Microstructure and resistance to thermal fatigue cracking of dilute lead–copper sheet alloys Part 1–Characterisation of lead-copper hypoeutectic structure and dispersion of second phase copper particles
Source abstract
Abstract
Hypoeutectic microstructures in the non1aceted/faceted Pb–Cu system solidified under various cooling conditions are investigated. The results are consistent with the semiquantitative scheme proposed by other workers to classify regular and irregular eutectic microstructures. The morphology of the copper phase changes from lamella/flake–fibre with increased growth velocity, and becomes fully fibrous when growth velocity exceeds ~0·5 mm S−l. The microstructual development is influenced by the cooling conditions. Lead dendritic growth is dominant except when the undercooling is small and the temperature gradient in front of the solid/liquid interface is positive and large, when the interface becomes cellular. In rolling, copper particles break up during rolling deformation owing to load transfer from the lead matrix, which increases with increased particle aspect ratio and flow stress of the lead matrix. Fully fibrous copper produced by rapid solidification breaks up into very fine and well dispersed particles.MST/3030
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. D. M. RICE: 'Lead sheet exposure project final report', The Broken Hill Associated Smelters Pty Ltd, Melbourne, Australia, September, 1988.
2. 10.1179/mst.1991.7.12.111610.1179/mst.1991.7.12.1116 ↗
3. S. NISHIKAWA, S. NAGASHIMA, and T. KASAHARA: in Proc. 3rd Int. Lead Conf. ‘Pb '68', 135–151; 1968, London, Lead Development Association.10.1016/B978-0-08-015644-6.50013-4 ↗
4. HOFMANN W. · 1965 · 75
5. P. GREGORY and D. McALLISTER: in Proc. 2nd Int. Lead Conf. 'Pb '65', 73–78; 1965, London, Lead Development Association.
6. 10.1179/mst.1989.5.11.107410.1179/mst.1989.5.11.1074 ↗
7. U. 'TWINER and H. REINERT: in Proc. 7th Int. Lead Conf. 'Pb '80', 204–214; 1980, London, Lead Development Association.
8. 10.1007/978-3-662-28508-410.1007/978-3-662-28508-4 ↗
9. MASING G. · Z. Metallkd. · 1956 · 47 · 64
10. D. J. CHAKRABARTI and D.E. LAUGHLIN: Bull. Alloy Phase Diagrams, 1984, 5, (5), 503, see also 'Binary alloy phase diagrams', 945; 1990, Metals Park, OH, ASM.10.1007/BF02872905 ↗
11. R. Ewan 'Eutectic solidification processing'; 1983, London, Butterworths.
12. 10.1098/rspa.1973.011110.1098/rspa.1973.0111 ↗
13. 10.1016/0022-0248(75)90055-X10.1016/0022-0248(75)90055-X ↗
14. 10.1016/0022-0248(75)90090-110.1016/0022-0248(75)90090-1 ↗
15. HUNT J. D. · Trans. Metall. Soc. AIME · 1968 · 242 · 1403
16. S. C. SARSON: 'Investigation in the copper—lead system', PhD thesis, University of Cambridge, 1991.
17. MOLLARD F. R. · Trans. Metall. Soc. AIME · 1966 · 239 · 1129
18. CLINE H. E. · Trans. Metall. Soc. AIME · 1968 · 242 · 1613
19. HURLE D. T. J. · J. Cryst. Growth · 1968 · 3
20. H w. w and w. C. WINEGARD: in 'Crystal growth', (ed. H. S. Peiser), 179; 1967, Oxford, Pergamon.
21. TAYLOR M. R. · J. Cryst. Growth · 1968 · 3
22. TAYLOR M. R. · Metall. Soc. AIME · 1971 · 2 · 1793
23. FIDLER R. S. · J. Cryst. Growth · 1972 · 13
24. K. A. JACKSON: 'Liquid metals and solidification', 174; 1958, Cleveland, OH, ASM.
25. K. A. JACKSON: 'Growth and perfection of crystals', (ed. R. H. Doremus et al.), 391; 1958, New York, Wiley.
26. 10.1016/0022-0248(68)90211-X10.1016/0022-0248(68)90211-X ↗
27. 10.1016/0022-0248(69)90071-210.1016/0022-0248(69)90071-2 ↗
28. HuNrr J. D. · Trans. TMS-AIME · 1966 · 236 · 843
29. R. HULTGREN, P. D. DESAI, D. T. HAWKINS, M. GLEISER, and K. K. KELLEY: 'Selected values of the thermodynamic properties of binary alloys'; 1973, Metals Park, OH, ASM.
30. L. I. GOFF and R.D. SEMMENS: in Proc. 2nd Int. Lead Conf. ‘Pb '65', 295–309; 1965, London, Lead Development Association.
31. umcKEL H. · J. Inst. Met. · 1937 · 61 · 171
32. D. Z. WANG: in Proc. 4th Riso Int. Symp. 'Metallurgy and materials science', (ed. J. B. Sorensen et al.), Roskilde, Denmark, 5–9 September, 1983, Riso National Laboratory, pp. 569–574.
33. 10.1179/03071697680339165610.1179/030716976803391656 ↗
34. 10.1179/03071697480328783410.1179/030716974803287834 ↗