journal article·2014-05

Effect of microalloying elements on austenite grain growth in Nb–Ti and Nb–V steels

A. Karmakar, S. Kundu, S. Roy, S. Neogy, D. Srivastava, D. Chakrabarti

Materials Science and Technology· Volume 30· Issue 6
Publisher page

Abstract

Development of austenite grain structures have been compared in two different microalloyed steels (Nb–Ti and Nb–V steels) and one Al killed C–Mn steel, after soaking at 950–1250°C for 1 h. Minimum austenite grain size in Nb–V steel at the lower soaking temperature (<1075°C) can be attributed to the pinning effect from AlN, Nb(C,N) and V(C,N) precipitates. At the intermediate soaking temperatures (1150–1200°C) dissolution of Nb precipitates led to an abnormal austenite grain growth and the formation of bimodal grain size distributions in microalloyed steels. Grain size bimodality was more severe in Nb–V steel as compared to Nb–Ti steel. Complete absence of precipitates allowed the austenite grains to grow freely at higher soaking temperature (>1200°C) in all the steels. Higher stability of TiN precipitate restricted the grain growth in Nb–Ti steel at higher soaking temperature. An effort has been made to predict the austenite grain size considering both solute drag and Zener drag.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Indian Institute of Technology (I.I.T.) Kharagpur, 721 302, West Bengal, India

Products Research Group, Research and Development, Tata Steel, Jamshedpur, 831 001, India

Materials Science Division, Bhabha Atomic Research Centre (BARC), Mumbai, 400 085, India

References (41)

Show source-provided references
1. Gladman T. ‘The physical metallurgy of microalloyed Steels’; 1997, London, The Institute of Materials.
2. Tither G., Proc. 2nd Int. Conf. on ‘HSLA steels: processing, properties and applications’, (ed. Tither G. et al.), 61–80; 1992, Beijing, TMS.
3. Porter D. A., and Easterling K. E. ‘Phase transformations in metals and alloys’, 2nd edn; 2000, Cheltenham, Stanley Thornes.
4. 10.1007/s11661-008-9535-010.1007/s11661-008-9535-0 ↗
5. 10.1007/s11661-009-9794-410.1007/s11661-009-9794-4 ↗
6. 10.1016/j.msea.2004.01.14410.1016/j.msea.2004.01.144 ↗
7. 10.1016/0956-7151(90)90264-H10.1016/0956-7151(90)90264-H ↗
8. 10.1016/j.msea.2006.01.02710.1016/j.msea.2006.01.027 ↗
9. 10.1179/1743284711Y.000000000110.1179/1743284711Y.0000000001 ↗
10. Zener C. · Trans. Metall. Soc. AIME · 1948 · 175 · 15
11. Gladman T. · Proc. R. Soc. Lond · 1966 · 294 · 298
12. 10.1016/0001-6160(87)90280-X10.1016/0001-6160(87)90280-X ↗
13. 10.1016/0001-6160(85)90214-710.1016/0001-6160(85)90214-7 ↗
14. 10.1007/BF0266236610.1007/BF02662366 ↗
15. 10.1007/BF0264797310.1007/BF02647973 ↗
16. Militzer M. · Metall. Trans. A · 1966 · 27 · 3400
17. 10.1007/s11661-010-0376-210.1007/s11661-010-0376-2 ↗
18. 10.1016/j.actamat.2011.11.01610.1016/j.actamat.2011.11.016 ↗
19. 10.1016/j.matdes.2008.03.00910.1016/j.matdes.2008.03.009 ↗
20. 10.1023/A:101866711198110.1023/A:1018667111981 ↗
21. 10.2355/isijinternational.47.30710.2355/isijinternational.47.307 ↗
22. 10.1007/s11661-012-1409-910.1007/s11661-012-1409-9 ↗
23. 10.1007/BF0035311010.1007/BF00353110 ↗
24. 10.1179/msc.1979.13.3-4.18710.1179/msc.1979.13.3-4.187 ↗
25. 10.1016/j.msea.2013.01.00510.1016/j.msea.2013.01.005 ↗
26. 10.1016/j.matchar.2006.06.01410.1016/j.matchar.2006.06.014 ↗
27. 10.2320/matertrans1989.32.104210.2320/matertrans1989.32.1042 ↗
28. Ruiz-Aparicio A. ‘Evolution of microstructure in Nb-bearing microalloyed steels produced by the compact strip production process’, Master's thesis, University of Pittsburgh, Pittsburgh, PA, 2004.
29. 10.2355/isijinternational.36.139710.2355/isijinternational.36.1397 ↗
30. 10.1016/j.msea.2012.11.01910.1016/j.msea.2012.11.019 ↗
31. 10.1016/S1359-6462(02)00283-X10.1016/S1359-6462(02)00283-X ↗
32. 10.2355/isijinternational.47.30710.2355/isijinternational.47.307 ↗
33. 10.1179/mst.1991.7.3.24910.1179/mst.1991.7.3.249 ↗
34. 10.1007/s10853-006-1191-410.1007/s10853-006-1191-4 ↗
35. 10.1007/BF0264600510.1007/BF02646005 ↗
36. 10.1016/j.actamat.2005.10.03710.1016/j.actamat.2005.10.037 ↗
37. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
38. 10.1179/msc.1969.3.1.9510.1179/msc.1969.3.1.95 ↗
39. Gladman T., and Senogles D. J., Proc. Int. Conf. on ‘Titanium technology in microalloyed steels’, (ed. Baker T. N.), 83–90; 1997, London, Institute of Materials.
40. 10.1016/0001-6160(62)90092-510.1016/0001-6160(62)90092-5 ↗
41. 10.1016/0956-7151(90)90177-I10.1016/0956-7151(90)90177-I ↗