High mobility tungsten-doped indium oxide (IWO) deposited by room-temperature RF sputtering in pure argon plasma
Source abstract
Abstract
Transparent conductive oxides (TCOs) are a key element in many applications, such as liquid crystal displays, organic light-emitting diodes and solar cells. In heterojunction solar cells they serve both as antireflective coatings and as conductive layers, so high mobilities along with low electron densities are necessary. Tungsten-doped indium oxide (IWO) grown by radio-frequency sputtering is a promising solution to meet all the above-mentioned requirements. In this work we show how a simple non-reactive room-temperature radio-frequency sputtering deposition followed by a low-temperature thermal annealing treatment allows producing IWO films with mobilities up to 70.9 cm/V⋅s and low carrier concentrations of 2-4 × 1020 cm−3, which result in resistivities as low as 2.5 × 10−4 Ω∙cm. We show that the sputtering damage to passivation can be recovered by a thermal treatment. A work function around 4.2 eV for most IWO films is also evaluated, which is a relevant parameter when applying the IWO as a TCO in solar cells. Possible effects of oxygen depletion in the target during deposition are also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Interactive Best Research-Cell Efficiency Chart, https://www.nrel.gov/pv/interactive-cell-efficiency.html, data accessed May 2024.
2. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
3. Development of new aSi/c-Si heterojunction solar cells: ACJ-HIT (Artificially Constructed Junction-Heterojunction with Intrinsic Thin layer)10.1143/JJAP.31.3518 ↗
4. Application of hydrogenated amorphous silicon oxide layers to c-Si heterojunction solar cells10.1063/1.2790815 ↗
5. Metastability of a-SiOx:H thin films for c-Si surface passivation10.1016/j.apsusc.2016.09.026 ↗
6. In2O3-Based transparent conducting oxide films with high electron mobility fabricated at low process temperatures
7. Industrial TCOs for SHJ solar cells: approaches for optimizing performance and cost
8. Performance of electron beam deposited tungsten doped indium oxide films as anodes in organic solar cells10.1016/j.solmat.2011.03.020 ↗
9. Polycrystalline films of tungsten-doped indium oxide prepared by d.c. magnetron sputtering10.1016/j.matlet.2006.05.010 ↗
10. Room-temperature sputtered tungsten-doped indium oxide for improved current in silicon heterojunction solar cells10.1016/j.solmat.2021.111082 ↗
11. Room temperature processed high mobility W-doped In2O3 electrodes coated via in-line arc plasma ion plating for flexible OLEDs and quantum dots LEDs
12. Transparent conductive oxide thin films of tungsten-doped indium oxide10.1016/j.tsf.2006.07.014 ↗
13. Fabrication and study of laser-damage-resistant transparent conductive W-doped In2O3 films10.1088/0022-3727/44/21/215101 ↗
14. Tungsten-doped In2O3 transparent conductive films with high transmittance in near-infrared region10.1016/j.jcrysgro.2008.05.012 ↗
15. Rapid thermal annealed WO3-doped In2O3 films for transparent electrodes in organic photovoltaics10.1088/0022-3727/45/39/395104 ↗
16. Tungsten doped indium oxide film: ready for bifacial copper metallization of silicon heterojunction solar cells10.1016/j.solmat.2015.09.033 ↗
17. Discovery-based design of transparent conducting oxide films10.1016/j.tsf.2007.03.014 ↗
18. Carrier transport in polycrystalline transparent conductive oxides: a comparative study of zinc oxide and indium oxide10.1016/j.tsf.2007.05.084 ↗
19. Understanding the role of mobility of ITO films for silicon heterojunction solar cell applications10.1016/j.solmat.2016.08.002 ↗
20. Magnetron sputtering of transparent conductive zinc oxide: relation between the sputtering parameters and the electronic properties10.1088/0022-3727/33/4/201 ↗
21. Electronegativities of elements in valence states and their applications. 2. A scale for strengths of Lewis acids10.1021/ic00141a006 ↗
22. Correlations between the electronic properties of doped indium oxide ceramics and the nature of the doping element10.1016/0921-5107(92)90339-B ↗
23. Weekend read: Indium – sustainability, not supply, https://www.pv-magazine-australia.com/2022/01/15/weekend-read-indium-sustainability-not-supply/.
24. About us”, https://www.photorama-project.eu/about-us/.
25. Silicon solar cell with undoped tin oxide transparent electrode10.1038/s41560-023-01331-7 ↗
26. 180 published articles on “Indium Tin Oxide” only in 2023, data taken from https://www.scopus.com.
27. High mobility W-doped In2O3 thin films: effect of growth temperature and oxygen pressure on structural, electrical and optical properties10.1016/j.apsusc.2007.07.146 ↗
28. High electron mobility W-doped In2O3 thin films by pulsed laser deposition10.1063/1.2048829 ↗
29. Prolonged annealing improves hole transport of silicon heterojunction solar cells10.1002/pssr.202100015 ↗
30. High quality of IWO films prepared at room temperature by reactive plasma deposition for photovoltaic devices10.1088/0022-3727/46/7/075103 ↗
31. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
32. Tungsten doped indium oxide (IWO) transparent electrode used in air-annealed perovskite solar cells
33. Christmann · 2018
34. Amorphous indium tungsten oxide films prepared by DC magnetron sputtering10.1007/s10853-005-0660-5 ↗
35. Preparation and properties of tungsten-doped indium oxide thin films10.1007/s12598-012-0483-x ↗
36. Tungsten doped indium oxide thin films deposited at room temperature by radio frequency magnetron sputtering10.1016/j.jmst.2013.10.023 ↗
37. Development of high mobility TCOs for heterojunction solar cells
38. Interdigitated back contact silicon heterojunction solar cell and the effect of front surface passivation
39. Stretched-exponential a-Si:H/c-Si interface recombination decay10.1063/1.2956668 ↗
40. Influence of ITO deposition and post annealing on HIT solar cell structures10.1016/j.egypro.2011.06.125 ↗
41. KSEMAW: an open source software for the analysis of spectrophotometric, ellipsometric and photothermal deflection spectroscopy measurements10.12688/openreseurope.13842.2 ↗
42. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
43. Silicon heterojunction solar cells toward higher fill factor10.1002/pip.3241 ↗
44. Selective contacts and fill factor limitations in heterojunction solar cells10.1002/pip.3418 ↗
45. Avantage Data Spectrum Processing, Technical Notes, Thermo Scientific, https://xpslibrary.com.
46. High quality ITO thin films grown by dc and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
47. Indium tin oxide films prepared by radio frequency magnetron sputtering method at a low processing temperature10.1016/S0040-6090(00)01418-8 ↗
48. Effect of tungsten doping on the properties of In2O3 films
49. Energy level evolution of air and oxygen exposed molybdenum trioxide films10.1063/1.3454779 ↗
50. A microstructural study of low resistivity tin-doped indium oxides prepared by d.c. magnetron sputtering10.1016/0040-6090(94)90646-7 ↗
51. The oxidation and surface speciation of indium and indium oxides exposed to atmospheric oxidants10.1016/j.susc.2015.10.026 ↗
52. Tunable work function of a WOx buffer layer for enhanced photocarrier collection of pin-type amorphous silicon solar cells10.1063/1.3583576 ↗
53. Effect of substrate temperature on structural, optical and electrical properties of pulsed laser ablated nanostructured indium oxide films10.1016/j.apsusc.2009.05.057 ↗
54. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
55. Damage to passivation contact in silicon heterojunction solar cells by ITO sputtering under various plasma excitation modes10.1016/j.solmat.2018.12.001 ↗
56. A. Illiberi, P. Kudlacek, A. H. M. Smets, M. Creatore, M. C. M. van de Sanden, Effect of ion bombardment on the a-Si:H based surface passivation of c -Si surfaces, Appl. Phys. Lett. 98 (211) 242115. doi:10.1063/1.3601485.10.1063/1.3601485 ↗
57. Role of front contact work function on amorphous silicon/crystalline silicon heterojunction solar cell performance10.1109/LED.2003.811405 ↗
58. High-mobility hydrogenated indium oxide without introducing water during sputtering10.1016/j.egypro.2016.07.083 ↗