Current density and thickness dependent anisotropic thermal conductivity of electroplated copper thin films
Source abstract
Abstract
Electroplated copper thin films are essential in microelectronics, widely used for back-end interconnects, through-silicon vias, and redistribution layers. Currently, their thermal conductivity is frequently estimated indirectly using the four-point probe method and the Wiedemann-Franz law, with limited research on their anisotropy and influencing factors. In this paper, we report the measurements on the electrical and thermal properties of electroplated copper thin films under different current densities during plating and thicknesses using the four-point probe method and frequency-domain thermoreflectance. The results indicate that current density and film thickness significantly influence the microstructure of the copper thin films, resulting in pronounced anisotropy in thermal conductivity. Scanning electron microscopy and electron backscatter diffraction analyses further reveal the microstructural features responsible for this anisotropy and explain how current density affects the internal structure of electroplated copper films, impacting their thermal conductivity. These insights provide valuable theoretical guidance for designing and optimizing electroplated copper films in electronic applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · Electronic Packaging and Soldering Technologies · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. The evolution of microstructure and resistance in electroplated copper films by linear integrated laser scanning annealing10.1007/s13391-021-00269-w ↗
2. Application of island thin films for microelectronics devices
3. Electroplating nanotwinned copper for ultrafine pitch redistribution layer (RDL) of advanced packaging technology
4. Advanced thin copper electroplating process for HDI microvia filling application, 2013 8th International Microsystems, Packaging
5. Electroplated copper additives for advanced packaging: a review10.1021/acsomega.4c01707 ↗
6. Kandlikar · 2021
7. Heat transfer characteristics analysis and operation status evaluation of silicon-containing chip integrated circuit packaging considering the influence of regulator heat source
8. Thermal diffusivity and thermal conductivity of copper thin films at ambient conditions10.2514/1.T4727 ↗
9. Thermal conductivity of copper films10.1016/0040-6090(74)90033-9 ↗
10. Improvement of thermal conductivity of electroplated copper interconnections by controlling their crystallinity
11. Molecular dynamics simulation to the thermal conductivity of copper thin-film
12. The effect of plating current densities on self-annealing behaviors of electroplated copper films10.1149/1.1500348 ↗
13. Reduction of resistivity of electroplated copper by rapid thermal annealing10.1149/1.1477296 ↗
14. Resistivity of copper films at thicknesses near the mean free path of electrons in copper minimization of the diffuse scattering in copper10.1149/1.1391172 ↗
15. Effect of the crystallinity on the electromigration resistance of electroplated copper thin-film interconnections10.1115/1.4036442 ↗
16. Characterization and morphology of copper powder particles as a function of different electrolytic regimes10.1016/S1452-3981(23)15390-9 ↗
17. Mechanical and structural properties of electrodeposited copper and their relation with the electrodeposition parameters10.1016/j.surfcoat.2004.05.001 ↗
18. Song · 2011
19. Effect of electrodeposition parameters on morphology of copper thin films10.9790/3021-03835561 ↗
20. A microscopic investigation of electrolytic copper powders deposited by reversing currents10.1016/0304-386X(94)90055-8 ↗
21. Evaluation of the crystallinity of grain boundaries of electronic copper thin films for highly reliable interconnections
22. Effects of additives and chelating agents on electroless copper plating10.1016/S0169-4332(01)00306-3 ↗
23. Shape control of electrodeposited copper films and nanostructures through additive effects10.1021/la500001j ↗
24. Synergistic effect of additives on electrodeposition of copper from cyanide-free electrolytes and its structural and morphological characteristics10.1016/S1003-6326(17)60189-4 ↗
25. Crystallographic texture and anisotropy of electrolytic deposited copper coating analysis
26. The grain size and microstructure of jet-electroplated damascene copper films10.1149/1.1846712 ↗
27. A frequency-domain thermoreflectance method for the characterization of thermal properties10.1063/1.3212673 ↗
28. Frequency domain thermoreflectance technique for measuring the thermal conductivity of individual micro-particles10.1063/1.5025173 ↗
29. Accurate measurement of in-plane thermal conductivity of layered materials without metal film transducer using frequency domain thermoreflectance10.1063/5.0003770 ↗
30. Interface density effects on cross-plane thermal conductance of nanolaminate thin films
31. Non‐contact mass density and thermal conductivity measurements of organic thin films using frequency–domain thermoreflectance10.1002/admi.202101404 ↗
32. Characterization of thin metal films via frequency-domain thermoreflectance10.1063/1.3289907 ↗
33. SIMS study of effect of Cr adhesion layer on the thermal stability of silver selenide thin films on Si10.1016/j.nimb.2007.11.029 ↗
34. Influence of interfacial mixing on thermal boundary conductance across a chromium/silicon interface10.1115/1.2897344 ↗
35. Effects of different kinds of seed layers and heat treatment on adhesion characteristics of Cu/(Cr or Ni–Cr)/PI interfaces in flexible printed circuits10.1007/s10854-010-0213-9 ↗
36. Effect of Cr thickness on adhesion strength of Cu/Cr/polyimide flexible copper clad laminate fabricated by roll-to-roll process10.2320/matertrans.M2009276 ↗
37. Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures10.1016/j.ijadhadh.2012.07.012 ↗
38. Tutorial: time-domain thermoreflectance (TDTR) for thermal property characterization of bulk and thin film materials10.1063/1.5046944 ↗
39. Thermal property microscopy with frequency domain thermoreflectance10.1063/1.4824143 ↗
40. Four-point probe measurements using current probes with voltage feedback to measure electric potentials10.1088/1361-648X/aaa31e ↗
41. Sheet resistance measurements of conductive thin films: a comparison of techniques10.3390/electronics10080960 ↗
42. Accurate microfour-point probe sheet resistance measurements on small samples10.1063/1.3125050 ↗
43. Anisotropy in conductance of a quasi-one-dimensional metallic surface state measured by a square micro-four-point probe method10.1103/PhysRevLett.91.036805 ↗
44. Characterization of semiconductor surface conductivity by using microscopic four-point probe technique10.1016/j.phpro.2012.03.568 ↗
45. Surface-sensitive conductance measurements10.1088/0953-8984/21/1/013003 ↗
46. The Wiedemann-Franz law for electrical and thermal conduction in metals
47. Pulse accumulation, radial heat conduction, and anisotropic thermal conductivity in pump-probe transient thermoreflectance10.1063/1.3006335 ↗
48. Analysis of heat flow in layered structures for time-domain thermoreflectance10.1063/1.1819431 ↗
49. Broad review of four-point probe correction factors: enhanced analytical model using advanced numerical and experimental cross-examination10.1016/j.rinp.2023.106445 ↗
50. Machine learning reconstruction of depth-dependent thermal conductivity profile from pump–probe thermoreflectance signals10.1063/5.0138060 ↗
51. An instrumentation guide to measuring thermal conductivity using frequency domain thermoreflectance (FDTR)10.1063/5.0213738 ↗
52. Uncertainty analysis of thermoreflectance measurements10.1063/1.4939671 ↗
53. Morphology, microstructure, and mechanical properties of a copper electrodeposit10.1016/j.mee.2003.09.012 ↗
54. Evolution of the morphology of electrodeposited copper at the early stage of dendritic growth10.1149/2.087304jes ↗
55. Electrodeposition of metal powders with controlled particle grain size and morphology10.1007/978-1-4615-3022-0_6 ↗
56. In situ observation of the grain growth of the copper electrodeposits for ultralarge scale integration10.1063/1.2364119 ↗
57. Two-step room temperature grain growth in electroplated copper10.1063/1.371272 ↗
58. Studies of the driving force for room-temperature microstructure evolution in electroplated copper films10.1116/1.1788680 ↗
59. Electron backscatter diffraction characterization of microstructure evolution of electroplated copper film10.2320/matertrans.MG200910 ↗
60. Texture of electrodeposited copper coatings as related to their substructure, granular structure and surface morphology10.1155/TSM.34.171 ↗
61. In situ observation of grain growth on electroplated Cu film by electron backscatter diffraction10.1143/JJAP.48.066507 ↗
62. Increase in electrical resistivity of copper and aluminum fine lines10.2320/matertrans.43.1621 ↗
63. Analysis of the size effect in electroplated fine copper wires and a realistic assessment to model copper resistivity10.1063/1.2711385 ↗
64. Effects of current density and deposition time on electrical resistivity of electroplated Cu layers10.1023/B:JMSE.0000043425.91103.da ↗
65. Influence of the electron mean free path on the resistivity of thin metal films10.1016/j.mee.2004.07.041 ↗