journal article·2011-07

Formation of ultrafine grained ferrite during thermomechanical treatment in microalloyed steel

A N Bhagat, Neelkant

Materials Science and Technology· Volume 27· Issue 7
Publisher page

Abstract

In the present work, the formation of ultrafine grained ferrite has been studied by applying suitable thermomechanical treatment. A high amount of deformation (∼80%) at varying strain rates (0·01–10 s−1) was applied in the temperature range of Ar3 to Ac3 followed by water quenching. This treatment resulted in a two-phase ferrite–martensite microstructure as compared to fully martensite structure after quenching without deformation. The formation of ultrafine ferrite (⩽3 μm) during deformation was favourable at a lower temperature and a slower strain rate. A maximum ∼50% ferrite formed during deformation at 780°C with a strain rate of 0·01 s−1. Experimental rolling with a high strain (∼1·3) with finish rolling temperature just above Ar3 (∼750°C) resulted in fine ferrite–pearlite of ⩽3 μm, and the properties showed a high value of strength as compared to steels rolled in a conventional way. Dual phase microstructure (ferrite and martensite) was produced after partial austenisation to 780°C followed by quenching in water, and this resulted in an excellent combination of properties (high ultimate tensile strength, low yield strength/ultimate tensile strength, high elongation and high n values).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

R&D and SS Division Tata Steel Ltd, Burmamines, Jamshedpur, Jharkhand 831007, India

References (16)

Show source-provided references
1. Meyer L, Heisterkamp F, Mueschenborn W: Proc. Int. Symp. Microalloying ’75, 153; 1975, Washington, DC, Union Carbide Corp.
2. 10.2355/isijinternational.41.56610.2355/isijinternational.41.566 ↗
3. 10.1016/j.msea.2006.08.09510.1016/j.msea.2006.08.095 ↗
4. 10.2355/isijinternational.43.74610.2355/isijinternational.43.746 ↗
5. Hodgson P, Shokouhi A, Beladi H: Proc. Int. Conf. on ‘Advanced structural steels’, Gyeongju, Korea, August 2006, The Korean Institute of Metals and Materials, 41.
6. Um K-K, Choi J-K: Proc. Int. Conf. on ‘Advanced structural steels’, Gyeongju, Korea, August 2006, The Korean Institute of Metals and Materials, 119.
7. 10.2355/isijinternational.39.47710.2355/isijinternational.39.477 ↗
8. Torizuka S, Nagai K, Ohmori A: Proc. 2nd Int., Conf. on ‘Advance structural steels’, Shanghai, China, April 2004, Chinese Society for Metals, 114.
9. 10.1016/S0924-0136(02)00272-810.1016/S0924-0136(02)00272-8 ↗
10. Linxiua D, Kun Y, Xianghua L, Guodong W: Proc. 2nd Int. Conf. on ‘Advance structural steels’, Shanghai, China, April 2004, Chinese Society for Metals, 132.
11. 10.1016/S0921-5093(01)01806-810.1016/S0921-5093(01)01806-8 ↗
12. Choo WY, Um K.K, Lee J.S, Seo D.H, Choi J.K: Proc. Int. Symp. on ‘Ultrafine grained steels’, Fukuoka, Japan, The Iron and Steel Institute of Japan, 2.
13. Hodgson PD, Hurley PJ, Kelly GL: Proc. Int. Symp. on ‘Ultrafine grained steels’, Fukuoka, Japan, The Iron and Steel Institute of Japan, 10.
14. 10.1016/S0921-5093(01)01359-410.1016/S0921-5093(01)01359-4 ↗
15. Takata N, Tsuji N, Koyama H: Proc. Int. Conf. on ‘Advanced structural steels’, Gyeongju, Korea, August 2006, The Korean Institute of Metals and Materials, 150.
16. Tsuji N: Proc. Int. Conf. on ‘Advanced structural steels’, Gyeongju, Korea, August 2006, The Korean Institute of Metals and Materials, 49.