therefore, the improving the uniformity of AgNO 3 +HF+H 2 O 2 etching for the different crystal orientation grains and obtaining a large ratio of depth to diameter of the pits during the HF+HNO 3 etching are two critical issues to enhance the PV efficiency of mc-Si solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
2. On the nature and removal of saw marks on diamond wire sawn multicrystalline silicon wafers10.1016/j.mssp.2014.06.049 ↗
3. Wire saw process-induced surface damage characterization10.1007/s13369-012-0532-7 ↗
4. Mechanical behavior of diamond-sawn multi-crystalline silicon wafers and its improvement10.1007/s12633-013-9170-2 ↗
5. Textural development of SiC and diamond wire sawed sc-silicon wafer10.1016/j.egypro.2012.07.072 ↗
6. Texturing of SiC-slurry and diamond wire sawn silicon wafers by HF–HNO3–H2SO4 mixtures10.1016/j.solmat.2014.04.006 ↗
7. Comparison of diamond wire cut and silicon carbide slurry processed silicon wafer surfaces after acidic texturisation10.1016/j.mssp.2014.03.046 ↗
8. Texturization using metalcatalyst wet chemical etching for multicrystalline diamond wire sawn wafer10.1016/j.solmat.2014.11.008 ↗
9. Next-generation multi-crystalline silicon solar cells: Diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
10. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
11. K. Shirasawa, K. Fukui, K. Okada, Y. Inomata, H. Takahashi, Y. Fukawa, S. Fujii, Over 17% large area multicrystalline silicon solar cells, in: Proceedings of the Fourteenth European Photovoltaic Solar Energy Conferences Barcelona, Spain, 1997, pp. 384–387.
12. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
13. Determination of the impact of the wire velocity on the surface damage of diamond wire sawn silicon wafers10.1016/j.egypro.2015.07.124 ↗
14. Novel texturing process for diamond-wire-sawn single-crystalline silicon solar cell10.1016/j.solmat.2014.11.016 ↗
15. Etch stop of silicon surface induced by tribo-nanolithography10.1088/0957-4484/16/8/073 ↗
16. Mitsubishi electric corporation have the patent for method of manufacturing solar cell); Patent No. JP4610669, CN101573801, EP2182556, KR20090087113, US2010029034 (USA).
17. High-efficiency 6″ multicrystalline black solar cells based on metal-nanoparticle-assisted chemical etching
18. Fabrication and characteristics of black silicon for solar cell applications: an overview10.1016/j.mssp.2014.02.005 ↗
19. White light emitting silicon nano-crystals-polymeric hybrid films prepared by single batch solution based method10.1016/j.tsf.2016.02.013 ↗
20. Laser induced deposition of nanocrystalline Si with preferred crystallographic orientation10.1016/0169-4332(94)00435-8 ↗
21. Formation mechanism of porous silicon nanowires in HF/AgNO3 solution10.1016/j.micromeso.2013.11.048 ↗
22. Electroless chemical etching of silicon in aqueous NH4F/AgNO3/HNO3 Solution10.1016/j.apsusc.2013.08.033 ↗