journal article·2018-10

Solution-processed phosphorus-tungsten oxide film as hole injection layer for application in efficient organic light-emitting diode

Weiwei Deng, Shirong Wang, Yin Xiao, Nonglin Zhou, Xianggao Li

Publisher page

Abstract

Abstract The research on new functional layer materials and optimization of fabrication in organic light-emitting diode (OLED) has been continuously concerned. In this work, phosphotungstic acid solution used as a precursor is spin-coated onto ITO anode, and then a phosphorus-tungsten oxide (WO3-P2O5) film is obtained after annealing treatment. Various parameters which include film composition, surface morphology, work function and optical property are measured. It suggests that the film has the composition of 24 WO3·P2O5 annealed at 200 °C, which exhibits work function of 5.55 eV, surface root mean square (RMS) roughness value of 1.525 nm and optical transmittance of over 92%. The WO3-P2O5 film is used as hole injection layer (HIL), and the OLED with the structure of [ITO/ WO3-P2O5/ TPD/ Alq3/ LiF/ Al] is fabricated. The performance of device shows turn-on voltage of 2.6 V, maximum luminance of 13553 cd/m2, maximum current efficiency of 5.87 cd/A and maximum power efficiency of 3.44 lm/W, respectively. The results provide a new way to deposit HIL based on solution-processed metal oxide in efficient OLED.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Transition Metal Oxide Nanomaterials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. High efficiency green phosphorescent organic light-emitting diodes with a low roll-off at high brightness10.1016/j.orgel.2013.08.006 ↗
2. Effect of the greenish-yellow emission on the color rendering index of white organic light-emitting devices10.1016/j.orgel.2014.08.016 ↗
3. Flexible transparent conductive films combining flexographic printed silver grids with CNT coating10.1088/0957-4484/27/6/065202 ↗
4. Dependence of indium–tin–oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
5. Compatibility of amorphous triarylamine copolymers with solution-processed hole injecting metal oxide bottom contacts10.1039/C4TC02593H ↗
6. Direct hole injection in to 4,4′-N,N′-dicarbazole-biphenyl: a simple pathway to achieve efficient organic light emitting diodes10.1063/1.3456513 ↗
7. Improved performance of organic light-emitting diodes fabricated on Al-doped ZnO anodes incorporating a homogeneous Al-doped ZnO buffer layer grown by atomic layer deposition10.1021/am400140c ↗
8. Electron transport materials for organic light-emitting diodes10.1021/cm049473l ↗
9. Interplay of cleaning and de-doping in oxygen plasma treated high work function indium tin oxide (ITO)10.1016/j.orgel.2012.05.036 ↗
10. Anode/organic interface modification by plasma polymerized fluorocarbon films10.1063/1.1667276 ↗
11. Surface properties of indium tin oxide treated by Cl2 inductively coupled plasma10.1016/j.apsusc.2014.08.016 ↗
12. Performance enhancement of organic light-emitting diodes by chlorine plasma treatment of indium tin oxide10.1063/1.4709426 ↗
13. Effect of PEDOT:PSS vs. MoO3 as the hole injection layer on performance of C545T-based green electroluminescent light-emitting diodes10.1016/j.displa.2014.04.004 ↗
14. Highly conductive PEDOT:PSS films by post-treatment with dimethyl sulfoxide for ITO-free liquid crystal display10.1039/C5TC00276A ↗
15. Methanol treatment on low-conductive PEDOT:PSS to enhance the PLED's performance10.1016/j.orgel.2015.10.039 ↗
16. Low operating-voltage and high power-efficiency OLED employing MoO3-doped CuPc as hole injection layer10.1016/j.displa.2011.10.002 ↗
17. Low driving voltage in organic light-emitting diodes using MoO3 as an interlayer in hole transport layer10.1016/j.synthmet.2008.07.016 ↗
18. Solution-processed nickel oxide nanoparticles with NiOOH for hole injection layers of high-efficiency organic light-emitting diodes10.1039/C6NR04643F ↗
19. Enhanced performance of organic light emitting device by insertion of conducting/insulating WO3 anodic buffer layer10.1016/j.synthmet.2005.03.019 ↗
20. Interface electronic structures of organic light-emitting diodes with WO3 interlayer: a study by photoelectron spectroscopy10.1016/j.orgel.2009.02.017 ↗
21. ChemInform abstract: transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
22. Highly efficient simplified organic light emitting diodes10.1063/1.2784176 ↗
23. Work function modification of solution-processed tungsten oxide for a hole-injection layer of polymer light-emitting diodes10.1016/j.orgel.2015.03.036 ↗
24. Tungsten oxide buffer layers fabricated in an inert sol‐gel process at room‐temperature for blue organic light‐emitting diodes10.1002/adma.201301627 ↗
25. Solution processed metal-oxides for organic electronic devices10.1039/c3tc30930d ↗
26. Photoemission study of the interface between phenyl diamine and treated indium–tin–oxide10.1063/1.124692 ↗
27. Materials and devices toward fully solution processable organic light-emitting diodes†10.1021/cm101937p ↗
28. Toward inkjet printing of small molecule organic light emitting diodes10.1016/j.tsf.2013.01.041 ↗
29. Old metal oxide clusters in new applications: spontaneous reduction of Keggin and Dawson polyoxometalate layers by a metallic electrode for Improving efficiency in organic optoelectronics10.1021/jacs.5b01889 ↗
30. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
31. A study of nanophase tungsten oxides thin films by XPS10.1116/11.20020801 ↗
32. Improved performance of organic light-emitting diodes fabricated on Al-doped ZnO anodes incorporating a homogeneous Al-doped ZnO buffer layer grown by atomic layer deposition10.1021/am400140c ↗
33. High-efficiency low operation voltage organic light-emitting diodes10.1063/1.2718274 ↗
34. Two trans -1-(9-anthryl)-2-phenylethene derivatives as blue-green emitting materials for highly bright organic light-emitting diodes application10.1016/j.orgel.2017.07.054 ↗
35. Modified conducting polymer hole injection layer for high-efficiency perovskite light-emitting devices: enhancedenhanced hole injection and reduced luminescence quenching10.1021/acs.jpclett.7b01992 ↗
36. Heavily doped, charge-balanced fluorescent organic light-emitting diodes from direct charge trapping of dopants in emission layer10.1021/acsami.5b04519 ↗
37. High-color-purity organic light-emitting diodes incorporating a cyanocoumarin-derived red dopant material10.1149/1.2990718 ↗
38. Charge transfer through amino groups-small molecules interface improving the performance of electroluminescent devices10.1016/j.optmat.2016.03.020 ↗
39. Solution-processed MoOx hole injection layer towards efficient organic light-emitting diode10.1016/j.orgel.2016.09.022 ↗
40. Poly(3,4-ethylenedioxythiophene): sulfonated poly(diphenylacetylene) complex as a hole injection material in organic light-emitting diodes10.1557/mrc.2017.60 ↗
41. Enhanced electrical properties of PEDOT: pss films using solvent treatment and its application to ITO-free organic light-emitting diodes10.1016/j.jlumin.2017.03.002 ↗
42. Low resistance and high work-function WO3/Ag/MoO2 multilayer as transparent anode for bright organic light-emitting diodes10.7567/JJAP.54.03CC01 ↗