journal article·2022-04

Optimizing ultrasonic mist vapor deposition parameters toward facile synthesis of tungsten oxide nanofibers

Maziyar Kazemi, Mohammad Zirak, Nafiseh Arab, Hassan Alehdaghi, Javad Baedi

Publisher page

Abstract

Thanks to its high surface area, excellent condition for light absorption and scattering and suitable charge transport directions, nanofibrous morphology is a fascinating candidate for many important application fields. Herein as the first report, Tungsten oxide (WO 2.92 ) thin films have been prepared via ultrasonic mist vapor deposition (UMVD) method. The effects of important growth parameters namely substrate-nozzle distance (D = 3, 5 and 8 cm), deposition time (t = 3, 6 and 18 min), substrate temperature (T s = 130, 200 and 400 °C) and angle (θ = 0, 25 and 45°) on surface morphology of prepared thin films were investigated systematically. The analyses results revealed that T s and θ played more determining roles affecting on tungsten oxide thin film morphology. Interestingly, very clear and obvious tungsten oxide nanofibers were deposited uniformly over the whole of substrate surface when high deposition time and angle (t = 18 min, θ = 45°) and mild substrate temperature (T s = 200 °C) were utilized. The average diameter of grown nanofibers increased from 297 nm for θ = 0° to 429 nm for θ = 45°. No fibrous morphology was observed for the layers prepared with both low T s = 130 and high T s = 400 °C. Considering all of the results, a mechanism was proposed describing how the nanofibers were grown via UMVD method. obtaining fine tungsten oxide nanofibers via such a simple method is very interesting to use them as electrochromic coatings, sensors, photoelectrochemical electrodes etc.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. The effect of thermal annealing on photoelectrochemical responses of WO3 thin films10.1063/1.2729472 ↗
2. Improved electrochromical properties of sol–gel WO3 thin films by doping gold nanocrystals10.1016/j.tsf.2009.08.001 ↗
3. Fabrication of WO3 electrochromic devices using electro-exploding wire techniques and spray coating10.1016/j.solmat.2021.110960 ↗
4. Long-term-stable WO3-PB complementary electrochromic devices10.1016/j.jallcom.2020.158534 ↗
5. Facile growth of aligned WO3 nanorods on FTO substrate for enhanced photoanodic water oxidation activity10.1039/c3ta01175e ↗
6. Optical band-gap determination of nanostructured WO3 film10.1063/1.3313945 ↗
7. Electrochromic characteristics of fibrous reticulated WO3 thin films prepared by pulsed spray pyrolysis technique10.1016/j.solmat.2007.03.005 ↗
8. Preparation and characterization of spray deposited n-type WO3 thin films for electrochromic devices10.1016/j.materresbull.2004.04.023 ↗
9. Comparative investigation of the Ti and Mo additives influence on the opto-electronic properties of the spray deposited WO3 thin films10.1016/j.jallcom.2014.12.240 ↗
10. Amorphous WO3-x thin films with color characteristics tuned by the oxygen vacancies created during reactive DC sputtering10.1016/j.jmst.2020.11.036 ↗
11. Towards enhanced durability of electrochromic WO3 interfaced with liquid or ceramic sodium-based electrolytes10.1016/j.electacta.2020.136931 ↗
12. Preparation of WO3 films with controllable crystallinity for improved near-infrared electrochromic performances10.1021/acssuschemeng.0c03141 ↗
13. An Overview on WO3 based photocatalyst for environmental remediation10.1016/j.jece.2020.105018 ↗
14. Fabrication of BiFeO3-g-C3N4-WO3 Z-scheme heterojunction as highly efficient visible-light photocatalyst for water reduction and 2, 4-dichlorophenol degradation: insight mechanism10.1016/j.jhazmat.2020.122708 ↗
15. WO3/Cu2O heterojunction for the efficient photoelectrochemical property without external bias10.1016/j.apcatb.2019.118561 ↗
16. Toward enhancing the photoelectrochemical water splitting efficiency of organic acid doped polyaniline-WO3 photoanode by photo-assisted electrochemically reduced graphene oxide10.1016/j.electacta.2019.135475 ↗
17. Fabrication of a micro-electromechanical system-based acetone gas sensor using CeO2 Nanodot-Decorated WO3 nanowires10.1021/acsami.9b18863 ↗
18. Highly selective and sensitive WO3 nanoflakes based ammonia sensor10.1016/j.mssp.2020.104969 ↗
19. A review on WO3 based gas sensors: morphology control and enhanced sensing properties10.1016/j.jallcom.2019.153194 ↗
20. Effect of synthesis route on the structural and morphological properties of WO3 nanostructures10.1016/j.mssp.2019.104829 ↗
21. The optimization of surface morphology of Au nanoparticles on WO3 nanoflakes for plasmonic photoanode10.1088/1361-6528/ab70cf ↗
22. Improved electrochromic performance of WO3 films with size controlled nanorods10.1016/j.electacta.2017.10.193 ↗
23. Enhanced electrochromic properties of nanorod based WO3 thin films with inverse opal structure10.1016/j.tsf.2018.05.012 ↗
24. WO3 nanowires loaded with cobalt oxide nanoparticles, deposited by a two-step AACVD for gas sensing applications10.1016/j.snb.2019.126868 ↗
25. Synthesis of highly oriented WO3 nanowire bundles decorated with Au for gas sensing application10.1016/j.snb.2020.128439 ↗
26. Controllable synthesis of ultrathin WO3 nanotubes and nanowires with excellent gas sensing performance10.1016/j.snb.2019.127435 ↗
27. In situ growth of WO3 nanotube arrays and their H2S gas sensing properties for reduced operating temperature10.1016/j.matlet.2020.127716 ↗
28. Facile synthesis and gas sensing properties of La2O3–WO3 nanofibers10.1016/j.snb.2015.06.114 ↗
29. Boosting photoelectrochemical and photocatalytic performances of electronspun WO3 nanofibers by combining with biphase-Ag2WO410.1016/j.mssp.2020.105285 ↗
30. Oxygen-deficient nanofiber WO3–x/WO3 homojunction photoanodes synthesized via a novel metal self-reducing method10.1021/acsami.9b13326 ↗
31. Enhanced amperometric acetone sensing using electrospun non-stoichiometric WO3-x nanofibers10.1039/D0TC04922K ↗
32. Porosity and oxygen vacancy engineering of mesoporous WO3 nanofibers for fast and sensitive low-temperature NO2 sensing
33. Boosting photoelectrochemical and photocatalytic performances of electronspun WO3 nanofibers by combining with biphase-Ag2WO410.1016/j.mssp.2020.105285 ↗
34. Template based sintering of WO3 nanoparticles into porous tungsten oxide nanofibers for acetone sensing applications10.1039/C8TC05982A ↗
35. Facile synthesis and gas sensing properties of La2O3–WO3 nanofibers10.1016/j.snb.2015.06.114 ↗
36. Fabrication of Pd doped WO3 nanofiber as hydrogen sensor10.3390/polym5010045 ↗
37. Thickness control in electrophoretic deposition of WO3 nanofiber thin films for solar water splitting10.1016/j.mseb.2015.09.005 ↗
38. Characterization and electrical response to humidity of sintered polymeric electrospun fibers of vanadium oxide-(TiO2/WO3)10.1007/s11664-018-6112-1 ↗
39. Precision pH sensor based on WO3 nanofiber-polymer composites and differential amplification10.1021/acssensors.9b01579 ↗
40. Fabrication and characterization of polycrystalline WO3 nanofibers and their application for ammonia sensing10.1021/jp0635819 ↗
41. Improved NO2 sensing performance of electrospun WO3 nanofibers with silver doping10.1016/j.snb.2017.08.199 ↗
42. WO3 nanofiber-based biomarker detectors enabled by protein-encapsulated catalyst self-assembled on polystyrene colloid templates10.1002/smll.201502905 ↗
43. Facile synthesis and gas sensing properties of In2O3–WO3 heterojunction nanofibers10.1016/j.snb.2014.12.019 ↗
44. Facile preparation of WO3 nano-fibers with super large aspect ratio for high performance supercapacitor10.1016/j.jallcom.2018.09.085 ↗
45. WO3 nanofibers anchored by porous NiCo2O4 nanosheets for xylene detection10.1016/j.ceramint.2018.08.261 ↗
46. Hydrothermal synthesis, characterization and gas sensing properties of the WO3 nanofibers10.1016/j.matlet.2016.01.053 ↗
47. High efficient electrochromic WO3 nanofibers10.1016/j.electacta.2014.06.062 ↗
48. Electrochromic characteristics of pulsed spray pyrolyzed polycrystalline WO3 thin films
49. Titanium doping effects in electrochromic pulsed spray pyrolysed WO3 thin films10.1016/j.ssi.2008.02.052 ↗
50. Facile preparation of various ZnO nanostructures via ultrasonic mist vapor deposition: a systematic investigation about the effects of growth parameters10.1007/s10854-018-0546-3 ↗
51. Facile preparation of ZnO nanostructured thin films via oblique angle ultrasonic mist vapor deposition (OA-UMVD): a systematic investigation10.1007/s00339-020-3295-0 ↗
52. Preparation of ZnO-carbon quantum dot composite thin films with superhydrophilic surface10.1080/10667857.2020.1728863 ↗
53. The crystal and defect structures of W25O73, a member of the homologous series WnO3n-210.1107/S0567740876007280 ↗
54. Growth mechanism of planar or nanorod structured tungsten oxide thin films deposited via aerosol assisted chemical vapour deposition (AACVD)
55. Preparation and characterization of pyrolytic spray deposited electrochromic tungsten trioxide films10.1016/S0040-6090(99)00682-3 ↗
56. Enhancement of nonlinear absorption in defect controlled ZnO polycrystalline thin films by means of Co-doping10.1002/pssb.202000539 ↗
57. Optical properties of high pressure phases in ZnTe 1− x Se x10.1080/08957950212802 ↗
58. Effect of defect fields on the optical absorption edge10.1103/PhysRev.130.916 ↗
59. Tuning of hydrophobicity of WO3-based hot-dip zinc coating with improved self-cleaning and anti-corrosion properties10.1016/j.apsusc.2020.146762 ↗
60. A strategy of fast reversible wettability changes of WO3 surfaces between superhydrophilicity and superhydrophobicity10.1016/j.jcis.2010.08.064 ↗
61. Effect of post-annealing on the electrochromic properties of layer-by-layer arrangement FTO-WO3-Ag-WO3-Ag10.1007/s11664-018-6199-4 ↗
62. Effect of annealing on structural and optical properties of WO3 thin films prepared by electron-beam coating10.1016/j.physb.2006.09.010 ↗
63. Synthesis of WO3/TiO2 nanocomposites via sol–gel method10.1016/j.jallcom.2005.02.002 ↗
64. Optical and photoelectric properties and colour centres in thin films of tungsten oxide10.1080/14786437308227562 ↗
65. Dependence of WO3Electrochromic absorption on crystallinity10.1149/1.2133399 ↗
66. Fabrication and surface stochastic analysis of enhanced photoelectrochemical activity of a tuneable MoS2–CdS thin film heterojunction10.1039/C5RA26487A ↗