Metastable phase formation in rapidly solidified Al–Mo alloys
Source abstract
Abstract
In Al-Mo alloys, rapidly quenched from the melt at rates of approximately 106 KS−1, it has been demonstrated that single phase solid solution alloys can be obtained in materials with up to 1·3 at.-%Mo. Above this concentration, two new metastable phases are observed in the form of small precipitates within the matrix of aluminium-rich solid solution. These have been identified as a diamond cubic phase, space group Fd3m, a =1·4–1·5 nm and a hexagonal phase, space group P6/mmm or P6/mmc, a = 0·45 nm, c = 0·27 nm. The maximum supersaturation of the solid solution matrix, obtained in alloys containing such precipitates, was found to be 2·45 at.-%Mo. Upon annealing, both the solid solutions and the metastable intermediate phases decompose directly to the equilibrium structure of aluminium-rich solid solution and Al12Mo. The Al12Mo forms either as precipitates on the grain boundaries or as a layer around the metastable intermediate phases. From a good correlation between the maximum supersaturation obtained and that predicted by consideration of thermodynamic and kinetic factors it is suggested that a similar theoretical treatment may be used to provide an indication of the maximum supersaturation achievable in other systems.MST/824
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. 1974 · 5 · 195
2. 1986 · 2 · 83
3. 1983 · 28 · 189