Fabrication of nanoscale metallic air-bridges by introducing a SiO2 sacrificial layer
Source abstract
Abstract
A new method to fabricate nanoscale metallic air-bridges has been investigated. The pillar patterns of the air-bridge were defined on a SiO2, sacrificial layer by electron-beam lithography combined with inductively coupled plasma etching. Thereafter, the span (suspended part between the pillars) patterns were defined with a second electron-beam exposure on a PMMA/PMMA-MAA resist system. The fabrication process was completed by subsequent metal electron-beam evaporation, lift-off in acetone, and removal of the sacrificial layer in a buffered hydrofluoric (HF) solution. Air-bridges with two different geometries (line-shaped and cross-shaped) were studied in detail. The narrowest width of the air-bridges was around 200 nm, and the typical length of the air-bridges was 2-5 mu m. The advantages of our method are the simplicity of carrying out electron-beam exposure with good reproducibility and the capability of more accurate control of the pillar sizes and shapes of the air-bridge. (C) 2007 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Photonic Crystals and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Low-stiffness silicon cantilevers with integrated heaters and piezoresistive sensors for high-density AFM thermomechanical data storage10.1109/84.661386 ↗
2. Modeling and control of piezoelectric cantilever beam micro-mirror and micro-laser array to reduce image banding in electrophotographic processes10.1088/0960-1317/11/5/307 ↗
3. Amorphous silicon air-gap resonators on large-area substrates10.1063/1.1306912 ↗
4. Micromechanical membrane switch on silicon10.1147/rd.234.0376 ↗
5. Mollah MN, Karmakar NC. RF-MEMS switches: paradigms of microwave switching. Microwave conference, 2001. APMC 2001, 2001 Asia-Pacific, 3, 2001. p. 1024–7.10.1109/APMC.2001.985292 ↗
6. Wang C, Ramadoss R, Lee S, Gupta KC, Bright VM, Lee YC. Flexible-circuit based RF MEMS switches. In: Proceedings of the 2001 ASME international mechanical engineering congress & exposition, New York, 2001. p. 246.10.1115/IMECE2001/MEMS-23907 ↗
7. Investigations into RF MEMS switches for reconfigurable phased antenna arrays10.1109/APS.2002.1016018 ↗
8. A new type of high bandwidth RF MEMS Switch-Toggle Switch
9. Uniplanar MMIC's and their applications10.1109/22.17430 ↗
10. 3D characterization of air-bridges and via holes in conductor-backed coplanar waveguides for MMIC applications10.1109/MWSYM.1993.277006 ↗
11. Vasilache D, Iordanescu S, Avramescu V, Petrini I, Rizescu R, Müller A. Air-bridges and planar inductors for MMICs. In: IEEE international semiconductor conference, CAS ‘98 proceeding, 2, 1998. p. 609–12.10.1109/SMICND.1998.733823 ↗
12. A new MMIC broadside coupler using an array of air-bridges for directivity enhancement10.1109/LMWC.2004.824814 ↗
13. Parallel quantum point contacts fabricated with independently biased gates and a submicrometer airbridge post10.1063/1.112731 ↗
14. Electrically injected quantum-dot photonic crystal microcavity light-emitting arrays with air-bridge contacts10.1109/LPT.2006.887789 ↗
15. Coherence and phase sensitive measurements in a quantum dot10.1103/PhysRevLett.74.4047 ↗
16. Submicron air-bridge interconnection process for complex gate geometries10.1116/1.589361 ↗
17. Fabrication of metallic air-bridges using multiple-dose electron beam lithography10.1063/1.2204833 ↗
18. Metallic air-bridges fabricated by multiple accelerated voltage electron beam lithography10.1016/j.mee.2004.05.005 ↗
19. Building and testing submicrometer metallic (gold) air-bridges for nanotransport applications10.1016/j.mee.2004.12.050 ↗