Boron-rich layer properties formed by boron spin on dopant diffusion in n -type silicon
Source abstract
Abstract
Abstract Starting with N-type base, a p-type emitter is formed using boron spin on dopant (BSoD) which results in formation of boron rich layer (BRL) on top of the emitter and can be used in selective emitter and FF improvements in solar cells. In this work, the morphologies of BRL for varying thicknesses, depending on the diffusion conditions, have been studied to know their impact on emitter formation. The characterizations show that BRL properties are dependent on its thickness and its boron concentration. BRL has amorphous phase with peak boron concentration over 1021 atoms/cm3, thickness less than 100 nm, refractive indices of 1.4–1.6 and contact resistance 1.0–6.0 mΩ-cm2. The bond properties of the constituent elements of BRL vary depending on the thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. P-type versus n-type silicon wafers: prospects for high-efficiency commercial silicon solar cells10.1109/TED.2006.878026 ↗
2. Effect of P-induced gettering on extended defects in n-type multi-crystalline silicon10.1002/pip.744 ↗
3. Fundamental boron–oxygen-related carrier lifetime limit in mono- and multi-crystalline silicon10.1002/pip.586 ↗
4. feasibility of n-type crystalline silicon wafer for fabricating industrial silicon solar cell with significant acceptable efficiency in near future10.9790/3021-02710106 ↗
5. Photovoltaic materials, history, status and outlook10.1016/S0927-796X(02)00092-X ↗
6. Advancements in n-type base crystalline silicon solar cells and their emergence in the photovoltaic industry, Hindawi Publishing Corporation10.1155/2013/470347 ↗
7. Das · 2012
8. Evaluation of boron solid source diffusion for high efficiency silicon solar cells
9. Boron emitters from doped PECVD layers for n-type crystalline silicon solar cells with LCO10.1016/j.egypro.2014.08.050 ↗
10. 20% Efficient screen-printed n-type solar cells using a spin-on source and thermal oxide/silicon nitride passivation10.1109/JPHOTOV.2011.2172189 ↗
11. PECVD silicon nitride passivation on boron emitter: the analysis of electrostatic charge on the interface properties10.1155/2010/487406 ↗
12. Taon · 1999
13. Michael Andreas Kessler, Tobias Ohrdes, Bettina Wolpensinger, Robert Bock, Nils-P. Harder, Characterisation and implications of the boron rich layer resulting from open-tube liquid source BBr3 boron diffusion process, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 001556–001561 http://dx.doi.org/10.1109/PVSC.2009.5411365.10.1109/PVSC.2009.5411365 ↗
14. Properties of boron-rich layer formed by boron diffusion in n-type silicon10.1016/j.tsf.2014.05.038 ↗
15. Charge carrier lifetime degradation in Cz silicon through the formation of a boron rich layer during BBr3 diffusion processes
16. Further insight on boron diffusion in silicon obtained with Auger electron spectroscopy10.1016/0040-6090(80)90454-X ↗
17. K.MurukesanD.V.Sridhara RaoK.MuraleedharanA.K.KapoorA.DhaulB.S..YadavB.M.Arora, An investigation of silicon boride surface layer resulting from boron diffusion in silicon, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, 2012, pp. 278–281 http://dx.doi.org/10.1109/PVSC.2012.6317618.10.1109/PVSC.2012.6317618 ↗
18. Glass source diffusion in Si and SiO210.1149/1.2408020 ↗
19. Study of boron precipitates formed during front side emitter formation with boron spin on dopant (BSOD) diffusion in n-type c-Si solar cells10.1016/j.egypro.2014.10.015 ↗
20. Fundamental understanding, impact, and removal of boron-rich layer on n-type silicon solar cells10.1016/j.solmat.2015.11.031 ↗