journal article·2026-05-13

A study of wear behaviour of additively Manufactured Co-Cr-Mo alloy after shot peening process

Erdogan Polat, Sercan Sabanci, Ibrahim Etem Saklakoglu

Publisher page

Abstract

This study investigates the effects of shot peening (SP) on the wear behavior of laser powder bed fusion (L-PBF) manufactured Co-Cr-Mo alloys in as-built and heat-treated (HT) conditions. SP significantly increased surface hardness, reaching 685 HV via sub-structural refinement and strain-induced gamma-to-epsilon martensitic transformation (63.04% ɛ-HCP in HT + SP), confirmed by XRD analysis. The results show that the transformation-induced plasticity (TRIP) effect and dynamic work-hardening provide superior wear resistance (4.95 × 10 −5 mm 3 /Nm) in the HT + SP condition. Furthermore, SP-induced surface reactivity facilitates the formation of protective tribo-oxide films, thereby transitioning the mechanism into a self-lubricating regime. Wear test findings demonstrate that SP enhances surface integrity and may eliminate the need for post-process heat treatment in industrial and biomedical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Iskenderun Technical University Faculty of Engineering and Natural Sciences

Ege University Faculty of Engineering

References (37)

Show source-provided references
1. 10.3390/ma1704093410.3390/ma17040934 ↗
2. 10.1016/j.addma.2020.10161910.1016/j.addma.2020.101619 ↗
3. 10.1016/j.surfcoat.2019.12527310.1016/j.surfcoat.2019.125273 ↗
4. 10.1007/s12540-019-00290-710.1007/s12540-019-00290-7 ↗
5. 10.1016/S0924-0136(00)00893-110.1016/S0924-0136(00)00893-1 ↗
6. 10.1007/s00170-025-15058-010.1007/s00170-025-15058-0 ↗
7. 10.1007/s11665-023-08592-z10.1007/s11665-023-08592-z ↗
8. 10.1016/j.surfcoat.2021.12737810.1016/j.surfcoat.2021.127378 ↗
9. 10.1021/acsami.2c0197710.1021/acsami.2c01977 ↗
10. Toh WQ, Tan X, Sun Z, et al. Comparative study on tribological behavior of Ti-6Al-4V and Co-Cr-Mo samples additively manufactured with electron beam melting. In: proceedings of the 2nd international conference on progress in additive manufacturing, 2016, pp. 342–348.
11. 10.3389/fmech.2015.0000210.3389/fmech.2015.00002 ↗
12. 10.3390/ma1509326310.3390/ma15093263 ↗
13. 10.1016/j.jmatprotec.2020.11680610.1016/j.jmatprotec.2020.116806 ↗
14. 10.1002/adem.20210092810.1002/adem.202100928 ↗
15. 10.1016/j.jallcom.2025.17989310.1016/j.jallcom.2025.179893 ↗
16. BEGO. WIRONIUM® RP: Instructions for use [Data sheet]. https://www.bego.com/fileadmin/user_downloads/Mediathek/Medical/Werkstoffe/WIRONIUM-RP/EN/de_19790_0000_ga_en.pdf (2020 accessed 30 January 2026).
17. SAE International. Procedures for using standard shot peening test strip. Warrendale PA https://www.sae.org/standards/content/j443_201001/ (2010).
18. 10.1051/metal/19504702013910.1051/metal/195047020139 ↗
19. 10.1109/TSMC.1979.431007610.1109/TSMC.1979.4310076 ↗
20. 10.1016/j.msea.2018.04.04810.1016/j.msea.2018.04.048 ↗
21. 10.1016/j.addma.2020.10172510.1016/j.addma.2020.101725 ↗
22. 10.1179/02670839910150569910.1179/026708399101505699 ↗
23. 10.1016/j.msea.2010.12.02410.1016/j.msea.2010.12.024 ↗
24. 10.1016/j.jmbbm.2018.10.03810.1016/j.jmbbm.2018.10.038 ↗
25. 10.1016/j.jmbbm.2015.10.02110.1016/j.jmbbm.2015.10.021 ↗
26. 10.12693/APhysPolA.142.74110.12693/APhysPolA.142.741 ↗
27. 10.1016/j.wear.2021.20375810.1016/j.wear.2021.203758 ↗
28. 10.1016/j.actamat.2013.11.00510.1016/j.actamat.2013.11.005 ↗
29. 10.1016/j.scriptamat.2010.08.00610.1016/j.scriptamat.2010.08.006 ↗
30. 10.1016/j.jmbbm.2015.12.03910.1016/j.jmbbm.2015.12.039 ↗
31. 10.3390/met1102035510.3390/met11020355 ↗
32. 10.1016/j.actamat.2006.10.00510.1016/j.actamat.2006.10.005 ↗
33. 10.1016/j.wear.2013.12.01010.1016/j.wear.2013.12.010 ↗
34. 10.3390/encyclopedia503012410.3390/encyclopedia5030124 ↗
35. Şaban Hakan Atapek A, Tsanka Dikova A, Aktaş G, et al. Tribo-corrosion behavior of cast and selective laser melted Co-Cr alloy for dental applications. Machines Technologies Materials 2016; 10: 61–64.
36. 10.1016/j.wear.2014.07.02210.1016/j.wear.2014.07.022 ↗
37. 10.1007/s11665-012-0261-910.1007/s11665-012-0261-9 ↗