Microstructural aspects of high temperature deformation of monocrystalline nickel base superalloys: Some open problems
Source abstract
Abstract
Some open questions concerning the microstructural mechanisms which govern the high temperature strength of monocrystalline nickel base superalloys will be reviewed in the context of previous work. Emphasis will be laid on microstructural effects observed in microyielding, creep, isothermal and thermomechanical fatigue and on the role of the γ/ γ′ lattice misfit with respect to γ/ γ′ rafting. The conditions for cutting of the γ′ rafts will be stated in a simplified two-dimensional dislocation model. Effects of the connectivity of the coarsened γ/ γ′ microstructure and of the orientation of γ/ γ′ rafts on the strength properties will be discussed, and potentially beneficial effects of a positive lattice misfit will be addressed. Attention will be drawn to counteracting alloying effects which modify both the lattice mismatch and the diffusion kinetics. The main conclusion is that the optimisation of superalloy properties can only be sought in improving the most important properties without deterioration of other desirable properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Gell M. · Mater. Sci. Technol · 1987 · 39 · 11
2. Erickson G. L.: Proc. 8th Int. Symp. on ‘Superalloys’, (ed.Kissinger R. D. et al.), 35-44; 1996, Warrendale, PA, The Minerals, Metals and Materials Society.
3. Strudel J.L.: in ‘Physical metallurgy’, (ed. Cahn R. W., and Haasen P.), Vol. 3, 2105-2206; 1996, Amsterdam, Elsevier Science BV.10.1016/B978-044489875-3/50030-2 ↗
4. Pollock T. M., and Field R. D.: in ‘Dislocations in solids’, (ed. F. R. N. Nabarro and M. S. Duesberry),Vol. 11, 547-618; 2002, Amsterdam, Elsevier Science BV.10.1016/S1572-4859(02)80014-6 ↗
5. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
6. 10.1002/1527-2648(200006)2:6<319::AID-ADEM319>3.0.CO;2-S10.1002/1527-2648(200006)2:6<319::AID-ADEM319>3.0.CO;2-S ↗
7. 10.1016/0036-9748(86)90458-810.1016/0036-9748(86)90458-8 ↗
8. 10.1016/0036-9748(85)90273-X10.1016/0036-9748(85)90273-X ↗
9. McLean M. · Philos. Trans. Roy. Soc. Lond A · 1995 · 351 · 41910.1098/rsta.1995.0044 ↗
10. Gabb T. P., Draper S. L., Hull D. R., MacKay R. A., and Nathal M. V.: Mater. Sci Eng. A, 1989, A118,59–69.10.1016/0921-5093(89)90058-0 ↗
11. Pollock T. M. · Metall · 1994 · 4
12. 10.1016/0956-7151(94)00432-H10.1016/0956-7151(94)00432-H ↗
13. 10.1016/0956-7151(91)90095-I10.1016/0956-7151(91)90095-I ↗
14. 10.1007/BF0264894210.1007/BF02648942 ↗
15. Mughrabi H.: Proc The Johannes Weertman Symp. (ed.Arsenault R. J. et al.), 267-278; 1996, Warrendale, PA, The Minerals, Metals and Materials Society.
16. 10.1016/1359-6454(96)00011-010.1016/1359-6454(96)00011-0 ↗
17. Link T. · Z. Metall · 1987 · 78 · 617
18. Reichstein S. ‘Diplomarbeit% 1996, Erlangen, Universität Erlangen-Nürnberg.
19. Reichstein S., Kraft S., and Mughrabi H.: submitted to Intern. J. Mater. Res, 1996.
20. 10.1007/BF0264750010.1007/BF02647500 ↗
21. 10.1007/BF0264740510.1007/BF02647405 ↗
22. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗
23. Fedelich B. · Personal communication · 1999
24. Caron P., and Khan T.: Mater. Sci. Eng. A, 1983, A61,173–184.10.1016/0025-5416(83)90199-4 ↗
25. 10.1007/BF0266239810.1007/BF02662398 ↗
26. Fredholm A., and Strudel J.L.: in ‘High temperature alloys, their exploitable potential’, (ed.Marriott J. B.), 9-18; 1987, London and New York, Elsevier Applied Science.
27. Schneider W., Hammer J., and Mughrabi H.: Proc. 7th Int. Symp. on ‘Superalloys” (ed.Antolovich S. D. et al), 589-598; 1992, Warrendale, PA, The Minerals, Metals and Materials Society.
28. Mughrabi H., Schneider W., Sass V., and Lang C.: Proc. 10th Int. Conf. on ‘Strength of materials’, (ed.Oikawa H. et al), 705-708; 1994, Sendai, The Japan Institute of Metals.
29. 10.1016/S1359-6454(99)00093-210.1016/S1359-6454(99)00093-2 ↗
30. 10.1007/BF0266758510.1007/BF02667585 ↗
31. Biermann H. · Z. Metall · 1996 · 87 · 403
32. von Grossmann B., Biermann H., Mechsner S., and Mughrabi H.: Proc. 6th Liege Conf. on ‘Materials for advanced power engineer-ing’, (ed. J. Lecomte-Beckers et al),Vol. 5, No. 3, 1429-1438; 1998, Jülich GmbH, Forschungszentrum Mich.
33. Schneider W.: Dr.Ing. Thesis, Hochtemperaturkriechverhalten und Mikrostruktur der einkristallinen Nickelbasis—Superlegierung CMSX-4 bei Temperaturen von 800°C bis 1100°C, 1993, Universität Erlangen-Nürnberg.
34. Schneider W., and Mughrabi H.: Proc. 5th Int. Conf. on ‘Creep and fracture of engineering materials and structures’, (ed.Wilshire B., and Evans R. W.), 209-220; 1993, London, The Institute of Metals.
35. Kraft S. A., and Mughrabi H.: in ‘Thermomechanical fatigue behavior of materials: second volume, ASTM STP 1263’, (ed.Verrilli M. J., and Castelli M. G.), 27-40; 1996, Philadelphia, PA, American Society for Testing and Materials.
36. 10.1115/1.292023210.1115/1.2920232 ↗
37. 10.1016/S1359-6454(96)00223-610.1016/S1359-6454(96)00223-6 ↗
38. Pearson D. D., Lemkey F. D., and Kear B. H.: Proc. 4th Int. Symp. on ‘Superalloys’, (ed.Tien J. K. et al), 513-520; 1980, Metals Park, OH, American Society for Metals.10.7449/1980/Superalloys_1980_513_520 ↗
39. Hammer J.: Dr. Ing. Thesis, Kriech- und Zeitstandverhalten der einkristallinen Nickelbasis—Superlegierung SRR 99 unter beson-derer Berücksichtigung der mikrostrukturellen Vorgänge und der Materialfehler, 1990, Universität Erlangen-Nürnberg.
40. Mughrabi H. · Proc. IUTAM-Symp. on ‘Micromechanics of plasticity and damage of multiphase materi-als’, (ed.
41. Tian S., Zhou H., Zhang J., Yang H., Xu Y., and Hu Z.: Mater. Sci Eng. A, 2000, A279,160–165.
42. Carry C., and Strudel J.L.: Acta Metall, 1977, 25, 767-777 and 1978, 26,859–870.10.1016/0001-6160(78)90035-4 ↗
43. 10.1023/B:JMSC.0000004409.70156.6a10.1023/B:JMSC.0000004409.70156.6a ↗
44. Koizumi Y., Kobayashi T., Yokokawa T., Zhang J., Osawa M., Harada H., Aoki Y., and Arai M.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A.), 35-43; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_35_43 ↗
45. Carroll L. J. · Met. Mater. Trans. A · 2008 · 39 · 129110.1007/s11661-008-9520-7 ↗
46. Biermann H.: Habil. thesis, Ursachen und Auswirkungen der gerichteten Vergröberung (“FloBbildung”) in einkristallinen Nickelbasis—Superlegierungen, 1999, Universität Erlangen-Nürnberg.
47. 10.1016/S1359-6454(00)00292-510.1016/S1359-6454(00)00292-5 ↗
48. Yeh A. C., Rae C. M. F., and Tin S.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A.); 677-685, 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_677_685 ↗
49. Rowland L. J., Feng Q., and Pollock T. M.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A.), 697-706; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_697_706 ↗
50. 10.1016/S1359-6454(96)00151-610.1016/S1359-6454(96)00151-6 ↗
51. 10.1016/S1359-6454(98)00043-310.1016/S1359-6454(98)00043-3 ↗
52. 10.1007/BF0264750010.1007/BF02647500 ↗
53. 10.1007/BF0264976810.1007/BF02649768 ↗
54. Tetzlaff U., and Mughrabi H.: Proc. 9th Int. Symp. on ‘Superalloys’, (eds. T. M. Pollock et al), 273-282; 2000, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2000/Superalloys_2000_273_282 ↗
55. Ott M., and Mughrabi H.: Mater. Sci. Eng. A, 1999, A272,24–30.10.1016/S0921-5093(99)00453-0 ↗
56. Neuner F. C., Tetzlaff U., and Mughrabi H.: in ‘Thermomechanical fatigue behavior of materials: (ed.McGaw M.), Vol. 4, 112-126; 2002, Philadelphia, PA, American Society for Testing and Materials.10.1520/STP11430S ↗
57. Murakumo T., Koizumi Y., Kobayashi K., and Harada H.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 155-162; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_155_162 ↗
58. 10.1016/j.actamat.2005.04.04110.1016/j.actamat.2005.04.041 ↗
59. Pyczak F., Devrient B., and Mughrabi H.: Proc. 10th Int. Symp. on ‘Superalloys’, (eds. K. A. Green et al.), 827-836; 2004, Warrendale, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_827_836 ↗
60. Fu C. L., Reed R., Janooti A., and Kremar M.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 867-876; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_867_876 ↗
61. Walston S., Cetel A., Mra R., Duhl D., and Dreshfield R.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 15-24; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_15_24 ↗
62. Koizumi Y., Kobayashi T., Yokokawa T., Zhang J., Osawa M., Harada H., Aoki Y., and Arai M.: Proc. 10th Int. Symp. on ‘Superalloys’, (ed.Green K. A. et al), 35-43; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_35_43 ↗
63. Dlouhy A., Probst-Hein M., and Eggeler G.: Mater. Sci. Eng. A, 2001, A309-310,278–282.10.1016/S0921-5093(00)01793-7 ↗
64. 10.1080/1478643041000166324010.1080/14786430410001663240 ↗