journal article·2011-03

Ultrasonic spot welding of aluminium to steel for automotive applications—microstructure and optimisation

P. Prangnell, F. Haddadi, Y. C. Chen

Materials Science and Technology· Volume 27· Issue 3
Publisher page

Abstract

Energy efficient methods for joining aluminium to steel have potential for major applications in the automobile industry. Results are reported where 1 mm gauge 6111 aluminium and DC04 steel automotive sheet have been successfully joined using the novel process of high power ultrasonic spot welding. The microstructure and performance of the joints were examined, as a function of the welding conditions. A maximum failure load of 2·8 kN was obtained in lap shear tests, compared with 2·9 kN for comparable AI-AI joints. The failure mode changed from interfacial debonding to nugget pullout and back to interfacial failure as the weld energy increased. A thin <2 μm reaction layer of FeAI3 and Fe2Al5 formed at the interface with increasing weld energy. The factors determining the joint characteristics, interface reaction, and the microstructure evolution in the welds are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials, Manchester University, Grosvenor St., Manchester M1 7HS UK

References (29)

Show source-provided references
1. Qiu R., Iwamoto C., and Satonaka S. J. Mater. Proc. Technol., 2009, 209, 4186.10.1016/j.jmatprotec.2008.11.003 ↗
2. Harsha B., Hunt F., and Okamoto K.: in ‘Friction stir welding and processing’, (ed. Mishra R. S., and Mahoney M.W.), 235–272; 2007, Materials Park, OH, ASM International.
3. Bakavos D., and Prangnell P. B. Sci. Technol. Weld. Join., 2009, 14, 443.10.1179/136217109X427494 ↗
4. Chen Y.C., and Nakata K. Metall. Mater. Trans. A. 2008, 39A, 1985.10.1007/s11661-008-9523-4 ↗
5. Chen Y.C., Komazaki T., Kim Y. G., Tsumura T., and Nakata K. Mater. Sci. Forum, 2008, 580–582, 371.10.4028/www.scientific.net/MSF.580-582.371 ↗
6. Liyanage T., Kilbourne J., Gerlich A. P., and North T. H. Sci. Technol. Weld. Join., 2009 14, 500.10.1179/136217109X456960 ↗
7. Prangnell P. B., and Bakavos D. Mat. Sci. Forum, 2010. 638–642, 1237.10.4028/www.scientific.net/MSF.638-642.1237 ↗
8. Nishihara K., Watanabe T., and Yanagisawa A. Mater. Sci. Forum, 2010, 638–642, 611.10.4028/www.scientific.net/MSF.638-642.3733 ↗
9. Watanabe T., Sakuyama H., and Yanagisawa A. J. Mater Proc. Technol. 2009, 209 5475.10.1016/j.jmatprotec.2009.05.006 ↗
10. Bakavos D., and Prangnell P. B. Mater. Sci. Eng A., 527 (2010) 6320–6334.10.1016/j.msea.2010.06.038 ↗
11. Briskham P., Han L., Blundell N., Young K. W., Hewitt R., and Boomer D.: SAE, 2006 Congr. Detroit, MI, USA, April 2006, SAE, Paper 2006–01–0774.
12. Cheng X., and Li X. J. Micromech. Microeng. 2007, 17, 273.10.1088/0960-1317/17/2/013 ↗
13. Daniels H. P. C. Ultrasonics, 1965, 190.10.1016/0041-624X(65)90169-1 ↗
14. Murdeshwar N., and Krzanowski J. F. Metall. Mater. Trans., 1997, 28. 2663.10.1007/s11661-997-0023-8 ↗
15. Lum I., Jung J. P., and Zhu Y. Metall. Mater. Trans. A, 2005, 36A, 1279.10.1007/s11661-005-0220-2 ↗
16. Blandin G. D., Kuznetsov V. A., and Silin L. L. Weld. Prod., 1967, 10, 77.
17. Harthoorn J. L. · 1978
18. Watanabe T., Yoneda A., Yanagisawa A., Konuma S., and Ohashi O. Weld. Res. Abroad, 2000, 46, 19.
19. Flood G. Weld J., 1997, 76, 43.10.2307/25304191 ↗
20. Jahn R., Cooper R., and Wilkosz D. Metall. Mater. Trans. A, 2007, 38A, 570.10.1007/s11661-006-9087-0 ↗
21. Agudo L., Eyidi D., Schmaranzer C. H., Arenholz E., Jank N., Bruckner J., and Pyzalla A. R. J Mater. Sci., 2007, 42, 4205–4214.10.1007/s10853-006-0644-0 ↗
22. Kattncr U. R., and Burton B. P. ‘Phase diagrams of binary iron alloys’, (ed Okamoto H.), 12–28; 1993, Materials Park, OH, ASM International.
23. Takahashi Y., and Uesugi K. Acta Metall., 2003, 51, 2219.10.1016/S1359-6454(03)00015-6 ↗
24. Li M., Ji H., Wang C., Bang H., and Bang H. Ultrasonics, 2006, 45, 61.10.1016/j.ultras.2006.06.058 ↗
25. Rutherford J. L. · 1972
26. Bindumadhavan P. N., Madesh S., Gowrishankar N., Wah H. K., and Prabhakar O. Surf. Coat. Technol., 2000, 127, 252.10.1016/S0257-8972(00)00565-X ↗
27. Walser R. M., and Bene R. W. Appl Phys. Lett., 1982, 41. 529.
28. Heumann T., and Dittrich N. Z. Metalik, 1959, 50, 617.10.1515/ijmr-1959-501010 ↗
29. Manoj R., and Muneharu K. Q. J. JWS, 2003, 21, 282.