A systematic investigation on pyridine derived solid additives inducing fibrillar morphology for highly efficient organic solar cells with over 20 % efficiency
Source abstract
Abstract
A comprehensive understanding of the potential mechanism of the additives-treated photoactive layers is crucial for achieving the desired nanofiber morphology and thus obtaining high performance organic solar cells (OSCs). Herein, three electronegative additives, namely 3,5-dibromopyridine (DBP), 2-methoxy-3,5-dibromopyridine (M-DBP), and 2,6-dimethoxy-3,5-dibromopyridine (DM-DBP), are investigated as solid additives into the D18:L8-BO system. With the increase of the non-covalent interaction between solid additive(s) and active materials, the phase separation and fibrillization of donor and acceptor is distinguishably promoted. However, the device efficiency hasn’t been found depending on the fiber length scale as expected, where the charge generation and non-radiative loss are sacrificed. On the contrary, it is found partial fibrillization of active layer treated by 5 mg/ml M-DBP yields the optimal performance, i.e., 19.18 % for binary blend, and 20.07 % for ternary system. Based on the cutting-edge device results, this study demonstrates a full landscape on active layer morphology optimization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Semitransparent organic photovoltaics for building-integrated photovoltaic applications10.1038/s41578-022-00514-0 ↗
2. Key molecular perspectives for high stability in organic photovoltaics10.1038/s41578-023-00606-5 ↗
3. Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells10.1038/s41560-024-01557-z ↗
4. Approaching 20% Efficiency in Ortho-Xylene Processed Organic Solar Cells by a Benzo[a]phenazine-Core-Based 3D Network Acceptor with Large Electronic Coupling and Long Exciton Diffusion Length10.1002/adma.202407517 ↗
5. Highly efficient organic solar cells enabled by suppressing triplet exciton formation and non-radiative recombination10.1038/s41467-024-53286-2 ↗
6. Constructing multiscale fibrous morphology to achieve 20% efficiency organic solar cells by mixing high and low molecular weight D1810.1002/adma.202408934 ↗
7. Co-adsorbed self-assembled monolayer enables high-performance perovskite and organic solar cells10.1038/s41467-024-51760-5 ↗
8. Achieving 20.8% organic solar cells via additive-assisted layer-by-layer fabrication with bulk p-i-n structure and improved optical management10.1016/j.joule.2024.08.001 ↗
9. Ma · Advanced Materials · 2025 · 37
10. 19.46%-efficiency all-polymer organic solar cells with excellent outdoor operational stability enabled by active layer reconstruction
11. Self-assembled interlayer enables high-performance organic photovoltaics with power conversion efficiency exceeding 20%10.1002/adma.202400342 ↗
12. 20.2% efficiency organic photovoltaics employing a π-extension quinoxaline-based acceptor with ordered arrangement10.1002/adma.202406690 ↗
13. A three-dimensional solid additive suppresses non-radiative recombination loss to boost efficiency and scalability in organic photovoltaics10.1039/D4EE03394A ↗
14. Binary organic solar cells with 19.2% efficiency enabled by solid additive10.1002/adma.202301583 ↗
15. Recent development in solid additives enables high-performance organic solar cells10.1016/j.enchem.2024.100129 ↗
16. Solid additive dual-regulates spectral response enabling high-performance semitransparent organic solar cells10.1002/adma.202308750 ↗
17. Tackling Energy Loss in Organic solar cells via volatile solid additive strategy10.1002/advs.202401330 ↗
18. Thiophene structured additives toward enhanced structural order and reduced non-radiative loss for 19.9% efficiency organic solar cells
19. Ambient preparation of benzoxazine-based phenolic resins enables long-term sustainable photosynthesis of hydrogen peroxide
20. Ameliorated trap density and energetic disorder by strengthened intermolecular interaction strategy to construct efficient non-halogenated organic solar cells10.1039/D4EE00291A ↗
21. An isomeric solid additive enables high-efficiency polymer solar cells developed using a benzo-difuran-based donor polymer10.1002/adma.202301231 ↗
22. High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy10.1016/j.matt.2021.06.010 ↗
23. Optimizing double-fibril network morphology via solid additive strategy enables binary all-polymer solar cells with 19.50% efficiency10.1002/adma.202406922 ↗
24. Solid additive-assisted selective optimization strategy for sequential deposited active layers to construct 19.16% efficiency binary organic solar cells10.1002/adfm.202311216 ↗
25. Understanding the role of removable solid additives: selective interaction contributes to vertical component distributions10.1002/adma.202302861 ↗
26. 1,5-Diiodocycloctane: a cyclane solvent additive that can extend the exciton diffusion length in thick film organic solar cells
27. A broad-spectrum solid additive to further boost high-efficiency organic solar cells via morphology regulation10.1021/acsenergylett.3c01178 ↗
28. Brominated isomerization engineering of 1-chloronaphthalene derived solid additives enables 19.68% efficiency organic solar cells10.1016/j.mser.2024.100879 ↗
29. Cyano-functionalized pyrazine: an electron-deficient unit as a solid additive enables binary organic solar cells with 19.67% efficiency10.1039/D4EE00764F ↗
30. Dual additive-assisted layer-by-layer processing for 19.59% efficiency quasi-bulk heterojunction organic solar cells
31. Enhance photo-stability of up-scalable organic solar cells: suppressing radical generation in polymer donors
32. Molecular stacking and aggregation optimization of photoactive layer through solid additive enables high-performance organic solar cells
33. Piperazine-functionalized arylene diimides as electron transport layers for high-efficiency and stable organic solar cells
34. Solid additive-assisted layer-by-layer processing for 19% efficiency binary organic solar cells10.1007/s40820-023-01057-x ↗
35. Synergistically optimizing the optoelectronic properties and morphology using a photo-active solid additive for high-performance binary organic photovoltaics10.1039/D3EE04065H ↗
36. Crossbreeding effect of chalcogenation and iodination on benzene additives enables optimized morphology and 19.68% efficiency of organic solar cells10.1002/advs.202401405 ↗
37. Restrained energetic disorder for high-efficiency organic solar cells via a solid additive10.1039/D3EE00927K ↗
38. Binary all-polymer solar cells with a perhalogenated-thiophene-based solid additive surpass 18% efficiency
39. Modulating aggregation behavior by ternary strategies for efficient and stable thick-film organic solar cells
40. 3D macroporous frame based microbattery with ultrahigh capacity, energy density, and integrability
41. Highly electronegative additives suppress energetic disorder to realize 19.19% efficiency binary organic solar cells10.1016/j.nanoen.2024.110016 ↗
42. Impact of intermolecular interactions between halogenated volatile solid additives and the nonfullerene acceptor in organic solar cells10.1002/adfm.202307355 ↗
43. Amplifying high-performance organic solar cells through differencing interactions of solid additive with donor/acceptor materials processed from non-halogenated solvent10.1002/aenm.202401597 ↗
44. Impact of electrostatic interaction on non-radiative recombination energy losses in organic solar cells based on asymmetric acceptors10.1002/anie.202304931 ↗
45. Quantification of quantum efficiency and energy losses in low bandgap polymer:fullerene solar cells with high open-circuit voltage10.1002/adfm.201200608 ↗
46. Competitive absorption and inefficient exciton harvesting: lessons learned from bulk heterojunction organic photovoltaics utilizing the polymer acceptor P(NDI2OD-T2)10.1002/adfm.201401367 ↗
47. Capacitance spectroscopy for quantifying recombination losses in nonfullerene small-molecule bulk heterojunction solar cells10.1002/aenm.201502250 ↗
48. Exploring the charge dynamics and energy loss in ternary organic solar cells with a fill factor exceeding 80%10.1002/aenm.202101338 ↗
49. A highly damping, crack-insensitive and self-healable binder for lithium-sulfur battery by tailoring the viscoelastic behavior
50. In-situ removable solid additive optimizing active layer and cathode interlayer of organic solar cells10.1002/aenm.202402517 ↗
51. Insulating polymer mediated stability and photovoltaic performance of organic solar cells: influence of molecular weight10.1002/adfm.202408340 ↗
52. Asymmetrified benzothiadiazole-based solid additives enable all-polymer solar cells with efficiency over 19%
53. Volatile solid-assisted molecular assembly enables eco-friendly processed organic photovoltaic cells with high efficiency and photostability10.1002/adfm.202314178 ↗
54. Fibrillization of non-fullerene acceptors enables 19% efficiency pseudo-bulk heterojunction organic solar cells10.1002/adma.202208211 ↗
55. Defining solid additive's pivotal role on morphology regulation in organic solar cells produced by layer-by-layer deposition10.1002/aenm.202400354 ↗
56. A polycrystalline polymer donor as pre-aggregate toward ordered molecular aggregation for 19.3% efficiency binary organic solar cells10.1002/adma.202304921 ↗
57. How to interpret transient absorption data?: an overview of case studies for application to organic solar cells10.1002/aenm.202301890 ↗
58. Manipulating the charge carriers through functionally bridged components advances low-cost organic solar cells with green solvent processing