journal article·2023-03

A novel approach for ultrafast and highly sensitive carbon monoxide gas sensor based on PEDOT/GO nanocomposite

Maamon A. Farea, Hamed Y. Mohammed, Sumedh M. Shirsat, Meng-Lin Tsai, Mohammad N. Murshed, Mohamed E. El Sayed, Sufyan Naji, Ahmed Samir, Rim M. Alsharabi, Mahendra D. Shirsat

Publisher page

Abstract

An ultrafast and highly sensitive carbon monoxide gas sensor based on PEDOT/GO nanocomposites has been addressed in this work. A new approach was utilized to materialize PEDOT/GO via a straightforward and inexpensive polymerization in the presence of GO. Many characterization techniques, including FE-SEM, AFM, TGA, XRD, FTIR, Raman spectroscopy, and UV–Vis spectroscopy, have been utilized to confirm the successful formation of the PEDOT/GO nanocomposite. Moreover, the chemosensitivity modality has been used to measure the materials’ resistivity and sensing performance. The PEDOT/GO-based sensor exhibits excellent sensitivity when exposed to a wide range of CO concentrations, from 20 ppm to 270 ppm. Our experimental outcomes demonstrated that incorporating PEDOT into GO enhanced the sensor sensitivity (from 16% for pure PEDOT to 44% for composite), which resulted in quick response/recovery times (43 s/42 s) and exceptional long-term stability at room temperature. Based on the results of this work, it seems likely that the proposed sensor, with its low cost, simple development process, and excellent sensing performance, could be a good candidate for real-time CO detection.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Metal-organic frameworks-derived Mn-doped Co3O4 porous nanosheets and enhanced CO sensing performance10.1016/j.snb.2021.130943 ↗
2. Hazardous gases sensors based on conducting polymer composites: Review10.1016/j.cplett.2021.138703 ↗
3. CO sensing properties of Au/SnO2-Co3O4 catalysts on a micro thermoelectric gas sensor10.1016/j.snb.2015.09.146 ↗
4. Carbon monoxide (CO) optical gas sensor based on ZnO thin films10.1016/j.snb.2017.05.064 ↗
5. Potentiometric carbon monoxide sensors using an anion-conducting polymer electrolyte and Au-loaded SnO 2 electrodes10.1149/2.0561607jes ↗
6. Ultrahigh sensitive and selective room-temperature carbon monoxide gas sensor based on polypyrrole/titanium dioxide nanocomposite10.1016/j.jallcom.2022.165397 ↗
7. Selective and sensitive chemiresistive sensors based on polyaniline/graphene oxide nanocomposite: a cost-effective approach
8. Highly sensitive and selective CO gas sensor based on a hydrophobic SnO2/CuO bilayer10.1039/C6RA06538D ↗
9. Selectivity and sensitivity of Pd-loaded and Fe-doped SnO2 sensor for CO detection10.1016/j.snb.2014.04.026 ↗
10. Chemiresistive SO2 sensor: graphene oxide (GO) anchored poly(3,4-ethylenedioxythiophene):poly(4styrenesulfonate) (PEDOT:PSS)10.1007/s00339-020-04053-9 ↗
11. Improvement of the carbon monoxide gas sensing properties of polyaniline in the presence of gold nanoparticles at room temperature10.1016/j.synthmet.2020.116404 ↗
12. Chemo-electrical gas sensors based on conducting polymer hybrids10.3390/polym9050155 ↗
13. Highly sensitive and selective chemiresistor gas/vapor sensors based on polyaniline nanocomposite: a comprehensive review10.1016/j.jsamd.2016.10.005 ↗
14. Selective Hg2+ sensor: rGO-blended PEDOT:PSS conducting polymer OFET10.1007/s00339-021-04314-1 ↗
15. Direct electrochemical reduction of hematite decorated graphene oxide (α-Fe2O3@erGO) nanocomposite for selective detection of Parkinson's disease biomarker10.1016/j.bios.2018.05.024 ↗
16. Hydrothermally synthesized ZnO and Z-rGO nanorods: effect of post-annealing temperature and rGO incorporation on hydrogen sensing10.1007/s10854-021-07439-4 ↗
17. New synthesized ionic liquid functionalized graphene oxide: synthesis, characterization and its nanocomposite with conjugated polymer as effective electrode materials in an energy storage device10.1016/j.electacta.2018.09.177 ↗
18. Incorporation of polyaniline on graphene-related materials for wearable thermoelectric applications10.1016/j.matlet.2021.130576 ↗
19. Preparation and characterization of polyethylenimine functionalized reduced graphene oxide for thermoelectric applications10.1149/2162-8777/ac1e6c ↗
20. Amorphous SnS nanosheets/graphene oxide hybrid with efficient dielectric loss to improve the high-frequency electromagnetic wave absorption properties10.1016/j.apsusc.2019.05.038 ↗
21. Room-temperature methane gas sensing properties based on in situ reduced graphene oxide incorporated with tin dioxide10.1039/C7TA01293D ↗
22. Room-temperature high-performance acetone gas sensor based on hydrothermal synthesized SnO2-reduced graphene oxide hybrid composite10.1039/C4RA10942B ↗
23. Highly sensitive chemiresistive H2S gas sensor based on graphene decorated with Ag nanoparticles and charged impurities10.1016/j.snb.2017.10.128 ↗
24. CO, CO2, and SO2 detection based on functionalized graphene nanoribbons: first principles study
25. Graphene-based hydrogen gas sensors: a review10.3390/pr8050633 ↗
26. Carbon monoxide sensor based on polypyrrole-graphene oxide composite: a cost-effective approach10.1007/s00339-021-04837-7 ↗
27. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
28. Structural characterization of graphite nanoplatelets synthesized from graphite flakes
29. Turbostratic carbon/graphene prepared via the dry ice in flames method and its purification using different routes: a comparative study10.3390/ma15072501 ↗
30. Synthesis and electrochemical sensing application of poly(3,4-ethylenedioxythiophene)-based materials: a review10.1016/j.aca.2018.02.080 ↗
31. Progress in the functional modification of graphene/graphene oxide: a review10.1039/D0RA01068E ↗
32. An investigation on the fabrication of conductive polyethylene dioxythiophene (PEDOT) nanofibers through electrospinning10.1016/j.synthmet.2018.07.013 ↗
33. Poly(N-methyl pyrrole) decorated rGO nanocomposite: a novel ultrasensitive and selective carbon monoxide sensor10.1016/j.cej.2022.136010 ↗
34. Modulation of the doping level of PEDOT:PSS film by treatment with hydrazine to improve the Seebeck coefficient10.1039/C9RA07648D ↗
35. Ultraviolet-visible spectroscopy of graphene oxides10.1063/1.4747817 ↗
36. The structure and properties of PEDOT synthesized by template-free solution method10.1186/1556-276X-9-557 ↗
37. In situ polymerization deposition of porous conducting polymer on reduced graphene oxide for gas sensor10.1021/am5032456 ↗
38. Fabrication of GO/cement composites by incorporation of few-layered GO nanosheets and characterization of their crystal/chemical structure and properties10.3390/nano7120457 ↗
39. Anti-bacterial and anti-fouling capabilities of poly(3,4-ethylenedioxythiophene) derivative nanohybrid coatings on SUS316L stainless steel by electrochemical polymerization10.3390/polym12071467 ↗
40. Controlling covalent chemistry on graphene oxide10.1038/s42254-022-00422-w ↗
41. Fast and clean functionalization of MWCNTs by DBD plasma and its influence on mechanical properties of C-epoxy composites10.1039/C5RA08469E ↗
42. Thermal stability investigation of pedot films from chemical oxidation and prepolymerized dispersion10.5796/electrochemistry.81.801 ↗
43. Wearable carbon monoxide sensors based on hybrid graphene/ZnO nanocomposites10.1109/ACCESS.2020.2976841 ↗
44. CO sensor based on polypyrrole functionalized with iron porphyrin10.1016/j.synthmet.2009.01.018 ↗
45. Polyaniline-multiwalled carbon nanotube (PANI-MWCNT): room temperature resistive carbon monoxide (CO) sensor10.1016/j.synthmet.2018.08.024 ↗
46. Room temperature CO sensing by polyaniline/Co3O4 nanocomposite10.1002/app.44115 ↗
47. Carbon monoxide sensor based on polypyrrole-graphene oxide composite: a cost-effective approach10.1007/s00339-021-04837-7 ↗
48. Enhanced sensitivity of langasite-based surface acoustic wave CO gas sensor using highly porous Ppy@PEDOT:PSS hybrid nanocomposite10.1016/j.snb.2022.131786 ↗
49. The interaction of carbon monoxide to Fe(III)(salen)-PEDOT:PSS composite as a gas sensor10.1016/j.synthmet.2015.04.019 ↗
50. Impact of reduced graphene oxide on the sensing performance of Poly (3, 4-ethylenedioxythiophene) towards highly sensitive and selective CO sensor: a comprehensive study10.1016/j.synthmet.2022.117166 ↗
51. Semiconducting metal oxides as sensors for environmentally hazardous gases10.1016/j.snb.2011.08.032 ↗
52. Boosting of NO2 gas sensing performances using GO-PEDOT:PSS nanocomposite chemical interface coated on langasite-based surface acoustic wave sensor10.1016/j.snb.2021.130267 ↗
53. A low-work-function, high-conductivity PEDOT:PSS electrode for organic solar cells with a simple structure10.1016/j.synthmet.2015.11.006 ↗