Chemical mechanical polishing exploiting metal electrochemical corrosion of single-crystal SiC
Source abstract
Abstract
A chemical mechanical polishing (CMP) method of single-crystal SiC is proposed based on metal electrochemical corrosion. The oxidation mechanism of SiC by electrochemical corrosion of metals and the mechanism of surface material removal are revealed by corrosion and polishing experiments. The metallic aluminum sheet that is in contact with single-crystal SiC was immersed in sodium sulfate (Na 2SO 4 ) electrolyte solution, and the morphological and elemental changes of single-crystal SiC surface were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). Then, polishing experiments were conducted on single-crystal SiC using different metal polishing discs and different polishing solutions. The XPS and EDS results show that single-crystal SiC can electrochemically corrode to generate a silica reaction layer. The use of metal polishing discs in CMP significantly improved the material removal rate (MRR) of SiC, with the highest MRR of 1011.43 nm/h for aluminum polishing discs, followed by that for iron polishing discs, and the lowest MRR for copper and alumina ceramic polishing discs. When metal polishing discs were used, the addition of electrolyte solution significantly improved the MRR and reduced the surface roughness of the SiC surface. Polishing with Na 2SO 4 solution when the polishing disc was aluminum disc, the MRR was higher than that for using deionized water by 105%, and the surface roughness Ra decreased by 37.8% to 2.8 nm. The metal electrochemical corrosion reaction can promote the oxidation of single-crystal SiC and generate a soft SiO 2 reaction layer on the SiC surface, thereby improving the polishing efficiency of single-crystal SiC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Semiconductor materials and devices · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Advances in Si and SiC materials for high-performance supercapacitors toward integrated energy storage systems10.1002/smll.202101775 ↗
2. Investigation of SiC single crystal polishing by combination of anodic oxidation and mechanical polishing10.20964/2020.05.66 ↗
3. Accelerated C-face polishing of silicon carbide by alkaline polishing slurries with Fe3O4 catalysts10.1016/j.jece.2021.106863 ↗
4. A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization10.1557/s43578-020-00060-x ↗
5. Novel abrasive-free planarization of 4H-SiC (0001) using catalyst10.1007/s11664-006-0218-6 ↗
6. Study on the mechanism of solid-phase oxidant action in tribochemical mechanical polishing of SiC single crystal substrate10.3390/mi12121547 ↗
7. A review: green chemical mechanical polishing for metals and brittle wafers10.1088/1361-6463/ac0c4a ↗
8. Planarization of c-face 4H-SiC substrate using fe particles and hydrogen peroxide solution
9. Surface finishing of single-crystal SiC and GaN wafers using a magnetic tool in H2O2 solution10.20965/ijat.2019.p0230 ↗
10. The influence of concentration of hydroxyl radical on the chemical mechanical polishing of SiC wafer based on the fenton reaction
11. Material removal process of single-crystal SiC in chemical-magnetorheological compound finishing10.1007/s00170-017-1098-z ↗
12. Material removal mechanisms in chemical-magnetorheological compound finishing10.1007/s00170-019-03594-5 ↗
13. Basic research on chemical mechanical polishing of single-crystal SiC-Electro-Fenton: reaction mechanism and modelling of hydroxyl radical generation using condition response modelling10.1016/j.jece.2020.104954 ↗
14. Enhancement mechanism of chemical mechanical polishing for single-crystal 6H-SiC based on Electro-Fenton reaction10.1016/j.diamond.2020.108147 ↗
15. A novel approach to obtain near damage-free surface/subsurface in machining of single crystal 4H-SiC substrate using pure metal mediated friction10.1016/j.apsusc.2022.152963 ↗
16. A study on surface polishing of SiC with a tribochemical reaction mechanism10.1007/s00170-003-1873-x ↗
17. Standard electrode potential, tafel equation, and the solvation thermodynamics10.1063/1.3152847 ↗
18. A low-cost and dendrite-free rechargeable aluminium-ion battery with superior performance
19. Zoski · 2007 · 813
20. Characterization of β‐SiC surfaces and the Au/SiC interface10.1116/1.573958 ↗
21. Reactive and nonreactive ion mixing of Ti films on carbon substrates10.1116/1.574992 ↗
22. XPS studies on SiOx thin films10.1016/0169-4332(93)90431-A ↗
23. Watts · 2003 · 10
24. XPS analysis of the interface of ceramic thin films for humidity sensors10.1016/0169-4332(93)90459-O ↗
25. Characterization of coprecipitated nickel on silica methanation catalysts by X-ray photoelectron spectroscopy10.1016/0021-9517(79)90126-X ↗
26. Formation of nickel, cobalt, copper, and iron aluminates from α- and γ-alumina-supported oxides: a comparative study10.1006/jssc.1997.7590 ↗
27. Compositional and structural analysis of aluminum oxide films prepared by plasma-enhanced chemical vapor deposition10.1016/0040-6090(94)90238-0 ↗
28. Raman spectra of quartz and PD4+-Doped SiO2 crystals at different temperature and pressure10.3390/cryst9110569 ↗
29. Tribochemical polishing10.1146/annurev.matsci.30.1.27 ↗
30. Formation of periodic microbump arrays by metal-assisted photodissolution of InP10.1143/JJAP.49.046505 ↗
31. Catalyst and processing effects on metal-assisted chemical etching for the production of highly porous GaN10.1088/0268-1242/28/6/065001 ↗
32. HölzlF · 1979 · vol. 85 · 1
33. The roles of fluid hydrodynamics, mass transfer, rust layer and macro-cell current on flow accelerated corrosion of carbon steel in oxygen containing electrolyte10.1149/1945-7111/abc6c8 ↗
34. Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al-Cu in neutral aqueous solutions10.1016/S0010-938X(98)00145-0 ↗
35. Investigation of anodic oxidation mechanism of 4H-SiC (0001) for electrochemical mechanical polishing10.1016/j.electacta.2018.03.184 ↗
36. A review on precision polishing technology of single-crystal SiC10.3390/cryst12010101 ↗
37. Investigation into a novel pulsating cavitation air jet polishing method for Ti-6Al-4V alloy10.1016/j.triboint.2022.107837 ↗
38. Marinescu · 2003 · 282
39. UV-TiO2 photocatalysis-assisted chemical mechanical polishing 4H-SiC wafer10.1080/10426914.2017.1364855 ↗
40. The mechanism of Fenton reaction of hydrogen peroxide with single crystal 6H-SiC substrate