journal article·1997-02

Influence of particles on recrystallisation textures and microstructures of aluminium alloy 3103

H. E. Vatne, O. Engler, E. Nes

Materials Science and Technology· Volume 13· Issue 2
Publisher page

Abstract

The evolution of recrystallisation textures in the commercial aluminium alloy 3103 has been investigated by means of a three-dimensional orientation distribution function (ODF) analysis. The global texture measurements were supplemented by local texture measurements by means of the electron backscattering pattern (EBSP) technique in SEM and optical microscopy, inparticular grain size measurements. The evolution of recrystallisation textures was determined by the competition between particle stimulated nucleation (PSN) and nucleation from cube bands. Precipitated particles were found to have a higher retarding effect on the nucleation from deformation zones around particles than on the nucleation from cube bands. The result of this is a strong cube texture and a large grain size in cases of a strong precipitation reaction. This phenomenon has also been discussed theoretically in terms of a semiquantitative model.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. GREWEN J. · Z. Metallkd., · 1968 · 59 · 236
2. 10.1179/mst.1991.7.6.55410.1179/mst.1991.7.6.554 ↗
3. HANSEN N. · Mem. Sci. Rev. Met., · 1975 · 72 · 189
4. J. HIRSCH, G. BURMEISTER, L. HOENEN, and K. LÜCKE: in ‘Experimental techniques of texture analysis’, (ed. H. J. Bunge), 63; 1986, Oberursel, DGM.
5. H.J. BUNGE: ‘Texture analysis in materials science’; 1982, London, Butterworth.
6. 10.1016/0001-6160(81)90097-310.1016/0001-6160(81)90097-3 ↗
7. J. HIRSCH and K. LUCRE: in ‘1st international conference on ahiminium alloys: their physical and mechanical properties’, (ed. E. A. Starke, Jr and T. H. Sanders, Jr), 1725; 1986, London, Chameleon Press.
8. 10.1179/msc.1974.8.1.7310.1179/msc.1974.8.1.73 ↗
9. H. E. VATNE, R. K. BOLINGBROKE, and E. NES: in ‘4th international conference on aluminium alloys: their physical and mechanical properties', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), Vol. 1, 251; 1994. Atlanta, GA, Georgia Institute of Technology.
10. 10.1179/mst.1996.12.3.20110.1179/mst.1996.12.3.201 ↗
11. 10.1016/0001-6160(85)90176-210.1016/0001-6160(85)90176-2 ↗
12. 10.1007/BF0265833510.1007/BF02658335 ↗
13. O. ENGLER, P. YANG, and G. GOTTSTEIN: in ‘4th international conference on aluminium alloys: their physical and mechanical properties', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), Vol. 1, 267; 1994. Atlanta, GA, Georgia Institute of Technology.
14. 10.1179/mst.1996.12.10.85910.1179/mst.1996.12.10.859 ↗
15. K. LUCRE and O. ENGLER: in ‘3rd international conference on aluminium alloys: their physical and mechanical properties', (ed. L. Arnberg et al.), Vol. 3, 439; 1992, Trondheim, Norwegian Institute of Technology.
16. B. ANDERSSON and S. E. NAESS: in ‘1st international conference on aluminium alloys: their physical and mechanical properties’, (ed. E. A. Starke, Jr and T. H. Sanders, Jr), 499; 1986, London, Chameleon Press.
17. o. DAALAND and E. NES: in ‘4th international conference on aluminium alloys: their physical and mechanical properties', (ed. T. H. Sanders, Jr and E. A. Starke, Jr), Vol. 1, 275; 1994. Atlanta, GA, Georgia Institute of Technology.
18. W. T. READ: ‘Dislocations in crystals’; 1953, New York, NY, McGraw-Hill.