journal article·2019-10

Molecular dynamics study on femtosecond laser aided machining of monocrystalline silicon carbide

Binbin Meng, Dandan Yuan, Jian Zheng, Shaolin Xu

Publisher page

Abstract

Abstract To solve SiC machining processes problems such as low processing efficiency, surface/subsurface damage, and machining tool wear, a femtosecond-laser-aided machining process was studied. In this paper, the diamond-machinability and removal mechanism of SiC-modified layer during femtosecond-laser-aided machining process are evaluated at the nanoscale using molecular dynamics. The results show that micro/nano structures in the modified layer significantly influence the material removal process, and SiC surface structures effectively improve the removal efficiency and reduce subsurface damage depth. The surface micro/nano structures introduced by femtosecond laser scanning improve the diamond-machinability of mono-crystalline SiC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. SiC sensors: A review10.1088/0022-3727/40/20/S17 ↗
2. Quantum computing: Diamond and silicon converge10.1038/479047a ↗
3. Oxidation of silicon carbide by O2 and H2O: A ReaxFF reactive molecular dynamics study, Part I10.1021/jp306391p ↗
4. Biocompatibility and wettability of crystalline SiC and Si surfaces
5. Incipient plasticity in 4H-SiC during quasistatic nanoindentation10.1016/j.jmbbm.2013.12.005 ↗
6. Ravindra · 2011 · 312
7. The current understanding on the diamond machining of silicon carbide10.1088/0022-3727/47/24/243001 ↗
8. Grinding of hard and brittle materials10.1016/S0007-8506(07)60748-3 ↗
9. On material removal mechanisms in finishing of advanced ceramics and glasses10.1016/S0007-8506(07)63113-8 ↗
10. Transmission electron microscopy analysis of mechanical polishing-related damage in silicon carbide wafers10.1088/0268-1242/21/12/035 ↗
11. Characterization of polishing-related surface damage in (0001) silicon carbide substrates10.1149/1.2048499 ↗
12. Electro-chemical mechanical polishing of silicon carbide10.1007/s11664-004-0207-6 ↗
13. Electrochemical growth of micrometer-Thick oxide on SiC in acidic fluoride solution10.1021/cm900374s ↗
14. Optimization of the plasma oxidation and abrasive polishing processes in plasma-assisted polishing for highly effective planarization of 4H-SiC10.1016/j.cirp.2014.03.043 ↗
15. Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC10.1016/j.cirp.2015.04.069 ↗
16. Atomic-scale planarization of 4H-SiC (0001) by combination of thermal oxidation and abrasive polishing
17. Application of electrolytic in-process dressing (ELID) grinding and chemical mechanical polishing (CMP) process for emerging hardbrittle materials used in light-emitting diodes10.1016/j.jcrysgro.2011.01.084 ↗
18. Coulomb explosion-induced formation of highly oriented nanoparticles on thin films of 3C-SiC by the femtosecond pulsed laser
19. Alignment of nanoparticles formed on the surface of 6H-SiC crystals irradiated by two collinear femtosecond laser beams
20. Femtosecond laser-induced periodic surface structures10.2351/1.4712658 ↗
21. Growth of high spatial frequency periodic CSs on SiC crystal surfaces irradiated with successive femtosecond laser pulses10.1364/OE.21.026323 ↗
22. Femtosecond pulsed laser ablation of 3C-SiC thin film on silicon10.1007/s00339-003-2103-y ↗
23. Microscopic analysis of carbon phases induced by femtosecond laser irradiation on single-crystal SiC[J]10.1007/s00339-010-5786-x ↗
24. Atomistic modeling of nanoparticle generation in short pulse laser ablation of thin metal films in water10.1016/j.jcis.2016.10.029 ↗
25. Generation of nanocrystalline surface layer in short pulse laser processing of metal targets under conditions of spatial confinement by solid or liquid overlayer10.1016/j.apsusc.2017.02.030 ↗
26. Experimental and computational study of the effect of 1 atm background gas on nanoparticle generation in femtosecond laser ablation of metals
27. Short-pulse laser ablation of solids: From phase explosion to fragmentation10.1103/PhysRevLett.91.225502 ↗
28. Thermodynamic pathways to melting, ablation, and solidification in absorbing solids under pulsed laser irradiation10.1103/PhysRevB.73.134108 ↗
29. Lorazo · 2001 · 1
30. Coulomb explosion-induced formation of highly oriented nanoparticles on thin films of 3C-SiC by the femtosecond pulsed laser
31. Alignment of nanoparticles formed on the surface of 6H-SiC crystals irradiated by two collinear femtosecond laser beams
32. Microscopic analysis of carbon phases induced by femtosecond laser irradiation on single-crystal SiC10.1007/s00339-010-5786-x ↗
33. Repeated nanoscratch and double nanoscratch tests of Lu2O3 transparent ceramics: Material removal and deformation mechanism, and theoretical model of penetration depth
34. Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal
35. Analytical potential for atomistic simulations of silicon, carbon, andsiliconcarbide10.1103/PhysRevB.71.035211 ↗
36. Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide10.1016/j.commatsci.2011.07.052 ↗
37. Atomic-scale characterization of occurring phenomena during hot nanometric cutting of single crystal 3C-SiC10.1039/C6RA05830B ↗
38. Anisotropy of single-crystal 3C-SiC during nanometric cutting10.1088/0965-0393/21/6/065004 ↗
39. Molecular dynamics simulation study of deformation mechanisms in 3C-SiC during nanometric cutting at elevated temperatures10.1016/j.msea.2015.11.100 ↗