journal article·2018-09

Effect of interfacial compounds on mechanical properties of titanium–steel vacuum roll-cladding plates

De-han Yang, Zong-an Luo, Guang-ming Xie, R. D. K. Misra

Materials Science and Technology· Volume 34· Issue 14
Publisher page

Abstract

The titanium–steel clad plates were prepared by vacuum roll cladding. Ti–Fe compounds and TiC were observed at different cooling rates after rolling. Optical microscopy, electron microprobe analyser, X-ray diffraction and shear test studies were carried out to study the effect of Ti–Fe compounds and TiC on the ultimate microstructure and mechanical properties of titanium–steel clad plates. At a cooling rate of 6.2°C/min, TiC and Ti–Fe compounds seriously impacted the mechanical properties of the clad plate. At a cooling rate of 1.8°C/min, the thickness of the TiC layer was optimal much that the maximum shear strength of 296 MPa was obtained. At a cooling rate of 0.6°C/min, the thickness of the TiC layer was relatively thick, which affected the mechanical properties of clad plates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso, El Paso, USA

Funding

National Key Research and Development Program of China · Fundamental Research for the Chinese Central Universities

References (30)

Show source-provided references
1. 10.1016/j.matdes.2015.12.12010.1016/j.matdes.2015.12.120 ↗
2. 10.1016/j.jallcom.2016.02.12010.1016/j.jallcom.2016.02.120 ↗
3. 10.1179/026708309X1259571230587010.1179/026708309X12595712305870 ↗
4. Refaey AE · Weld J · 2008 · 87 · 113S
5. 10.1016/S1875-5372(15)60016-910.1016/S1875-5372(15)60016-9 ↗
6. 10.1016/j.msea.2016.05.06610.1016/j.msea.2016.05.066 ↗
7. 10.1016/S1006-706X(15)30099-610.1016/S1006-706X(15)30099-6 ↗
8. 10.1016/j.msea.2008.04.03210.1016/j.msea.2008.04.032 ↗
9. 10.1016/j.msea.2017.03.11810.1016/j.msea.2017.03.118 ↗
10. 10.1016/j.msea.2007.11.11210.1016/j.msea.2007.11.112 ↗
11. 10.2320/matertrans.M201112710.2320/matertrans.M2011127 ↗
12. 10.1016/S0020-7403(99)00068-510.1016/S0020-7403(99)00068-5 ↗
13. 10.1007/s40195-013-0283-910.1007/s40195-013-0283-9 ↗
14. 10.1016/j.msea.2015.11.04110.1016/j.msea.2015.11.041 ↗
15. Ramirez JE. · Weld J · 2014 · 93 · 338S
16. 10.1533/wint.2004.332010.1533/wint.2004.3320 ↗
17. 10.1007/s11661-014-2671-910.1007/s11661-014-2671-9 ↗
18. 10.1016/j.msea.2005.07.01010.1016/j.msea.2005.07.010 ↗
19. 10.1016/S1359-6462(01)01041-710.1016/S1359-6462(01)01041-7 ↗
20. 10.1016/j.proeng.2011.04.16410.1016/j.proeng.2011.04.164 ↗
21. 10.2320/matertrans.M201314710.2320/matertrans.M2013147 ↗
22. 10.1016/S1003-6326(14)63113-710.1016/S1003-6326(14)63113-7 ↗
23. 10.1016/0022-5088(90)90347-M10.1016/0022-5088(90)90347-M ↗
24. 10.2355/isijinternational.50.146010.2355/isijinternational.50.1460 ↗
25. 10.2355/isijinternational.30.97810.2355/isijinternational.30.978 ↗
26. 10.1007/BF0054001810.1007/BF00540018 ↗
27. 10.1016/j.jnucmat.2003.07.00410.1016/j.jnucmat.2003.07.004 ↗
28. 10.1007/s11661-007-9357-510.1007/s11661-007-9357-5 ↗
29. 10.1111/j.1151-2916.1998.tb02555.x10.1111/j.1151-2916.1998.tb02555.x ↗
30. 10.1016/j.jpowsour.2013.07.06910.1016/j.jpowsour.2013.07.069 ↗