journal article·2007-11

Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets

R. Nadella, D. Eskin, L. Katgerman

Materials Science and Technology· Volume 23· Issue 11
Publisher page

Abstract

Direct chill (DC) casting experimental results are presented for an Al–Zn–Mg–Cu alloy with and without grain refining by attempting the inoculant addition either in the furnace or in the launder at two different casting speeds. Despite considerable structural refinement macro segregation remains unchanged with grain refining at a lower casting speed. Hot cracking, on the other hand, is totally prevented at this casting speed. Depending on the grain refining practice, either hot tears do not appear at all or prior cracks existing in the non-grain refined billet are completely healed. At a higher casting speed, the severity of segregation increases. The hot cracking tendency, however, has shown a distinct difference with grain refining method, with furnace-refined alloy resulting in a crack-free billet. But the billet grain refined in the launder exhibited hot cracking. Overall, these experimental results confirm the beneficiary effect of grain refining on hot cracking.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Emley E. F. · Int. Meta. Rev · 1976 · 206 · 75
2. Grandfield J. F. · Mater. Forum · 1996 · 20 · 29
3. Arnberg L., Bäckerud L., and Chai G.: in ‘Solidification characteristics of aluminum alloys’,Vol. 3, ‘Dendrite coherency’, (ed. Thomas S. P.), 201–249; 1996, Des Plaines, IL, American Foundarymen's Society.
4. Eskin D. G. · Prog. Mater. Sci · 2004 · 4910.1016/S0079-6425(03)00037-9 ↗
5. Chu M. G., and Jacoby J. E.: in ‘Light metals 1990’, (ed.Blckert C. M.), 925–930; 1990, Warrendale, PA, TMS.
6. Finn T. L., Chu M. G., and Bennon W. D.: in ‘Micro/macro scale phenomena in solidification’, (ed.Beckermann C.), 17–26; 1992, Anaheim, CA, ASME.
7. Reddy A. V. · Metall. Mater. Trans. B · 1997 · 2810.1007/s11663-997-0115-2 ↗
8. Flemings M. C. ‘Solidification processing'; 1974, New York, McGraw-Hill.10.1007/BF02643923 ↗
9. Novikov I. I. ‘Hot shortness of non-ferrous metals and alloys’,
10. Dorward R. C., and Beerntsen D. J.: in ‘Light metals 1990’, (ed.
11. Commet B., Delaire P., Rabenberg J., and Storm J.: in ‘Light metals
12. Eskin D. G., Zuidema J., Jr, V. I. Savran and L. Katgerman:
13. 10.1007/s11661-004-0192-710.1007/s11661-004-0192-7 ↗
14. Matsuda K., Nagai S., Miyate Y., Maehara H., and Tsukuda I.: in ‘6th international aluminium extrusion technology seminar’,Vol. 1, 525–528; 1996, Chicago, IL, Aluminium Extruders Council and the Aluminium Association.
15. Eskin D. G., Savran V. I., and Katgerman L.: Metall Mater. Trans.
16. 10.1179/03071698380329122610.1179/030716983803291226 ↗
17. Warrington D., and McCartney D. G.: Cast Met. 1989,3, 202–208.10.1080/09534962.1990.11819040 ↗
18. Warrington D., and McCartney D. G.: Cast Met. 1989,2, 134–143.10.1080/09534962.1989.11818994 ↗
19. Easton M. · Mater. Forum · 2004 · 28 · 224
20. 10.1007/s11661-004-0307-110.1007/s11661-004-0307-1 ↗
21. 10.1007/BF0258614110.1007/BF02586141 ↗
22. Gariepy B., and Caron Y.: in ‘Light metals 1991’, (ed.Rooy E. L.), 961-971; 1991, Warrendale, PA, TMS.
23. 10.1007/s11661-003-0263-110.1007/s11661-003-0263-1 ↗
24. 10.1016/S1468-6996(01)00055-910.1016/S1468-6996(01)00055-9 ↗
25. Hakonsen A., Mortensen D., Benum S., and Vatne H. E.: in ‘Light metals 1999’, (ed.Eckert C. E.), 821-827; 1999, Warrendale, PA, TMS.
26. Nadella R. · Mater. Sei. Forum · 2006 · 519
27. Langsrud Y.: in ‘8th International light metals congress’, 481-485; 1987, Düsseldorf, Aluminium-Verlag.
28. 10.1016/j.scriptamat.2006.06.02110.1016/j.scriptamat.2006.06.021 ↗
29. Yu H., and Granger D. A.: in ‘Aluminum alloys 1986: their physical and mechanical properties’, (ed. E. A. Starke, Jr and T. H. Sanders, Jr), 17-29; 1986, Warly, EMAS.
30. Nadella R. K., Eskin D., and Katgerman L.: in ‘International conference on continuous casting of non-ferrous metals’, (ed. Willer H. R.), 277-282; 2005, Weinheim, Wiley-VCH Verlag GmbH.10.1002/9783527607969.ch38 ↗
31. Rappaz M. · Metall. Mater. Trans. A · 1999 · 3010.1007/s11661-999-0334-z ↗
32. Suyitno W. H. Kool and L. Katgerman: Mater. Set Forum, 2002, 396-402,179–184.10.4028/www.scientific.net/MSF.396-402.179 ↗
33. Campbell J. ‘Castings’, 1991, Oxford, Butterworth-Heinemann Ltd.