On strength of microalloyed steels: An interpretive review
Source abstract
Abstract
In the mid-1950s, hot rolled carbon steels exhibited high carbon contents, coarse ferrite pearlite microstructures, and yield strengths near 300 MPa. Their ductility, toughness and weldability were poor. Today, a half century later, hot rolled steels can exhibit microstructures consisting of mixtures of ferrite, bainite and martensite in various proportions. These structures are very fine and can show yield strengths over 900 MPa, with acceptable levels of ductility, toughness and weldability. This advancement was made possible by the combination of improved steelmaking, microalloying technology and better rolling and cooling practices. The purpose of this paper is to chronicle some of the remarkable progress in steel alloy and process design that has resulted in this impressive achievement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
BAMPRI (The Basic Metals Processing Research Institute)Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA; Finland Distinguished Professor, Department of Mechanical Engineering, University of Oulu, PO box 4200 (Linnanmaa), FIN 90014, Finland
BAMPRI (The Basic Metals Processing Research Institute)Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
References (53)
Show source-provided references
1. Proc. Conf. Microalloying ‘75; 1977, New York, Union Carbide Corp.
2. Graff M. K., Hillenbrand H. G., and Peters P. A. ‘Accelerated cooling of steel’, 165; 1986, Warrendale, PA, TMS-AIME.
3. H. Asahi et al.: Proc. IPC 2004, Calgary, Alberta, Canada, October 2004, ASME, Paper IPC04-0230.
4. Bai D., Collins L., Hamad F., Chen X., and Klein R.: Proc. Conf. on ‘Materials science and technology’, Detroit, MI, USA, September 2007, MS&T, 355.
5. Yada H.: in ‘Accelerated cooling of rolled steel’, (ed. Ruddle G. E., and Crawley A. F.), 105; 1988, New York, Pergamon Press.
6. Morrison W. B. · J. Iron Steel Inst · 1963 · 201 · 317
7. 10.1179/09506600322500883310.1179/095066003225008833 ↗
8. Friedel J. ‘Dislocations’, 1967, Oxford, Pergamon Press.
9. 10.1016/0036-9748(73)90270-610.1016/0036-9748(73)90270-6 ↗
10. Gladman T., Dulieu D., and McIvor I. D.: Proc. Conf. Micro-alloying ‘75, 32; 1977, New York, Union Carbide Corporation.
11. Sakuma T. · Met. Set · 1984 · 18 · 449
12. 10.1179/mst.1985.1.5.35110.1179/mst.1985.1.5.351 ↗
13. Thillou V., Hua M., Garcia C. I., Perdrix C., and DeArdo A. J.: in ‘Microalloying in steels: new trends for the 21st century’, (ed. J. M. Rodriguez-Ibabe et al), 311; 1998, San Sebastian, Trans Tech Publications.10.4028/www.scientific.net/MSF.284-286.311 ↗
14. Parish C.: Unpublished research, BAMPRI, University of Pittsburgh, 2001.
15. Wu J. H.: Unpublished research, BAMPRI, University of Pittsburgh, 2001.
16. Hua M.: Unpublished research, BAMPRI, University of Pittsburgh, 2005.
17. Smith R. G., and Honeycombe R. W. K.: Proc. 6th Int. Conf. on ‘Strength of metals and alloys’, 407; 1982, Oxford, Pergamon Press.10.1016/B978-1-4832-8423-1.50068-7 ↗
18. Mangonon P. L. · Proc. Conf. Micro-alloying ‘75, 59; 1977, New York, Union Carbide Corporation.
19. Santella M. I. · 1981
20. Parayil T., and Ludkovsky G.: Proc Conf. on ‘Accelerated cooling of rolled steel’, 131; 1988, New York, Pergamon Press.10.1016/B978-0-08-035770-6.50014-3 ↗
21. 10.1179/mst.1997.13.1.4910.1179/mst.1997.13.1.49 ↗
22. Tamehiro H. · Proc. 3rd Int. Conf. on ‘Steel rolling: technology of pipe and tube and their application’, 545; 1985, Tokyo, ISIJ.
23. Proc. Conf. on ‘Accelerated cooling of steel’, Pittsburgh, PA, USA, August 1985, TMS-AIME.
24. Morikawa H., and Hasegawa T.: Proc. Conf. on ‘Accelerated cooling of steel’, Pittsburgh, PA, USA, August 1985, TMS-AIME, 83.
25. 10.1007/BF0265992410.1007/BF02659924 ↗
26. Okaguchi S. · Proc. Conf. Thermec ‘88,
27. Tamehiro H. · Proc. Conf. on ‘Accelerated cooling of steel’, August 1985, Pittsburgh, PA, USA, TMS-AIME, 401.
28. Pickering F. B.: Proc. Conf. Microalloying ‘75, 9; 1977, New York, Union Carbide Corp.
29. Garcia C. I., and DeArdo A. J. ‘Microalloyed HSLA steels’, 291; 1988, Warrendale, PA, ASM International.
30. Pickering F. B. ‘Physical metallurgy and the design of steels’, 101; 1978, London, Applied Science.
31. Coldren A. P., Cryderman R. L., and Semchyshen M. ‘Steel strengthening mechanisms’, 17; 1969, Ann Arbor, MI, Climax Molybdenum Co.
32. Takahashi M., Yoshida H., and Hiwatashi S.: Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, 103; 2002, Ghent, GRIPS’ Sparkling World of Steel.
33. Matsuda H., Yoshida H., Hiwatashi S., Takahashi M., Yoshida H., and Hiwatashi S.: Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, 112; 2002, Ghent, GRIPS’ Sparkling World of Steel.
34. Bhadeshia H. K. D. H. ‘Bainite in steels: transformations, microstructure, and properties’, 2nd edn; 2001, London, IOM Communications Ltd.
35. Cabellero F. G., Santofimia M. J., Capdevila C., Garcia-Mateo C., and de Andrés C. G.: ISIJ Int. 2006, 46, 1479.10.2355/isijinternational.46.1479 ↗
36. Habraken L. J., and Economopoulos M. ‘Transformations and hardenability in steels’, 69; 1967, Ann Arbor, MI, Climax Molybdenum Co.
37. Hayashi T., Kawabata F., and Amano K. ‘Accelerated cooling/ direct quenching of steels’, 93; 1997, Materials Park, OH, ASM International.
38. 10.1016/S1044-5803(99)00060-110.1016/S1044-5803(99)00060-1 ↗
39. 10.1007/s11661-003-0010-710.1007/s11661-003-0010-7 ↗
40. Schwinn V., Zajac S., Fluess P., and Tacke K.H. ‘Bainitc steel plates for X100 and X120’, Proc. 4th Int. Conf. on ‘Pipeline technology’, Ostend, Belgium, May 2004, Elsevier.
41. 10.1016/j.msea.2005.05.00810.1016/j.msea.2005.05.008 ↗
42. Boyd D. · Proc. Int. Conf. on ‘Microalloyed steels: processing, microstructure, properties and performance’, (ed.
43. Suikkanen P., Karjalainen P., Porter D., and DeArdo A. J.: Proc. 3rd Int. Conf. on ‘Thermomechanical processing of steels’, Padua, Italy, September 2008, AIM, to be published.
44. Wu J. H., Wray P. J., Garcia C. I., Hua M. J., and DeArdo A. J.: ISIJ Int. 2005, 45, (2), 254.10.2355/isijinternational.45.254 ↗
45. Barrett C. S., and Massalski T. B. ‘Structure of metals’, 459; 1966, New York, McGraw-Hill.
46. 10.1080/1042691060113417910.1080/10426910601134179 ↗
47. Wu J., Garcia C. I., Hua M., Gao W., Cho K., and DeArdo A. J. ‘Steel product metallurgy and applications’, in ‘Materials science and technology (MS&T) 2006: product manufacturing, materials’, (ed.Nelson B. D., and Merwin M. J.), 305; 2006, Warrendale, PA, ACerS, AIST, ASM and TMS.
48. Cho K. · Proc. Int. Conf. on ‘Microalloyed steels: processing, microstructure, properties and performance proceedings’, (ed.
49. Garcia C. I. · Proc. Int. Conf. on ‘Microalloyed steels: processing, microstructure, properties and performance proceedings’, (ed.
50. Cho K. ‘EBSD analysis on bainitic plate steel’, Unpublished research, BAMPRI, University of Pittsburgh, 2007.
51. 10.4028/www.scientific.net/MSF.500-501.48110.4028/www.scientific.net/MSF.500-501.481 ↗
52. Repas P. E. ‘Metallurgical fundamentals for HSLA steels’, in ‘Microalloyed HSLA steels’, 3; 1988, Materials Park, OH, ASM International.
53. Hillenbrand H. G., Liessem A., Biermann K., Heckmann C. J., and Schwinn V.: Proc. IPC 2004, Calgary, Alberta, Canada, October 2004, ASME, Paper IPC04-0224.