journal article·2009-08

Parametric and non-parametric modelling of earing and hardness of deep drawn cups

B. Lela, I. Duplančić, D. Bajić

Materials Science and Technology· Volume 25· Issue 8
Publisher page

Abstract

This study compares different approaches in modelling the earing phenomenon and hardness of cups in deep drawing process. The blank holder force (BHF), annealing temperature and annealing time of blanks before deep drawing process have been chosen as the three influential parameters on the earing and hardness. To obtain mathematical models for the earing and hardness of the deep drawn cups, the methodology of artificial neural networks have been used. Bayesian network, radial basis function network, Gaussian processes and multilayer perceptron are four different ANN approaches that have been used for the modelling. The research has been conducted on a cold rolled Al–Fe–Si (AA8011A) aluminium sheet. After obtaining the mathematical models describing the influence of BHF and annealing on hardness and earing, a comparison of the proposed models has been performed. A search for the optimal parameters of deep drawing process has been carried out.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Electrical EngineeringMechanical Engineering and Naval Architecture, University of Split, Ruđera Boškovića bb, 21000 Split, Croatia;, Email: blela@fesb.hr

Faculty of Electrical EngineeringMechanical Engineering and Naval Architecture, University of Split, Ruđera Boškovića bb, 21000 Split, Croatia

References (25)

Show source-provided references
1. ‘Aluminium handbook’, Vol. 2, ‘Forming, casting, surface treat-ment, recycling and ecology’: 2002, Düsseldorf, Aluminium-Verlag Marketing & Kommunikation GmbH.
2. 10.1016/j.jmatprotec.2005.02.25710.1016/j.jmatprotec.2005.02.257 ↗
3. 10.1016/S0921-5093(01)01968-210.1016/S0921-5093(01)01968-2 ↗
4. Aghaie-Khafri M. · J. Mater. Sc
5. Delijié K., Asanovié V., and Radonjié D.: MTAEC9, 2006,40, (3), 83.
6. 10.1016/S0921-5093(04)00901-310.1016/S0921-5093(04)00901-3 ↗
7. Cheng X.-M. · 2000
8. 10.1016/S0921-5093(01)01960-810.1016/S0921-5093(01)01960-8 ↗
9. Roy R. K. · J. Alloys Compd
10. 10.1016/S0924-0136(96)02693-310.1016/S0924-0136(96)02693-3 ↗
11. 10.1016/S0924-0136(97)00349-X10.1016/S0924-0136(97)00349-X ↗
12. 10.1016/S0924-0136(02)00253-410.1016/S0924-0136(02)00253-4 ↗
13. 10.1016/j.jmatprotec.2006.04.02610.1016/j.jmatprotec.2006.04.026 ↗
14. 10.1016/j.jmatprotec.2004.08.02010.1016/j.jmatprotec.2004.08.020 ↗
15. Box G. E. P., and Draper N. R. ‘Empirical model building and response surfaces’: 1987, New York, John Wiley and Sons.
16. Hu Y. H., and Hwang J.N. ‘Handbook of neural network signal processing’, Electrical Engineering & Applied Signal Processing Series,Vol. 5; 2001, Boca Raton, FL, USA, CRC Press.
17. 10.1093/oso/9780198538493.001.000110.1093/oso/9780198538493.001.0001 ↗
18. Mackey D. J. C. ‘Bayesian methods for adaptive models’, PhD thesis, California Institute of Technology, USA, 1992.
19. Kuss M. · 2006
20. Riedmiller M. · Proc. IEEE Int. Conf. on ‘Neural networks (ICNN), San Francisco, CA, USA, 1993, IEEE, · 586
21. Krogh A., and Hertz J. A: in ‘Advances in neural information processing systems’, (ed.Moody J. et al), Vol. 4, 950-957; 1992, San Mateo, CA, Morgan Kaufmann.
22. 10.1137/S105262349630347010.1137/S1052623496303470 ↗
23. 10.1214/aos/103218115810.1214/aos/1032181158 ↗
24. Rivals I., and Personnaz L.: Neural Computat. 1999, 11, (4), 863–870.10.1162/089976699300016476 ↗
25. MATLAB User's Guide: The Mathworks, 2003, ‘Neural Network Toolbox’.