journal article·2000-11

Superplasticity and production of mechanically milled Ti–6Al–4V–0.5B

T.M.T. Godfrey, A. Wisbey, A. Brown, R. Brydson, C. Hammond

Materials Science and Technology· Volume 16· Issue 11-12
Publisher page

Abstract

Superplastic forming of conventional titanium alloy sheet is limited commercially by the relatively long cycle times imposed by the high temperatures and slow strain rates required. In order to minimise cycle times material with a fine grain size is required to allow either, an increase in the forming rate or a reduction in the deformation temperature. This study details the manufacture of Ti–6Al–4V–0.5B powder with a nanocrystalline grain size, which was produced by mechanical milling. The material was consolidated by hot isostatic pressing at a range of temperatures during which ∼2.5 vol.-%TiB was formed by an in situ reaction between the titanium and boron. The TiB particles limited the growth of the grain size in the titanium from the nanocrystalline structure in the powder to sizes in the range 600 nm–4 µm after consolidation. The consolidated material was hot tensile tested at a range of temperatures and strain rates. A superplastic elongation of 310%was achieved when testing at 900°C at a strain rate of 6×10-2 s-1 compared with 220% for conventional Ti–6Al–4V sheet. However, extensive cavitation, induced by the presence of argon, occurred during high temperature deformation and limited the superplastic extensions achieved.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. 10.1016/0025-5416(80)90070-110.1016/0025-5416(80)90070-1 ↗
2. 10.1115/1.344352710.1115/1.3443527 ↗
3. INAGAKI H. · Z. Metallkd · 1995 · 86 · 643
4. 10.1016/0956-7151(94)00464-S10.1016/0956-7151(94)00464-S ↗
5. 10.1016/0956-7151(95)00032-Q10.1016/0956-7151(95)00032-Q ↗
6. FAN Z. · PhD thesis · 1993 · The University
7. 10.1179/mst.1998.14.7.64010.1179/mst.1998.14.7.640 ↗
8. OEHIUNG M. · Mater. Sci. Eng. A · 1991 · A134
9. 10.1016/0956-716X(95)93210-U10.1016/0956-716X(95)93210-U ↗
10. N. F. KAZAKOV and V. F. KVASNITSKY: in ‘Diffusion bonding of materials’, (ed. N. F. Kazakov), 170–185; 1985, Oxford, Pergamon.10.1016/B978-0-08-032550-7.50013-8 ↗
11. 10.1007/BF0281763410.1007/BF02817634 ↗
12. 10.1007/BF0035469210.1007/BF00354692 ↗