journal article·2003-02

Influence of P on hot ductility of high C, Al, and Nb containing steels

B. Mintz, A. Cowley, C. Talian, D. N. Crowther, R. Abushosha

Materials Science and Technology· Volume 19· Issue 2
Publisher page

Abstract

Hot ductility curves for high carbon Nb and Nb free steels have been determined immediately after casting at two P levels, ~0.01% and ~0.045%. High strain rates of 0.1-0.55 s-1 were generally used but some limited low strain rate testing at 7 × 10-3 s -1 was carried out on Nb containing steels. Nb containing steels showed, as expected, worse ductility than the Nb free steel but high P level was detrimental to ductility for both steels and ductility in general was very poor. Failure was intergranular with the presence of films of a P rich phase at the boundaries in the case of the Nb free steels and in addition to this, in Nb containing steel there was a Nb rich phase. The films were thicker and more continuous in the higher P steels. It is suggested that the P rich films are probably the low melting point phase Fe3P or Fe3(Mn)P, which can remain liquid down to temperatures as low as 950°C. Some back diffusion of P into the grain interior is possible if the strain rate is reduced and/or at high testing temperatures during the 5 min hold prior to testing. This allowed some improvement in ductility to occur in the lower P containing steels by reducing the amount of the low melting point phase at the boundaries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. BLOOM T. A. · Iron Steelmaker · 1990 · 17 · 35
2. 10.2355/isijinternational.40.19110.2355/isijinternational.40.191 ↗
3. WOLF M. M. · Ironmaking Steelmaking · 1985 · 12 · 299
4. 10.2355/isijinternational1966.24.5410.2355/isijinternational1966.24.54 ↗
5. 10.2355/isijinternational.30.31010.2355/isijinternational.30.310 ↗
6. 10.1179/03071697980327647110.1179/030716979803276471 ↗
7. 10.2355/isijinternational.39.83310.2355/isijinternational.39.833 ↗
8. GUPTA I. · ISS Mech. Work Steel Process. Conf. Proc · 1979 · 21 · 60
9. 10.1016/0001-6160(80)90112-110.1016/0001-6160(80)90112-1 ↗
10. RAZUMOV S. D. · Steel USSR · 1986 · 16 · 225
11. 10.2355/isijinternational1966.25.14910.2355/isijinternational1966.25.149 ↗
12. 10.2355/isijinternational1966.24.16910.2355/isijinternational1966.24.169 ↗
13. 10.1002/(SICI)1521-396X(199806)167:2<313::AID-PSSA313>3.0.CO;2-510.1002/(SICI)1521-396X(199806)167:2<313::AID-PSSA313>3.0.CO;2-5 ↗
14. 10.1002/1521-396X(199704)160:2<285::AID-PSSA285>3.3.CO;2-B10.1002/1521-396X(199704)160:2<285::AID-PSSA285>3.3.CO;2-B ↗
15. 10.1007/BF0267476110.1007/BF02674761 ↗
16. YASHIMA Y. · Nisshin Steel Tech. Rep · 1986 · 51 · 1
17. ADAMS C. J. · Nat. Open Hearth B OS Conf. Proc · 1971 · 54 · 290